Terrestrial laser scanning is a promising technique for automatic measurements of tree stems. The objectives of the study were (1) to develop and validate a new method for the detection, classification and measurements of tree stems and canopies using the Hough transformation and the RANSAC algorithm and (2) assess the influence of distance to the scanner on the measurement accuracy. Tree detection and stem diameter estimates were validated for 16 circular plots with 20 m radius. The three dominating tree species were Norway spruce (Picea abies L. Karst.), Scots pine (Pinus sylvestris L.) and birch (Betula spp.). The proportion of detected trees decreased as the distance to the scanner increased and followed the trend of decreasing visible area. Within 10 m from the scanner, the proportion of detected trees was 87% on average for the plots and the diameter at breast height was estimated with a relative root-mean-square-error (RMSE) of 14%. The most accurate diameter measurements were obtained for pine, which had a RMSE of 7% for all the full 20 m radius plots. The RANSAC algorithm reduced noise and made it possible to obtain reliable estimates.

The Nordic countries have long traditions in forest inventory and remote sensing (RS). In sample-based national forest inventories (NFIs), utilization of aerial photographs started during the 1960s, satellite images during the 1980s, laser scanning during the 2000s, and photogrammetric point clouds during the 2010s. In forest management inventories (FMI), utilization of aerial photos started during the 1940s and laser scanning during the 2000s. However, so far, RS has mostly been used for map production and research rather than for estimation of regional parameters or inference on their accuracy. In recent years, the RS technology has been developing very fast. At the same time, the needs for information are constantly increasing. New technologies have created possibilities for cost-efficient production of accurate, large area forest data sets, which also will change the way forest inventories are done in the future. In this study, we analyse the state-of-the-art both in the NFIs and FMIs in the Nordic countries. We identify the benefits and drawbacks of different RS materials and data acquisition approaches with different user perspectives. Based on the analysis, we identify the needs for further development and emerging research questions. We also discuss alternatives for ownership of the data and cost-sharing between different actors in the field.

Multispectral Airborne Laser Scanning (ALS) is a new technology and its output data have not been fully explored for tree species classification purposes. The objective of this study was to investigate what type of features from multispectral ALS data (wavelengths of 1550 nm, 1064 nm and 532 nm) are best suited for tree species classification. Remote sensing data were gathered over hemi-boreal forest in southern Sweden (58°27′18.35″N, 13°39′8.03″E) on 21 July 2016. The field data consisted of 179 solitary trees from nine genera and ten species. Two new methods for feature extraction were tested and compared to features of height and intensity distributions. The features that were most important for tree species classification were intensity distribution features. Features from the upper part of the upper and outer parts of the crown were better for classification purposes than others. The best classification model was created using distribution features of both intensity and height in multispectral data, with a leave-one-out cross-validated accuracy of 76.5%. As a comparison, only structural features resulted in an highest accuracy of 43.0%. Picea abies and Pinus sylvestris had high user’s and producer’s accuracies and were not confused with any deciduous species. Tilia cordata was the deciduous species with a large sample that was most frequently confused with many other deciduous species. The results, although based on a small and special data set, suggest that multispectral ALS is a technology with great potential for tree species classification.

This paper report experiences from the processing and mosaicking of 518 TanDEM-X image pairs covering the entirety of Sweden, with two single map products of above-ground biomass (AGB) and forest stem volume (VOL), both with 10 m resolution. The main objective was to explore the possibilities and overcome the challenges related to forest mapping extending a large number of adjacent satellite scenes. Hence, numerous examples are presented to illustrate challenges and possible solutions. To derive the forest maps, the observables backscatter, interferometric phase height and interferometric coherence, obtained from TanDEM-X, were evaluated using empirical robust linear regression models with reference data extracted from 2288 national forest inventory plots with a 10 m radius. The interferometric phase height was the single most important observable, to predict AGB and VOL. The mosaics were evaluated on different datasets with field-inventoried stands across Sweden. The root mean square error (RMSE) was about 21%–25% (27–30 tons/ha and 52–65 m³/ha) at the stand level. It was noted that the most influencing factors on the observables in this study were local temperature and geolocation errors that were challenging to robustly compensate against. Because of this variability at the scene-level, determinations of AGB and VOL for single stands are recommended to be used with care, as an equivalent accuracy is difficult to achieve for all different scenes, with varying acquisition conditions. Still, for the evaluated stands, the mosaics were of sufficient accuracy to be used for forest management at the stand level.