Background and aims: Wastewater‐based epidemiology is an additional indicator of drug use that is gaining reliability to complement the current established panel of indicators. The aims of this study were to: (i) assess spatial and temporal trends of population‐normalized mass loads of benzoylecgonine, amphetamine, methamphetamine and 3,4‐methylenedioxymethamphetamine (MDMA) in raw wastewater over 7 years (2011–17); (ii) address overall drug use by estimating the average number of combined doses consumed per day in each city; and (iii) compare these with existing prevalence and seizure data.Design: Analysis of daily raw wastewater composite samples collected over 1 week per year from 2011 to 2017.Setting and Participants: Catchment areas of 143 wastewater treatment plants in 120 cities in 37 countries.Measurements: Parent substances (amphetamine, methamphetamine and MDMA) and the metabolites of cocaine (benzoylecgonine) and of Δ⁹‐tetrahydrocannabinol (11‐nor‐9‐carboxy‐Δ⁹‐tetrahydrocannabinol) were measured in wastewater using liquid chromatography–tandem mass spectrometry. Daily mass loads (mg/day) were normalized to catchment population (mg/1000 people/day) and converted to the number of combined doses consumed per day. Spatial differences were assessed world‐wide, and temporal trends were discerned at European level by comparing 2011–13 drug loads versus 2014–17 loads.Findings: Benzoylecgonine was the stimulant metabolite detected at higher loads in southern and western Europe, and amphetamine, MDMA and methamphetamine in East and North–Central Europe. In other continents, methamphetamine showed the highest levels in the United States and Australia and benzoylecgonine in South America. During the reporting period, benzoylecgonine loads increased in general across Europe, amphetamine and methamphetamine levels fluctuated and MDMA underwent an intermittent upsurge.Conclusions: The analysis of wastewater to quantify drug loads provides near real‐time drug use estimates that globally correspond to prevalence and seizure data.

In recent years, the scientific community has turned its attention to the further study and application of green chemistry as well as to sustainable development in reducing the consumption of raw materials, solvents, and energy. The application of green chemistry aims to ensure the protection of the environment and to also, consequently, improve the quality of human life. It offers several benefits, both socially and economically. In the last few decades, new alternative non-conventional green extraction methodologies have been developed for the purposes of the extraction of active ingredient compounds from various raw products. The main objective of this literature review is to present the current knowledge and future perspectives regarding the green extraction of tea species in respect of the isolation of safe active biomolecules, which can be used as commercially available products—both as dietary supplements and pharmaceutical formulations. More specifically, in this literature review, the intention is to investigate several different extraction techniques, such as ultrasonic-assisted extraction, ultrasonic-assisted extraction with DESs, the microwave assisted-extraction method, and the reflux method. These are presented in respect of their role in the isolation of bioactive molecules regarding different tea species. Furthermore, following the literature review conducted in this study, the commonly used green extraction methods were found to be the ultrasound-assisted method and the microwave-assisted method. In addition to these, the use of a green solvent, in regard to its role in the maximum extraction yield of active ingredients in various species of tea, was emphasized. Catechins, alkaloids (such as caffeine), gallic acid, and flavonoids were the main extracted bioactive molecules that were isolated from the several tea species. From this literature review, it can be demonstrated that green tea has been widely studied at a rate of 52% in respect of the included research studies, followed by black tea at 26%, as well as white tea and oolong tea at 11% each. Regarding the determination of the bioactive molecules, the most utilized analytical method was found in the combination of high-performance liquid chromatography (HPLC) with a photodiode array detector (PDA) and mass spectrophotometry (MS) at a usage rate of about 80%. This method was followed by the utilization of UPLC and GC at 12% and 8%, respectively. In the future, it will be necessary to study the combination of green extraction techniques with other industry strategies, such as an encapsulation at the micro and nano scale, for the purposes of preparing stable final products with antioxidant properties where, finally, they can be safely consumed by humans.

Quorum sensing (QS) is a form of intra- and inter-species communication system employed by bacteria to regulate their collective behavior in a cell population-dependent manner. QS has been implicated in the virulence of several pathogenic bacteria. This work aimed to investigate the anti-QS potential of ethanolic extracts of eight aromatic plants of Cyprus, namely, Origanum vulgare subsp. hirtum, Rosmarinus officinalis, Salvia officinalis, Lavendula spp., Calendula officinalis, Melissa officinalis, Sideritis cypria, and Aloysia citriodora. We initially assessed the effects of the extracts on autoinducer 2 (AI-2) signaling activity, using Vibrio harveyi BB170 as a reported strain. We subsequently assessed the effect of the ethanolic extracts on QS-related processes, including biofilm formation and the swarming and swimming motilities of Escherichia coli MG1655. Of the tested ethanolic extracts, those of Origanum vulgare subsp. hirtum, Rosmarinus officinalis, and Salvia officinalis were the most potent AI-2 signaling inhibitors, while the extracts from the other plants exhibited low to moderate inhibitory activity. These three ethanolic extracts also inhibited the biofilm formation (>60%) of E. coli MG1655, as well as its swimming and swarming motilities, in a concentration-dependent manner. These extracts may be considered true anti-QS inhibitors because they disrupt QS-related activities of E. coli MG1655 without affecting bacterial growth. The results suggest that plants from the unexplored flora of Cyprus could serve as a source for identifying novel anti-QS inhibitors to treat infectious diseases caused by pathogens that are resistant to antibiotics.

