JIANMIN QIU

Mr. JIANMIN QIU

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 April 2024 in Smart Materials and Structures
Verified
Journal Article
Open access
PDF file
XMXinchi Ma
Xinchi Ma
Ying YangYing Yang
Ying Yang
JQJIANMIN QIU
JIANMIN QIU
JZJiyang Zhang
Jiyang Zhang
PVPiotr Vasiljev
Piotr Vasiljev
JLJikui Liu
Jikui Liu
Traveling wave rotary ultrasonic motors (TRUSMs) have been applied in optical systems, robotics, biomedical and other fields. However, the disadvantages such as short working life, driving performance degradation, and low energy utilization significantly limit the long-term and stable operation of TRUSMs in advanced fields like aerospace mechanisms. To address the above issues, a novel rotary ultrasonic motor based on multiple Langevin transducers is proposed in this paper. First, the structural design, driving principle and general design criteria are described in detail. Then, the structural parameters are optimized by finite element simulation analysis. Second, a prototype is assembled controllably. Subsequently, the impedance test and vibration measurement are carried out. The results show that the traveling wave is successfully generated on the tooth-ring, and all the Langevin transducers are excited to the first-order longitudinal vibration modes, which strongly verify the correctness of design principle. Finally, the driving performance experiment is carried out. The experimental results show that the no-load speed is 62 r min−1 under the pre-pressure of 10 N. The stalling torque is 0.94 N m at the driving voltage of 500 Vp-p. The response characteristics show that the start/stop time are 4.6/5.5 ms, and the angular displacement resolution of clockwise/counterclockwise driving are 6.7/10.2 μrad. The motor proposed in this paper not only exhibits relatively high output performance with excellent vibration characteristics, but also maintains compactness of the structure. The sandwiched structure design effectively avoids the problem that the bonded-type piezoceramic rings in conventional TRUSMs are prone to damage or fall-off when vibrating for a long time. Furthermore, the general design criteria provide a new approach to develop high performance rotary ultrasonic motors. The proposed novel ultrasonic motor is expected to meet the demand for long-term and stable operation in aerospace mechanisms.

8 March 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
JQJIANMIN QIU
JIANMIN QIU
Ying YangYing Yang
Ying Yang
XHXin Hong
Xin Hong
Piotr VasiljevPiotr Vasiljev
Piotr Vasiljev
Dalius MazeikaDalius Mazeika
Dalius Mazeika
SBSergejus Borodinas
Sergejus Borodinas
This paper presents a disc-type ultrasonic piezoelectric motor, which is designed for micro flying vehicles. It provides a high output rotation speed under low operating voltage, compared with common piezoelectric devices, by employing a “contact teeth” wave transmission structure. The ultrasonic motor (USM) consists of a trimorph disc stator, with triple internal contact teeth, a shaft and two hemispheric hard-wearing rotors. The operating principle of the USM is based on the superposition of the in-plane B03 vibration mode of the trimorph disc, and the first longitudinal vibration of the contact teeth. An optimization method of the stator structure parameters was proposed and validated by numerical modeling. The diameter and thickness of the stator are 20 mm and 1 mm, respectively. A prototype with the weight of 2 g was made for this experimental test. The optimal frequency of the excitation signal and the preload force are 98.5 kHz and 0.5 N, respectively. The minimum operating voltage was tested under 7.5 V and reached the speed of 225 rpm, and the maximum unloaded rotational speed of the USM reached 5172 rpm when 30 V driving voltage was applied. The maximum lifting force generated by this USM was measured as 46.1 mN, which is 2.35 times bigger than its weight.

22 November 2023 in Smart Materials and Structures
Verified
Journal Article
Closed access
ZPZhiyong Pan
Zhiyong Pan
Liang WangLiang Wang
Liang Wang
JJJiamei Jin
Jiamei Jin
JQJIANMIN QIU
JIANMIN QIU
HFHaoren Feng
Haoren Feng
YYYing Yang
Ying Yang
Three-degree-of-freedom (3-DOF) rotary piezoelectric motors often suffer from low positioning accuracy, complex excitation signals, and uneven preloading, limiting their application in precision drive systems. To address these issues, this study proposes a novel multi-drive pattern 3-DOF rotary piezoelectric motor, comprising a sandwich-type hollow cylindrical stator, a spherical rotor, and a pre-tightening structure. The proposed motor can operate in both inertial and traveling wave drive patterns. In the inertial drive pattern, the first-order and the third-order bending vibration modes of the stator are simultaneously excited by a sawtooth wave signal, generating a saw-tooth displacement on its driving feet to rotate the rotor around the x or y-axis. In the traveling wave drive pattern, two mutually orthogonal first-order bending vibration modes of the stator are simultaneously stimulated by two sinusoidal signals, generating a traveling wave on its driving feet to rotate the rotor around the z-axis. Initially, finite element analysis is used to simulate the operating principle of the stator and determine its geometric dimensions. Subsequently, a prototype of the sandwich-type hollow cylindrical stator is fabricated, and its vibration characteristics are tested to confirm the validation of the proposed operating principle and the correctness of the finite element simulation. Finally, a prototype of the proposed 3-DOF rotary piezoelectric motor is assembled, and its mechanical output characteristics are experimentally evaluated. Experimental results indicate that when the excitation voltage is 200 Vpp, the no-load rotary velocities of the motor prototype in three rotation directions are 79 r min−1, 76 r min−1, and 101 r min−1, respectively, start/stop response times are 10 ms/8.6 ms, 13.4 ms/6.2 ms, and 15.5 ms/7.7 ms, respectively, and the angular displacement resolutions are 7.4 μrad, 8 μrad, and 11.4 μrad, respectively. The proposed motor exhibits high mechanical integration, 3-DOF rotation, few excitation signals, adjustable pre-tightening force, and high positioning accuracy advantages, holding the potential applications in fields such as robotic technology and space pointing mechanisms.

13 July 2023 in Smart Materials and Structures
Verified
Journal Article
Closed access
JQJIANMIN QIU
JIANMIN QIU
Ying YangYing Yang
Ying Yang
JJJiamei Jin
Jiamei Jin
LWLiang Wang
Liang Wang
YWYiping Wang
Yiping Wang
JZJiyang Zhang
Jiyang Zhang
Macro-micro actuators require complex feedback control systems to obtain high positioning cooperativeness. However, the mechanical connections of macro-micro actuators are generally redundant in terms of their size, which is highly unfavorable for both miniaturization and integration. This paper presents an approach to address this problem based on a novel integration design for a three-phase excitation piezoelectric motor (TPM) that is capable of performing macro-micro actuation by switching its operating mode from resonant to nonresonant. The load capacity of the proposed TPM can reach 0.39 Nm with a maximum speed of 3.82 rad s−1 (36.5 rpm). This performance is achieved by using a unique triangular flexible stator that contains three piezoelectric stack actuators acting as vibrators and is excited by a three-phase electrical signal. A time-domain electromechanical coupling dynamic model is developed to determine the dynamic behavior of the proposed motor, and the modeling results are validated successfully by experimental results obtained from a fabricated prototype. The proposed motor is expected to be helpful for integration design of piezoelectric devices that require macro-micro actuation.