State Key Laboratory of Mechanics and Control of Mechanical Structures, College of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics
Prof. Ying Yang
State Key Laboratory of Mechanics and Control of Mechanical Structures, College of Aerospace Engineering,Nanjing University of Aeronautics and Astronautics
Traveling wave rotary ultrasonic motors (TRUSMs) have been applied in optical systems, robotics, biomedical and other fields. However, the disadvantages such as short working life, driving performance degradation, and low energy utilization significantly limit the long-term and stable operation of TRUSMs in advanced fields like aerospace mechanisms. To address the above issues, a novel rotary ultrasonic motor based on multiple Langevin transducers is proposed in this paper. First, the structural design, driving principle and general design criteria are described in detail. Then, the structural parameters are optimized by finite element simulation analysis. Second, a prototype is assembled controllably. Subsequently, the impedance test and vibration measurement are carried out. The results show that the traveling wave is successfully generated on the tooth-ring, and all the Langevin transducers are excited to the first-order longitudinal vibration modes, which strongly verify the correctness of design principle. Finally, the driving performance experiment is carried out. The experimental results show that the no-load speed is 62 r min−1 under the pre-pressure of 10 N. The stalling torque is 0.94 N m at the driving voltage of 500 Vp-p. The response characteristics show that the start/stop time are 4.6/5.5 ms, and the angular displacement resolution of clockwise/counterclockwise driving are 6.7/10.2 μrad. The motor proposed in this paper not only exhibits relatively high output performance with excellent vibration characteristics, but also maintains compactness of the structure. The sandwiched structure design effectively avoids the problem that the bonded-type piezoceramic rings in conventional TRUSMs are prone to damage or fall-off when vibrating for a long time. Furthermore, the general design criteria provide a new approach to develop high performance rotary ultrasonic motors. The proposed novel ultrasonic motor is expected to meet the demand for long-term and stable operation in aerospace mechanisms.
This paper reports a digital microfluidic technology that combines surface wettability gradient and surface acoustic waves. The technology enables selection of the driven object, facilitating reactions among multiple droplets and improving the precision of droplet control. Octagonal patterns with a wetting gradient and orthogonally distributed interdigital transducers were created on the surface of a LiNbO3 wafer by photolithography. Leveraging the propagation characteristics of surface acoustic waves on different wetting models, the latter serve as a switch for microfluidic motion, successfully achieving selection of the driven object and demonstrating sequential reactions among multiple droplets. Also, under the excitation of standing surface acoustic waves, droplets on the wetting gradient surface move slightly in the direction of wetting gradient descent, significantly enhancing the positional accuracy of the droplets to the micrometer level. With the advantages of surface acoustic wave digital microfluidics, this technology addresses the challenges of multi-droplet digital manipulation and improved droplet positional accuracy.