Mono-doped (Mo-TiO₂ and W-TiO₂) and co-doped TiO₂ (Co-Mo-TiO₂, Co-W-TiO₂, Cu-Mo-TiO₂, Cu-W-TiO₂, Zn-Mo-TiO₂, and Zn-W-TiO₂) catalysts were synthesized by simple impregnation methods and tested for the photocatalytic degradation of 4-tert-butylphenol in water under UV (365 nm) light irradiation. The catalysts were characterized with various analytical methods. X-ray diffraction (XRD), Raman, Diffuse reflectance (DR) spectroscopies, Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), and Energy dispersive spectroscopy (EDS) were applied to investigate the structure, optical properties, morphology, and elemental composition of the prepared catalysts. The XRD patterns revealed the presence of peaks corresponding to the WO₃ in W-TiO₂, Co-W-TiO₂, Cu-W-TiO₂, and Zn-W-TiO₂. The co-doping of Cu and Mo to the TiO₂ lattice was evidenced by the shift of XRD planes towards higher 2θ values, confirming the lattice distortion. Elemental mapping images confirmed the successful impregnation and uniform distribution of metal particles on the TiO₂ surface. Compared to undoped TiO₂, Mo-TiO₂ and W-TiO₂ exhibited a lower energy gap. Further incorporation of Mo-TiO₂ with Co or Cu introduced slight changes in energy gap and light absorption characteristics, particularly visible light absorption. In addition, photoluminescence (PL) showed that Cu-Mo-TiO₂ has a weaker PL intensity than undoped TiO₂. Thus, Cu-Mo-TiO₂ showed better catalytic activity than pure TiO₂, achieving complete degradation of 4-tert-butylphenol under UV light irradiation after 60 min. The application of Cu-Mo-TiO₂ under solar light conditions was also tested, and 70% of 4-tert-butylphenol degradation was achieved within 150 min.

Biochar from spent malt rootlets was employed as the template to synthesize hybrid biochar-ceria materials through a wet impregnation method. The materials were tested for the activation of persulfate (SPS) and subsequent degradation of sulfamethoxazole (SMX), a representative antibiotic, in various matrices. Different calcination temperatures in the range 300–500 °C were employed and the resulting materials were characterized by means of N₂ adsorption and potentiometric mass titration as well as TGA, XRD, SEM, FTIR, DRS, and Raman spectroscopy. Calcination temperature affects the biochar content and the physicochemical properties of the hybrid materials, which were tested for the degradation of 500 μg L⁻¹ SMX with SPS (in the range 200–500 mg L⁻¹) in various matrices including ultrapure water (UPW), bottled water, wastewater, and UPW spiked with bicarbonate, chloride, or humic acid. Materials calcined at 300–350 °C, with a surface area of ca. 120 m² g⁻¹, were the most active, yielding ca. 65% SMX degradation after 120 min of reaction in UPW; materials calcined at higher temperatures as well as bare biochar were less active. Degradation decreased with increasing matrix complexity due to the interactions amongst the surface, the contaminant, and the oxidant. Experiments in the presence of scavengers (i.e., methanol, t-butanol, and sodium azide) revealed that sulfate and hydroxyl radicals as well as singlet oxygen were the main oxidative species.

Research on animal venoms and their components spans multiple disciplines, including biology, biochemistry, bioinformatics, pharmacology, medicine, and more. Manipulating and analyzing the diverse array of data required for venom research can be challenging, and relevant tools and resources are often dispersed across different online platforms, making them less accessible to nonexperts. In this article, we address the multifaceted needs of the scientific community involved in venom and toxin-related research by identifying and discussing web resources, databases, and tools commonly used in this field. We have compiled these resources into a comprehensive table available on the VenomZone website (https://venomzone.expasy.org/10897). Furthermore, we highlight the challenges currently faced by researchers in accessing and using these resources and emphasize the importance of community-driven interdisciplinary approaches. We conclude by underscoring the significance of enhancing standards, promoting interoperability, and encouraging data and method sharing within the venom research community.