A two-level model (TLM) is introduced and investigated for the estimation of forest height and canopy density from a single ground-corrected InSAR complex correlation coefficient. The TLM models forest as two scattering levels, namely, ground and vegetation, separated by a distance Δh and with area-weighted backscatter ratio μ. The model is evaluated using eight VV-polarized bistatic-interferometric TanDEM-X image pairs acquired in the summers of 2011, 2012, and 2013 over the managed hemi-boreal test site Remningstorp, which is situated in southern Sweden. Ground phase is removed using a highresolution digital terrain model. Inverted TLM parameters for thirty-two 0.5-ha plots of four different types (regular plots, sparse plots, seed trees, and clear-cuts) are studied against reference lidar data. It is concluded that the level distance Δh can be used as an estimate of the 50th percentile forest height estimated from lidar (for regular plots: r > 0.95 and root-mean-square difference (σ) <; 10%, or 1.8 m). Moreover, the uncorrected area fill factor n0 = 1/(1 + μ) can be used as an estimate of the vegetation ratio, which is a canopy density estimate defined as the fraction of lidar returns coming from the canopy to all lidar returns (for regular plots: r > 0.59 and σ ≈ 10%, or 0.07).

This paper report experiences from the processing and mosaicking of 518 TanDEM-X image pairs covering the entirety of Sweden, with two single map products of above-ground biomass (AGB) and forest stem volume (VOL), both with 10 m resolution. The main objective was to explore the possibilities and overcome the challenges related to forest mapping extending a large number of adjacent satellite scenes. Hence, numerous examples are presented to illustrate challenges and possible solutions. To derive the forest maps, the observables backscatter, interferometric phase height and interferometric coherence, obtained from TanDEM-X, were evaluated using empirical robust linear regression models with reference data extracted from 2288 national forest inventory plots with a 10 m radius. The interferometric phase height was the single most important observable, to predict AGB and VOL. The mosaics were evaluated on different datasets with field-inventoried stands across Sweden. The root mean square error (RMSE) was about 21%–25% (27–30 tons/ha and 52–65 m³/ha) at the stand level. It was noted that the most influencing factors on the observables in this study were local temperature and geolocation errors that were challenging to robustly compensate against. Because of this variability at the scene-level, determinations of AGB and VOL for single stands are recommended to be used with care, as an equivalent accuracy is difficult to achieve for all different scenes, with varying acquisition conditions. Still, for the evaluated stands, the mosaics were of sufficient accuracy to be used for forest management at the stand level.

The multitemporal acquisition of images from the Sentinel-1 satellites allows continuous monitoring of a forest. This study focuses on the use of multitemporal C-band synthetic aperture radar (SAR) data to assess the results for forest type (FTY), between coniferous and deciduous forest, and tree species (SPP) classification. We also investigated the temporal stability through the use of backscatter from multiple seasons and years of acquisition. SAR acquisitions were pre-processed, histogram-matched, smoothed, and temperature-corrected. The normalized average backscatter was extracted for interpreted plots and used to train Random Forest models. The classification results were then validated with field plots. A principal component analysis was tested to reduce the dimensionality of the explanatory variables, which generally improved the results. Overall, the FTY classifications were promising, with higher accuracies (OA of 0.94 and K = 0.86) than the SPP classification (OA of 0.66 and K = 0.54). The use of merely winter images (OA = 0.89) reached, on average, results that were almost as good as those using of images from the entire year. The use of images from a single winter season reached a similar result (OA = 0.87). We conclude that multiple Sentinel-1 images acquired in winter conditions are feasible to classify forest types in a hemi-boreal Swedish forest.