The polymer inclusion membranes (PIMs) containing Cellulose triacetate as polymer base, 2-NPOE as a plasticizer, and Calix[4]resorcinarene (RC8) as a carrier were prepared and characterized. Microstructure and surface of PIMs were characterized by scanning electron microscope, FTIR, UV/vis spectroscopy, and Thermogravimetric Analysis, respectively. In order to obtain information on the composition and interactions that may manifest between the constituents of the membrane. The PIMs were applied in the elimination of Methylene Blue (MB) dye from model solution as synthetic aqueous wastewater. Furthermore, the effects of different parameters such as internal and external PIMs environment on the transport performance of MB were also investigated. The results confirming that the content of the carrier and plasticizer in the membrane had a significant impact on the property of PIMs. The transport of dye was in line with the first-order kinetics equation. The highest flux value "8.88 × 10^–7 mol.m⁻² s⁻¹" was obtained with a calix [4] resorcinarene as a transporter in polymer inclusion membrane at pH 11 in the feed and 0.3 M HCl in the stripping phase when MB initial concentration was 100 mg/L. The membrane has better stability under optimum conditions and maximum transport was observed after 30 h of permeation time.

This study investigates heavy metal contamination in soils, irrigation water, and agricultural produce (fruits: Vitis vinifera (grape), Cucumis melo var. saccharimus (melon), and Citrullus vulgaris. Schrade (watermelon); vegetables: Lycopersicum esculentum L. (tomato), Cucurbita pepo (zucchini), Daucus carota (carrot), Lactuca sativa (lettuce), Convolvulus Batatas (potato), and Capsicum annuum L. (green pepper)) in the Boumerdes region of Algeria. The concentrations of seven heavy metals (cadmium (Cd), chromium (Cr), copper (Cu), iron (Fe), nickel (Ni), lead (Pb), and zinc (Zn)) in soil and food samples were analyzed using atomic absorption spectrometry. Health risks associated with these metals were evaluated through the estimated daily intake (EDI), non-carcinogenic risks (using target hazard quotient (THQ), total target hazard quotient (TTHQ), and hazard index (HI)), and carcinogenic risks (cancer risk factor (CR)). Statistical analyses, including cluster analysis (CA) and Pearson correlation, were conducted to interpret the data. The results revealed the highest metal transfer as follows: Cd was most significantly transferred to tomatoes and watermelons; Cr to carrots; Cu to tomatoes; and Fe, Ni, Pb, and Zn to lettuce. Among fruits, the highest EDI values were for Zn (2.54·10⁻³ mg/day) and Cu (1.17·10⁻³ mg/day), with melons showing the highest Zn levels. For vegetables, the highest EDI values were for Fe (1.68·10⁻² mg/day) and Zn (8.37·10⁻³ mg/day), with potatoes showing the highest Fe levels. Although all heavy metal concentrations were within the World Health Organization’s permissible limits, the HI and TTHQ values indicated potential health risks, particularly from vegetable consumption. These findings suggest the need for ongoing monitoring to ensure food safety and mitigate health risks associated with heavy metal contamination.

Nowadays, there are increasingly stringent regulations requiring more and more treatment of industrial effluents to generate product waters which could be easily reused or disposed of to the environment without any harmful effects. In the present work, the removal of phenol from aqueous solution across polymer inclusion membrane (PIM), based on mixture of cellulose triacetate and cellulose acetate as support (75/25%), calix[4]resorcinarene derivative as a carrier and 2-nitrophenyl octyl ether (2-NPOE) as plasticizer was investigated. The experimental part of this investigation involved the influence of carrier nature, plasticizer concentration, pH phases, and phenol initial concentration on the removal efficiency of phenol from synthetic wastewater. A PIM containing 0.1 g (of mixture polymer), (0.15 g/g mixture of polymer) of carrier and (0.03 ml/g mixture of polymer) of 2-NPOE provided the highest percentage of phenol removal efficiency over a 6-day transport; the removal was found to be about 95%, indeed the removal was found to be highly dependent of pH phases. The feed solution in these transport experiments was at pH 2, while the stripping solution contained 0.20 M NaOH. This study claims that the PIM with a mixture of cellulose derivatives can be used effectively to remove phenols from wastewaters.