oluwayomi balogun

Dr. oluwayomi balogun

Prototype engineering development institute Osun state Nigeria, Osogbo, Osun, Nigeria
orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
Verified
Journal Article
Open access
PDF file
OOOladele Isiaka Oluwole
Oladele Isiaka Oluwole
Christian Junior OkoroChristian Junior Okoro
Christian Junior Okoro
Anuoluwapo Samuel TAIWOAnuoluwapo Samuel TAIWO
Anuoluwapo Samuel TAIWO
LOLinus N. Onuh
Linus N. Onuh
NANewton Itua Agbeboh
Newton Itua Agbeboh
SLSenzeni Sipho Lephuthing
Senzeni Sipho Lephuthing
Thermoplastics and thermosetting plastics are two major classes of polymers in that have recently become materials that are indispensable for humankind. Regarding the three basic needs of human beings—food, shelter, and clothing—polymers and polymer-based materials have gained pre-eminence. Polymers are used in food production, beginning with farming applications, and in the health sector for the development of various biomaterials, as well as in shelter and clothing for a variety of applications. Polymers are the material of choice for all modern-day applications (transportation, sporting, military/defence, electronics, packaging, and many more). Their widespread applications have created many negative challenges, mainly in the area of environmental pollution. While thermoplastics can be easily reprocessed to obtain new products, thermosetting plastics cannot; thus, this review focuses more on the use of waste from thermoplastics with less emphasis on thermosetting plastics. Hence, the review presents a concise summary of the availability of waste thermoplastics as raw materials for product development and the anticipated benefits. The prospects for waste thermoplastics and thermosetting plastics, the possibility of cleaning the environment, and the uncovering of opportunities for further research and development are presented. The limitations of the current methods of waste polymer recycling are highlighted with possible future prospects from newly introduced methods. With zero tolerance for polymer waste in our environments, potential uses for recycled thermosetting plastics are described. Waste polymers should be seen as potential raw materials for research and development as well as major materials for new products. Recycled polymers are expected to be processed for use in advanced materials applications in the future due to their availability. This review shows that the major source of environmental pollution from polymers is the packaging, hence the need to modify products for these applications by ensuring that most of them are biodegradable.

1 December 2020 in Fibers
Verified
Journal Article
Open access
PDF file
OOOladele Isiaka Oluwole
Oladele Isiaka Oluwole
OMOmokafe Michael
Omokafe Michael
AAAdeolu Adediran
Adeolu Adediran
OBoluwayomi balogun
oluwayomi balogun
Folorunso AjagbeFolorunso Ajagbe
Folorunso Ajagbe
This work was on the comparative evaluation of the property effects obtainable when acetylation is applied to parts of selected agro fibers that are obtainable within common localities. The fibers were subjected to different concentrations of acetylation treatment at ambient temperature for 3 h. The physico-chemical, morphological, and tensile properties of the fibers were examined after the treatment. It was discovered from the results that the procedures variedly influenced the constituents of the fibers, their resulting tensile properties as well as their post-acetylation treatment surface morphology. The proportion of crystalline cellulose in the starting fibers greatly influenced their post treatment composition, behaviour and properties. The results show that plantain fibers had the highest aspect ratios, followed by banana fibers with values of about 1000 and 417, respectively. These fibers exhibited the least density and are thus potential plant fibers for composite development. Banana fiber had the least density of about 1.38 g/cm3 while that of DombeyaBuettneri fiber possessed the highest value of 1.5 g/cm3. There was significant enhancement in the hemicellulose content of Combretum Racemosum, while the lignin content of the plantain fibers was highly reduced. The treatment favoured the enhancement of the tensile properties in Combretum Racemosum fibers, which had enhanced tensile strength and strain at all compositions of the treatment. Optimum tensile strength and strain values of 155 MPa and 0.046, respectively, are achieved at 4% composition. Dombeya Buettneri fibers showed the highest ultimate tensile strength among the plant fibers in the untreated condition, which was gradually decreased as the concentration of the reagents was increased. Overall, 4% acetylation treatment is optimum for tensile properties’ enhancement for most of the natural fibers evaluated.

1 February 2023 in Ceramics
Verified
Journal Article
Open access
PDF file
AAAbayomi Adewale Akinwande
Abayomi Adewale Akinwande
ASAdesina Olanrewaju Seun
Adesina Olanrewaju Seun
AAAdeolu Adediran
Adeolu Adediran
OBOluwatosin Abiodun Balogun
Oluwatosin Abiodun Balogun
DMDavid Mukuro
David Mukuro
SMSaravana kumar Murugesan
Saravana kumar Murugesan
The use of ashes derived from various waste sources as supplements to synthesized ceramic reinforcement in metal matrices has been established. However, studies involving a combination of particulates from three different sources are rare. In a bid to further knowledge in this aspect of research and develop a green aluminium composite for automobile applications, the present investigation studied the implication of adding palm kernel shell ash (PKA), rice husk ash (RHA), and waste steel particles (STP) to the morphology and strength behaviour of Al-6061-T6 alloy. The experimental design was undertaken via the Box–Behnken design (BBD) of the response surface method. A 4% STP at a constant dose was mixed with PKA and RHA at varying proportions and stirring temperatures according to the BBD. The experimental outcome revealed that the responses were greatly influenced by microstructural evolution. From the surface plots, 2–4% RHA and PKA enhanced tensile and flexural strengths, while 4–6% led to a decline in strength. Meanwhile, 2–6% of the particles are favourable to the enhancement of tensile and compressive strengths and moduli. Temperatures between 700 and 800 °C favored response improvement, whereas temperatures between 800 and 900 °C were detrimental to responses. Developed regression models for the responses were validated to be good representations of the experimental outcomes. The optimum mix was obtained at 4.81% PKA, 5.41% RHA, and a stirring temperature of 803 °C. The validation experiment conducted portrayed reliable responses with <5% deviation from the predicted values, thereby certifying the models to be statistically fit for future predictions.

