During the production and processing of coal, burning it for energy production may cause a series of environmental pollution due to the amount of sulphur in it. When the consumed sulphur in coal is in the form of sulphur dioxide at the end of combustion, it reacts with water at high altitudes. Moreover, it goes down to the earth in the form of sulphuric acid, as well as damaging plants. The corrosive harmful impact on industrial plants is the removal of the sulphur in the coal when it is environmental. Microorganisms that use sulphur as food to eliminate the anxiety of clean production brought about by the chemical method. This review determined the study contains information about which microorganism is effective in removing sulphur in coal and also the types of organisms that should be according to the organic sulphur type in coal.
23 March 2022 in Environmental Progress & Sustainable Energy
In this paper, the direct liquefaction of Turkish Niğde-Ulukışla oil shale in noncatalytic and catalytic conditions was studied. The effects of pressure, tetralin/oil shale ratio, catalyst type and concentration, reaction time and temperature and oil shale/waste paper ratio on the process were investigated. It was found that tetralin/oil shale ratio had no considerable effect on the total and liquefaction products conversions under the noncatalytic conditions. Fe2O3, MoO3, Mo(CO)6, Cr(CO)6 and zeolite were used as catalysts in catalytic liquefaction. The highest total and liquefaction products conversions were obtained using MoO3 as catalyst at a concentration of 9% by weight. Reaction temperature of 400 °C and reaction time of 90 minutes were chosen according to obtained liquefaction results. Co-liquefaction experiments were performed using waste paper. Both the total and oil + gas conversions were increased to a considerable extent by the application of the co-liquefaction process. According to gas chromatographic-mass spectrometric (GC-MS) analysis, the liquid product from the liquefaction process of oil shale under catalytic conditions of experiment 22 consisted mainly of naphthalene and its derivatives and polycyclic hydrocarbon such as indene and its derivatives.