Ehsan Farokhipour

Mr. Ehsan Farokhipour

University of Technology Sydney

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
EFEhsan Farokhipour
Ehsan Farokhipour
BSBenedikt Sievert
Benedikt Sievert
JSJan Taro Svejda
Jan Taro Svejda
ARAndreas Rennings
Andreas Rennings
NKNader Komjani
Nader Komjani
DEDaniel Erni
Daniel Erni
This letter presents a single-layer, wide-angle, and low-cost frequency beam scanning leaky-wave antenna (LWA) based on spoof surface plasmon polaritons (SSPPs). Here, two rows of Sierpinski pre-fractal parasitic patches are placed near an ultrathin planar SSPP waveguide, which can achieve continuous backfire to nearly endfire beam scanning with increasing frequency. The overall width of the proposed antenna is only 0.75$\lambda _{\text{0}}$ (with $\lambda _{\text{0}}$ being the wavelength of the lowest operating frequency). This SSPP LWA provides high-performance backfire and broadside radiations due to applying pre-fractal units. Simulated results show that the proposed SSPP LWA achieves a wide scanning range from -90$^{\circ }$ to +58$^{\circ }$ within the frequency range of 3 to 8 GHz. The average gain and radiation efficiency of the antenna are 10.9 dBi and 88%, respectively. An antenna prototype is fabricated and measured. The measured results agree reasonably well with the simulated ones.

21 December 2018 in Journal of Applied Physics
Verified
Journal Article
Closed access
PDF file
EFEhsan Farokhipour
Ehsan Farokhipour
NKNader Komjani
Nader Komjani
MCMohammad Amin Chaychizadeh
Mohammad Amin Chaychizadeh
In this paper, an ultra-wideband spoof surface plasmon polaritons’ (SSPPs) power divider with simplest odds ratio (1:3) composed of hexagonal ring unit cells is proposed. The creation of electromagnetic waves with high confinement in a collision between periodically decorated metal and dielectric is a fundamental property of SSPPs. Flexibility, low loss, decreasing cross coupling, and ability for integration are other advantages of SSPP transmission lines. In order to realize the proposed 3-way power divider, first, a novel low loss and compact subwavelength hexagonal unit cell is presented. Next, a plasmonic waveguide is designed. To decrease the dielectric losses, the effect of different substrates on transmission coefficient is investigated too. In the best condition, we have a transmission line with an excellent operation in the frequency range of 3 to 11.8 GHz with a fractional bandwidth (FBW) of 119%. Then, an equal and in-phase 3-way power divider with good isolation between three output ports is designed in a wide frequency range of 2.5–8 GHz with an FBW of 105%. Finally, the proposed 3-way power divider is fabricated and tested in the laboratory. A good agreement between simulations and measurement results proves the functionality of design properly. The ultra wide-bandwidth, low loss, flexibility, and stable performance of this power divider prove its high capability compared with the state-of-the-art references. The proposed power divider can be utilized in developing an integrated plasmonic feeding network of antenna arrays in microwave and millimeter wave frequency bands.

19 December 2020 in Sensors
Verified
Journal Article
Open access
PDF file
EFEhsan Farokhipour
Ehsan Farokhipour
MMMohammad Mehrabi
Mohammad Mehrabi
NKNader Komjani
Nader Komjani
CDCan Ding
Can Ding
This paper presents a novel single-layer dual band-rejection-filter based on Spoof Surface Plasmon Polaritons (SSPPs). The filter consists of an SSPP-based transmission line, as well as six coupled circular ring resonators (CCRRs) etched among ground planes of the center corrugated strip. These resonators are excited by electric-field of the SSPP structure. The added ground on both sides of the strip yields tighter electromagnetic fields and improves the filter performance at lower frequencies. By removing flaring ground in comparison to prevalent SSPP-based constructions, the total size of the filter is significantly decreased, and mode conversion efficiency at the transition from co-planar waveguide (CPW) to the SSPP line is increased. The proposed filter possesses tunable rejection bandwidth, wide stop bands, and a variety of different parameters to adjust the forbidden bands and the filter’s cut-off frequency. To demonstrate the filter tunability, the effect of different elements like number (n), width (WR), radius (RR) of CCRRs, and their distance to the SSPP line (yR) are surveyed. Two forbidden bands, located in the X and K bands, are 8.6–11.2 GHz and 20–21.8 GHz. As the proof-of-concept, the proposed filter was fabricated, and a good agreement between the simulation and experiment results was achieved.

