Mixed recycled aggregate (MRA) is a kind of recycled aggregate containing discarded bricks and other impurities that is inferior to ordinary recycled concrete aggregate. To study the effect of MRA in concrete, specimens with 100% MRA under different water–cement ratios (W/C) of 0.50, 0.42, 0.36 and 0.30 were prepared, and the mechanical properties and microstructure were tested. Results show that compared with ordinary concrete, the compressive strength of mixed recycled aggregate concrete (MRAC) with the same W/C was reduced by more than 50% at 28 days, but the axial compression ratio was relatively high, reaching over 0.87. Affected by the high water absorption of MRA, the hydration rate of cement slowed, which was beneficial to the long-term development of the properties of MRAC. An appropriate increase in cement content could strengthen MRA and densify the pore structure of MRAC. The research results of this article prove that MRA has high utilization value and could be used to prepare MRAC with application potential using optimal gradation, which is of positive significance for promoting the consumption of construction waste.
Moisture diffusion in cement-based materials significantly impacts its durability. In this study, we analyzed the effect of adding a waterproofing agent and nano-SiO2 (NS) on the water transportation process in mortar using capillary water absorption tests and nuclear magnetic resonance (NMR) technology. The results indicate that the combined action of the waterproofing agent and nano-SiO2 drastically reduce the capillary water absorption coefficient and have a more significant impact than only adding the waterproofing agent. The moisture diffusion in different sections of the mortar during the water absorption process is obtained from the NMR test results and two function models. Comparative studies indicate that the NMR test results have good correlation with the capillary water absorption test results and provide accurate process data. The NMR analysis results offer a new analytical method to characterize the porosity of cement-based materials by continuously monitoring small-pitch sections.