As food and beverages require more and more green and safe packaging products, the emergence of polymer coated steel (PCS) has been promoted. PCS is a layered composite strip made of metal and polymer. To probe the bonding mechanism of PCS micro-interface, the substrate tin-free steel (TFS) was physically characterized by SEM and XPS, and cladding polyethylene terephthalate (PET) was simulated by first-principles methods of quantum mechanics (QM). We used COMPASS force field for molecular dynamics (MD) simulation. XPS pointed out that the element composition of TFS surface coating is Cr(OH)3, Cr2O3 and CrO3. The calculation results of MD and QM indicate that the chromium oxide and PET molecules compound in the form of acid-base interaction. The binding energies of Cr2O3 (110), (200), and (211) with PET molecules are −13.07 eV, −2.74 eV, and −2.37 eV, respectively. We established a Cr2O3 (200) model with different hydroxyl concentrations. It is proposed that the oxygen atom in C=O in the PET molecule combines with –OH on the surface of TFS to form a hydrogen bond. The binding energy of the PCS interface increases with the increase of the surface hydroxyl concentration of the TFS. It provides theoretical guidance and reference significance for the research on the bonding mechanism of PCS.
4 May 2015 in Chinese Journal of Mechanical Engineering
How to control surface roughness of steel strip in a narrow range for a long time has become an important question because surface roughness would significantly influence the appearance of the products. However, there are few effective solutions to solve the problem currently. In this paper, considering both asperities of work roll pressing in and squeezing the steel strip, two asperity contact models including squeezing model and pressing in model in a two-stand temper mill rolling are established by using finite element method (FEM). The simulation investigates the influences of multiple process parameters, such as work roll surface roughness, roll radius and roll force on the surface roughness of steel strip. The simulation results indicate that work rolls surface roughness and roll force play important roles in the products; furthermore, the effect of roll force in the first stand is opposite to the second. According to the analysis, a control method for steel strip surface roughness in a narrow range for a long time is proposed, which applies higher work roll roughness in the first stand and lower roll roughness in the second to make the steel strip roughness in a required narrow range. In the later stage of the production, decreasing the roll force in the first stand and increasing the roll force in the second stand guarantee the steel strip roughness relatively stable in a long time. The following experimental measurements on the surface topography and roughness of the steel strips during the whole process are also conducted. The results validate the simulation conclusions and prove the effect of the control method. The application of the proposed method in the steel strip production shows excellent performance including long service life of work roll and high finished product rate.
3 September 2024 in Journal of Materials Research and Technology
The interfacial bonding process and mechanical properties of AISI (American Iron and Steel Institute) stainless steel/Q235A carbon steel were investigated by deformation bonding, heat preservation, and tensile tests. The results reveal that the deformation temperature has a beneficial effect on the bonding rate, and that the critical temperature for the large-area bonding of stainless steel and carbon steel is approximately 700 °C. However, owing to the short contact time, only a shallow diffusion of approximately 2–3 µm can be achieved. A slight decrease in the interfacial bonding rate after heat preservation is correlated to the difference between the thermal expansion coefficients of the two materials, but the thickness of the diffusion layer shows a significant increase. It was found that the strength of the composites is mostly related to the bonding rate and the strength of the relatively soft material, which can be determined using an explicit equation. Moreover, with the increase in the interfacial bonding rate, the crack source changes from the junction of the unbonded and bonded areas of the interface to the interior of the carbon steel. The failure mode evolves from cleavage brittle fracture to ductile–brittle mixed-mode fracture, and then to ductile fracture.
For the deficiencies of traditional stress detection methods for steel strips in industrial production, this paper proposes a non-contact stress detection scheme based on the magnetoelastic effect. The theoretical model of the transmission-type stress detection is established, in which the output voltage and the tested stress obey a linear relation. Then, a stress detection device is built for the experiment, and Q235 steel under uniaxial tension is tested as an example. The result shows that the output voltage rises linearly with the increase of the tensile stress, consistent with the theoretical prediction. To ensure the accuracy of the stress detection method in actual application, the temperature compensation, magnetic shielding and some other key technologies are investigated to reduce the interference of the external factors, such as environment temperature and surrounding magnetic field. The present research develops the theoretical and experimental foundations for the magnetic stress detection system, which can be used for online non-contact monitoring of strip flatness-related stress (tension distribution or longitudinal residual stress) in the steel strip rolling process, the quality evaluation of strip flatness after rolling, the life and safety assessment of metal construction and other industrial production links.