17 October 2020 in International Journal of Polymer Science
Verified
Journal Article
Open access
PDF file
OBoluwayomi balogun
oluwayomi balogun
AAAdeolu Adediran
Adeolu Adediran
JOJoseph Omotoyinbo
Joseph Omotoyinbo
KAKenneth Alaneme
Kenneth Alaneme
OOOladele Isiaka Oluwole
Oladele Isiaka Oluwole
This study evaluates the water diffusion mechanism on mechanical properties of polypropylene reinforced composites. Compounding of the composites into sheets was carried out using the compression moulding techniques by incorporating varying weight percentage of fibers and polypropylene. Mechanical properties of the composites were assessed according to ASTM standards, while the composite fracture surface was examined using a scanning electron microscope. The water absorption behaviour and diffusion mechanisms on mechanical properties of fabricated composites were analysed using a water immersion test and the Fickian diffusion model. The results show that mechanical properties of all polypropylene reinforced composites under dry condition was higher than wet condition. The composites reinforced with 7 wt.% (KOH and NaOH) fibers follow a consistent trend and gave the highest tensile strength and tensile modulus in comparison with pure PP (polypropylene). Addition of fibers into the polypropylene matrix gradually decreases composites impact strength with exception to 3 wt.% and 5 wt.% composites. The hardness properties of reinforced composites were steadily increased as the fiber loading increases which signify strong fiber-matrix bonding. The percentage of water absorbed for all reinforced composites increased as the fiber weight increases and slowly flattened off after 10 days of saturation. The morphological study revealed fiber pullout and delamination of reinforced composites attributed to poor fiber-matrix adhesion amount to water intake. The diffusion transport mechanism of polypropylene composites was observed to obey the Fickian diffusion model.

20 March 2022 in Fibers
Verified
Journal Article
Open access
PDF file
OBoluwayomi balogun
oluwayomi balogun
KAKenneth Kanayo Alaneme
Kenneth Kanayo Alaneme
AAAdeolu Adediran
Adeolu Adediran
OOOladele Isiaka Oluwole
Oladele Isiaka Oluwole
JOJoseph Ajibade Omotoyinbo
Joseph Ajibade Omotoyinbo
KTKong Fah Tee
Kong Fah Tee
This study investigates the physical and mechanical properties of short Entada mannii- glass fiber polypropylene hybrid composites. The polymeric hybrid composite was produced by combining different ratios of Entada mannii fiber (EMF)/glass fiber (GF) using the compression molding technique. The tensile properties, compressive strength, impact strength and hardness were evaluated while the fracture surface morphology was examined using the scanning electron microscope (SEM). It further evaluates the moisture absorption and percentage void content of the developed composites. The experimental results show that tensile, compressive, impact and hardness properties of all the hybrid composites were significantly improved as compared with single reinforced composites. Specifically, hybrid composites (EMF/GF5) revealed an overall tensile strength of 41%, hardness of 51% and compressive strength of 47% relative to single reinforced composites, which can be ascribed to enhanced fiber–matrix bonding. The chemical treatment enhanced the EMF fiber surface and promoted good adhesion with the polypropylene (PP) matrix. Moisture absorption properties revealed that the addition of EMF/GF reduces the amount of moisture intake of the hybrid composites attributed to good cementing of the fiber–matrix interface. Morphological analysis revealed that single reinforced composites (EMF1 and GF2) were characterized by fiber pullout and deposition of voids in the composite as compared with the hybrid composites.

15 December 2020 in Advanced Technologies & Materials
Verified
Journal Article
Closed access
OOOladele Isiaka Oluwole
Oladele Isiaka Oluwole
OBOpeyemi Emmanuel Barbarinde
Opeyemi Emmanuel Barbarinde
OAOkikiola Ganiu Agbabiaka
Okikiola Ganiu Agbabiaka
MAMicheal Hope Adegun
Micheal Hope Adegun
AOAdelani Samson Oluwagbenga
Adelani Samson Oluwagbenga
OBoluwayomi balogun
oluwayomi balogun
The development of hybrid cellulosic-keratinous fibers reinforced epoxy composites was investigated in this study. Hybrid composites were fabricated by mixing coir fiber (CF) and chicken feather fiber (CFF) with the epoxy matrix in a randomly dispersed approach. The mechanical properties such as tensile, flexural and hardness properties were determined. Also, wear property, thermal conductivity and moisture absorption potentials of the developed composites were studied while the surface morphology of the composite fracture surface was examined using scanning electron microscopy (SEM). The results revealed that all the selected properties were improved compared to the unreinforced epoxy matrix. Sample with 1% CF and 2% CFF gave the optimum results and the combination of good mechanical, wear, thermal insulating and moisture resistance properties. It was discovered that higher volume of CFF in synergy with low volume of CF was responsible for performance. The results revealed that the materials can be used in automobile due to the inclusion of light-weight bio-fibers that gave good insulating properties in epoxy composites in conjunction with good mechanical, wear and moisture resistance.