The influences of applied pressure on the structure, mechanics, dislocation, and electronics properties of an FeTi hydrogen storage alloy are theoretically investigated via first-principles calculations. The lattice parameter ratio, elastic constant, Young’s modulus, bulk modulus, shear modulus, ductile/brittle, Poisson’s ratio, anisotropy, Cauchy pressure, yield strength, Vickers hardness and energy factor are discussed versus applied pressure. The results show that the FeTi alloy exhibits good mechanical stability under applied pressure between 0 and 50 GPa, and the mechanical properties are significantly improved under applied pressure, like the resistances to elastic, bulk, and shear deformations, the material ductility and metallicity, as well as Vickers hardness and yield strength. Moreover, the electronic structures reveal that the FeTi alloy has metallic properties and the structural stability of the FeTi hydrogen storage alloy is enhanced at high pressure. This work provides significant value for high-pressure applications of FeTi alloys in hydrogen storage and supply fields.

The effects of 44 types of elements on the stabilities of I1-constitute multi-type long-period stacking-ordered (LPSO) structures in Mg alloys, such as 4H, 6H, 8H, 9R, 12H, 15R, and 16H phases, are systematically investigated by first-principle high-performance calculations. The intrinsic stacking-fault energies (ISFEs) and their increments are calculated along with the formation enthalpies of solute atoms, and interaction energies between solute atoms and LPSO structures. The results suggest that the 15R phase is the easiest to form and stabilize among these LPSO structures, and 44 types of solute atoms have different segregation characteristics in these LPSO structures. A high temperature inhibits structural stabilizations of the LPSO phases, and these alloying elements, such as elements (Sb, Te, and Cs) for 4H; elements (S, Fe, Sb, and Te) for 6H, 8H, 9R, 15R, and 16H; and elements (S, Sb, and Te) for 12H, can effectively promote the stability of LPSO structures at high temperatures. S and Fe atoms are the most likely to promote the stabilities of the 16H structure with regard to other LPSO phases, but the Fe atom tends to inhibit the stabilities of 4H and 12H structures. This work can offer valuable references to further study and develop high-performance Mg alloys with multi-type LPSO structures.

The structural, mechanical, dislocation, and electronic properties of the Sc₃AlC MAX phase under applied pressure are investigated in detail using first-principles calculations. Key parameters, including lattice parameter ratios, elastic constants, Young’s modulus, bulk modulus, shear modulus, brittle-to-ductile behavior, Poisson’s ratio, anisotropy, Cauchy pressure, yield strength, Vickers hardness, and energy factors, are systematically analyzed as a function of applied pressure. The results demonstrate that the Sc₃AlC MAX phase exhibits remarkable mechanical stability within the pressure range of 0 to 60 GPa. Notably, applied pressure markedly improves its mechanical properties, such as resistance to elastic, bulk, and shear deformations. The B/G ratio suggests a tendency toward ductile behavior with increasing pressure, and the negative Cauchy pressure indicates the directional characteristics of interatomic bonding in nature. Vickers hardness and yield strength increase under pressures of 0 to 10 GPa and then decrease sharply above 50 GPa. High pressure suppresses dislocation nucleation due to the increased energy factors, along with twinning deformation. Furthermore, electronic structure analysis confirms that high pressure enhances the interatomic bonding in the Sc₃AlC MAX phase, while the enhancement effect is not substantial. This study offers critical insights for designing MAX phase materials for extreme environments, advancing applications in aerospace and electronics fields.

High-entropy perovskite oxides attract considerable attention due to their outstanding properties and extensive applications. In this work, the lattice distortion and the mechanical, thermal and electronic structure properties of high-entropy (Ca_0.2Sr_0.2Ba_0.2La_0.2Pb_0.2)TiO₃ (CSBLPT) are investigated through first-principles calculations. The results suggest that the influence of O atoms on lattice distortion is predominant, and the effect of overall A-site atoms plays a distinctly greater role than that of the B-site atoms. The mechanical results show that the high-entropy CSBLPT has a lower Young’s modulus and higher fracture toughness than ternary SrTiO₃. The Debye temperature also indirectly indicates that the thermal expansion coefficient of the studied high-entropy perovskite is greater than that of SrTiO₃. As for thermal conductivity, the obtained result of CSBLPT is also appreciably lower than that of SrTiO₃, and the lowest thermal conductivity is along the [100] direction. The Fermi level of high-entropy CSBLPT is transferred to the conduction band, exhibiting a degenerate n-type semiconductor behavior with metallic-like characteristics, and the Bader charge values are also related to the local lattice distortion, which may cause differences in thermomechanical properties between high-entropy CSBLPT and SrTiO₃. Above all, high-entropy CSBLPT is a preferable TBC material with excellent performance under working conditions compared to SrTiO₃.