The aim of this work is to simulate the fragmentation of bullets impacted through granular media, in this case, sand. In order to validate the simulation, a group of experiments were conducted with the sand contained in two different box prototypes. The walls of the first box were constructed with fiberglass and the second with plywood. The prototypes were subjected to the impact force of bullets fired 15 m away from the box. After the shots, X-ray photographs were taken to observe the penetration depth. Transient numerical analyses were conducted to simulate these physical phenomena by using the smooth particle hydrodynamics (SPH) module of ANSYS® 2019 AUTODYN software. Advantageously, this module considers the granular media as a group of uniform particles capable of transferring kinetic energy during the elastic collision component of an impact. The experimental results demonstrated a reduction in the maximum bullet kinetic energy of 2750 J to 100 J in 0.8 ms. The numerical results compared with the X-ray photographs showed similar results demonstrating the capability of sand to dissipate kinetic energy and the fragmentation of the bullet caused at the moment of impact.
A sound suppressor is an internal or external device coupled to the barrel of a firearm. Its development has been historically related to the negative effects produced by the noise. This article presents the numerical and experimental analysis of a sound suppressor for a 5.56 mm caliber rifle. It was designed, manufactured, and tested inside a shooting tunnel for 911 m/s and 344 m/s velocities. Three geometric configurations with curved deflectors, conical deflectors, and finally with a reactive spiral capable of dissipating the acoustic wave were compared considering reactive and dissipative systems. The attenuation of the sound inside the silencer depends directly on the reduction of the projectile wave velocity and the deflagration of the gases at the instant of firing. Then the MIL-STD-1474E standard was used to carry out the experiments. The results in the computational numerical simulation show an average value of 143 dB for the considered three models, the Sound Pressure Level in the reactive core model decreased by 25% with respect to other proposals, which have an average value of 141 dB. These results can be useful to improve in the design of sound suppressors based on the needs of the users and under the specific characteristics of each weapon ballistic.
This work presents a preliminary “Strengths, Weaknesses, Opportunities, and Threats” (SWOT) analysis followed by a “Correct, Adapt, Maintain, and Explore” (CAME) analysis on wood sawdust biofuel. New designs of sawdust biofuels boilers and reactors require gathering relevant information on the main characteristics of sawdust biofuels. Optimisation algorithms require not only the numerical parameters needed to find optimal solutions but also the consideration of scenarios related to the use of this type of biofuel. This work provides complementary information to create a comprehensive framework for assessing the viability and sustainability of integrating wood sawdust into diverse energy production systems. This includes an examination of the current state of sawdust utilisation, its environmental implications, and the potential of valorising this abundant biomass resource. This review further delves into the technical aspects of converting sawdust into biofuel pellets, examining various technical processes involved in its physical analysis. The intended audience of this review encompasses researchers, mechanical designers, policymakers, and industry strategists and stakeholders interested in sustainable energy solutions and waste management strategies, providing a holistic perspective on the opportunities presented by wood sawdust as a renewable energy source.
25 January 2025 in International Journal of Hydrogen Energy