28 May 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
SZSajjad Zohrevand
Sajjad Zohrevand
MZMohammad Amin Chaychi Zadeh
Mohammad Amin Chaychi Zadeh
EFEhsan Farokhipour
Ehsan Farokhipour
DEDaniel Erni
Daniel Erni
NKNader Komjani
Nader Komjani
In this paper, a spoof surface plasmon polariton (SSPP) antenna with endfire radiation is inspired by the holographic technique. In contrast to the previous studies with optimization-based structures or using SSPP odd modes, we propose a simple method to design an endfire SSPP antenna based on the holographic principle that can maintain the stability of the endfire radiation over 23% of the impedance bandwidth. The proposed method includes twice modulating the structure with a 180° phase difference. This method eliminates the null in the endfire radiation pattern created by the conventional sinusoidally-modulated reactance surface (SMRS) technique. The proposed SSPP holographic antenna presents a stable endfire radiation pattern within the frequency range of 8-10 GHz. The realized gain and radiation efficiency at the design frequency of 9 GHz are 13.1 dBi and 95%, respectively. An antenna prototype is fabricated and measured in the anechoic chamber. The full wave simulation results of the CST software agree well with measured ones. This miniaturized endfire SSPP holographic antenna can be a potential candidate for wireless communication applications and integrated circuits.

7 January 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
SZSajjad Zohrevand
Sajjad Zohrevand
MZMohammad Amin Chaychi Zadeh
Mohammad Amin Chaychi Zadeh
EFEhsan Farokhipour
Ehsan Farokhipour
DEDaniel Erni
Daniel Erni
NKNader Komjani
Nader Komjani
The holographic technique is one of the simplest methods for designing antennas based on metasurface. This paper presents a spoof surface plasmon polariton (SSPP) leaky-wave antenna (LWA) based on the concept of impedance modulated metasurfaces by the anisotropic holographic technique. Instead of parasitic elements, anisotropic SSPP elements are exploited to achieve radiation with circular polarization. The characteristics of the SSPP elements are obtained by the aperture field estimate method. The hologram surface consists of hollow cross-bars unit cells. The anisotropy of each unit cell is achieved by combining the transformation optic method and the particle swarm optimization algorithm. A major challenge of the SSPP LWA based on modulated impedance surfaces is to find a suitable excitation technique. This study proposes a waveguide strip line launcher for excitation to minimize interference on the radiation pattern beam. The designed launcher provides a good impedance matching from 8 to 20 GHz, with an impedance bandwidth of 142%. The peak gain, radiation efficiency, axial ratio (AR) bandwidth, and side lobe level at the design frequency of 18 GHz are 19.7dBi, 93%, 11%, and − 12.1 dB, respectively. After optimizations and simulations are conducted using MATLAB and CST software, the proposed antenna is fabricated, and its radiation characteristics are measured. The measured results agree well with the simulated ones, indicating the high validity of the method.

31 March 2026 in IEEE Access
Verified
Journal Article
Open access
EFEhsan Farokhipour
Ehsan Farokhipour
PWPeng-Yuan Wang
Peng-Yuan Wang
BSBenedikt Sievert
Benedikt Sievert
ARAndreas Rennings
Andreas Rennings
DEDaniel Erni
Daniel Erni
This article proposes a spoof surface plasmon polariton leaky-wave antenna (SSPP LWA) with independently suppressed open-stopband (OSB) and grating lobe for operation at millimeter-wave frequencies. The main operating section of the SSPP LWA consists of corrugated metallic strips loaded by a periodic arrangement of circular patches exhibiting quasi-glide symmetry, suppressing the OSB on the broadside. The OSB suppression is analyzed by accurately extracting the dispersion characteristic of the SSPP LWA. A theoretical method is proposed to predict the directional radiation patterns of the proposed LWA. Periodic LWAs suffer from the grating lobe at higher frequencies as the main beam scans toward the forward direction. To address this issue, we propose a modification of the unit cell radiation pattern. This increases the gain in the main beam direction while reducing it in the region where the grating lobe appears at higher frequencies. This behavior is achieved by employing asymmetrical slots within the circular patches. The simulated beam scans from −30° to +46° within a gain variation of 3.8 dB by varying the frequency from 55 GHz to 95 GHz. The simulated radiation efficiency over the entire band is above 77%. The measured beam scans from +16° to +48° with a maximum realized gain of 15 dBi in the frequency range of 75 GHz to 95 GHz. The simulated results agree well with the experimental data over a wide operating frequency range. The fabricated antenna on fused silica would be attractive for millimeter-wave radar and imaging systems.