Ramez Hajj

Dr. Ramez Hajj

Department of Civil & Environmental Engineering, The Grainger College of Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 February 2017 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
Ramez HajjRamez Hajj
Ramez Hajj
ABAmit Bhasin
Amit Bhasin
Fatigue cracking is a common form of pavement failure and is strongly tied to the properties of the asphalt binder used in the mix. The Superpave grading procedure is currently used in the United States and in other parts of the world to classify and select asphalt binders for the design of asphalt mixtures. The parameter, , in the Superpave grading system is used to control the quality of the binder at intermediate temperatures. It is also used by many as a metric to measure the inherent fatigue cracking resistance of an asphalt binder. It is widely recognised that while this parameter was a significant improvement over previous binder grading and selection methods, it does not accurately measure the inherent fatigue damage resistance of asphalt binders. This paper provides a review of several studies that have attempted to develop methods to measure the fatigue damage resistance of asphalt binders during the last two decades. The studies reviewed in this paper have been classified into four main categories based on the type of test method employed. The four categories include: time sweep performed using the Dynamic Shear Rheometer (DSR), amplitude sweep using the DSR or its variations, ductility-based test methods and strength-based tests. This paper focuses primarily on tests developed in the United States with an emphasis to improve the existing Superpave criteria along with relevant research from other parts of the world.


21 November 2023 in Construction and Building Materials
Verified
Journal Article
Closed access
BABabak Asadi
Babak Asadi
Ramez HajjRamez Hajj
Ramez Hajj

19 June 2019 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
PDF file
Ramez HajjRamez Hajj
Ramez Hajj
AFAngelo Filonzi
Angelo Filonzi
SRSyeda Rahman
Syeda Rahman
ABAmit Bhasin
Amit Bhasin
The low-temperature properties of asphalt binder have attracted attention in recent years thanks to an increase in the use of reclaimed asphalt pavements (RAP). Traditional methods to evaluate the low-temperature properties of the binder require a large amount of binder that needs to be recovered from RAP samples for testing with a Bending Beam Rheometer (BBR). To economize on sample size for RAP materials and also for emulsion residues, previous researchers have explored the potential of using a 4 mm diameter specimen with a Dynamic Shear Rheometer (DSR) in lieu of the BBR. To compare results from frequency sweep tests conducted using the DSR with results from the BBR, data from the former need to be converted to time domain and subsequently from a shear load response to an axial load response. Previous research studies have developed methods to accomplish these two conversions to compare data from the DSR with data from the BBR. The objective of this study is to examine some of these methods from the literature and elsewhere based on the principles of linear viscoelastic interconversion using a set of 11 different binders. Results using different analytical approaches from this study show that the DSR has good repeatability and verify that it can be used as a surrogate for the BBR to determine low-temperature properties, while exercising some caution with some of the assumptions related to Poisson’s ratio.

28 January 2023 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
BABabak Asadi
Babak Asadi
Ramez HajjRamez Hajj
Ramez Hajj
Imad Al-QadiImad Al-Qadi
Imad Al-Qadi

27 July 2020 in International Journal of Pavement Engineering
Verified
Journal Article
Closed access
ASAnand Sreeram
Anand Sreeram
ZLZhen Leng
Zhen Leng
Ramez HajjRamez Hajj
Ramez Hajj
WFWellington L. G. Ferreira
Wellington L. G. Ferreira
ZTZhifei Tan
Zhifei Tan
ABAmit Bhasin
Amit Bhasin
Determining the permissible amount of reclaimed asphalt pavement (RAP) in new pavement mixes is a design challenge for pavement practitioners due to the limited understanding regarding the interaction between the aged and unaged binders in these mixtures. In this study, the solubility related molecular interactions of blended binders comprising of aged-unaged fractions was evaluated using an extension of the Hansen Solubility Parameter (HSP) model. Virgin binder was blended with aged binders from two different sources, at proportions of 15%, 30%, and 50%. These binder blends were evaluated using a method of titrations to identify their internal stability and relative extents of intermolecular interactions in terms of dispersive forces, hydrogen bonding, and polar interactions. The results implied that small proportions of aged binders have limited effect on the original stability of the unaged binders. Further Fourier transform infrared spectroscopy and gel permeation chromatography tests revealed that the oxidative elements in the blended binders increased with the increasing percentage of aged binders. It is theorized that these fractions will affect the polydispersity of the molecules through increased molecular associations. It is advised that incorporation of higher RAP contents in mixtures should ideally involve some consideration of the chemistries of the intermixing binders.