Because micro-line segments are the most widely used form of tool-paths for computer numerical control machining, the smoothness at the junction of two adjacent segments is still the bottleneck for the machining quality and efficiency. To reduce the time spent by the smoothing process and improve the smoothness at the junction, this article proposes a real-time and look-ahead interpolation algorithm with an axial jerk-smooth transition scheme. In one step, the algorithm finishes the transition scheme construction and velocity planning by using the trigonometric velocity planning method. This method can utilize the maximal acceleration and/or jerk capabilities of drive axis to achieve smooth axial kinematic profiles while satisfying the user-specified chord error. In addition, a real-time look-ahead method is developed to plan the global feedrate profile and adjust the transition schemes without intersections constantly. The simulation results demonstrate that the proposed algorithm could realize smooth axial velocity, acceleration and jerk control and improve the smoothing process efficiency and machining accuracy.
14 August 2021 in Advances in Mechanical Engineering
In micro-line segments machining, transition curves with high harmonic components are more prone to causing vibration issues in the feed drive system, which affects machining efficiency and quality severely. To construct low harmonic trajectories, this paper proposes a corner smoothing algorithm that uses the Trajectory Pattern Method (TPM). The transition curve construction and axial motion scheduling are performed with a specified fundamental frequency in one step, which reduces the smoothing process time and avoids excitation of natural modes of vibration of the system. The synthesized trajectories and axial kinematic profiles are all smooth and only contain the selected fundamental frequency and its first two odd harmonics, which minimizes the number of high harmonic components in the required actuation forces/torques and avoids excitation of the system modes of vibration. Linear programming is used to synthesize the trajectories. The proposed algorithm is shown to achieve near time-optimal trajectories. The provided experimental analysis and comparisons demonstrate that the proposed algorithm achieves smooth axial kinematic profiles with low harmonic contents, which would improve machining efficiency and quality.
10 June 2022 in Archives of Metallurgy and Materials
Through taking the cold rolling process as the research object, the three-dimensional finite element model of the strip rolling process is established by using ANSYS/LS-DYNA software. The actual rolling product data has strong consistency with the finite element simulation results. The rolling process is dynamically simulated, and the distribution curves of important rolling parameters such as equivalent stress, control efficiency coefficient, transverse rolling pressure, lateral thickness and work roll deflection is obtained. Based on summarizing the influence of rolling parameters on rolling deformation, the research results of this paper can play an important role in the actual rolling process control. The research results have certain guiding significance for the development and optimization of the rolling control system.
21 November 2024 in Metrology and Measurement Systems
This paper aims to analyse the reason for the relatively large length difference of the diagonal of Vickers indentation on the tested material with mechanical anisotropy and propose a feasible method to reduce it. The Vickers hardness test results of the tested material with mechanical anisotropy have shown that the length difference of the diagonal of Vickers indentation on the tested material with mechanical anisotropy would be more than 5% very likely, which is against the test requirement of the related test standard and would affect the test accuracy and effectiveness of the Vickers hardness test. The finite element simulation results of the Vickers hardness test of the tested material with mechanical anisotropy have also shown that the anisotropy of mechanical properties of tested material would affect the length recovery of the diagonal of Vickers indentation on the surface of tested material, thereby affecting the difference of the diagonal length of Vickers indentation. This paper has proposed a method to decrease of diagonal length difference of Vickers indentation through rotating the indenter or the tested material properly and conducting a multiple Vickers hardness test, thereby improving the accuracy and effectiveness of the Vickers hardness test according to the related test standards.
In high-speed and high-precision machinery, trajectories with high-frequency harmonic content are one of the main sources of reduction of operational precision. Trajectories with high-frequency harmonic content generally demand even higher-harmonic actuating forces/torques due to the nonlinear dynamics of such systems, which may excite natural modes of vibration of the system and/or be beyond the dynamic response limitation of the actuation devices. In this paper, a global interpolation algorithm that uses the trajectory pattern method (TPM) for synthesizing low-harmonic trajectories is presented. The trajectory synthesis with the TPM is performed with a prescribed fundamental frequency and continuous jounce boundary condition, which would minimize the number of high-harmonic components in the required actuation forces/torques and avoid excitation of the system modes of vibration. The minimal curvature variation energy method, Lagrange multiplier method, and contour error control are used to obtain smooth kinematic profiles and satisfy the trajectory accuracy requirements. As an example, trajectory patterns that consist of a fundamental frequency sinusoidal time function and its first three harmonics are used to synthesize the desired trajectories for a selected dynamic system. The synthesized trajectories are shown to cause minimal system vibration during its operation. A comparison with a commonly used trajectory synthesis method clearly shows the superiority of the developed TPM-based approach in reducing vibration and demand on the actuator dynamic response, thereby allowing the system to operate at higher speeds and precision.