Nader Komjani

Nader Komjani


Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 June 2018 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
MPMehdi Pazokian
Mehdi Pazokian
NKNader Komjani
Nader Komjani
MKMajid Karimipour
Majid Karimipour
In this letter an optimized coding frequency selective surface (FSS) is designed using genetic algorithm (GA) to reduce the radar cross section (RCS) of a microstrip antenna in a wide frequency band. RCS reduction is realized by replacing the antenna ground plane with a coding FSS. By doing so, the maximum and average RCS reduction of the proposed structure in the X band become 24 dB and 11.9 dB, respectively. A prototype of the proposed and reference antennas were fabricated and tested. The measurement results were compared with full-wave simulation ones to benchmark the performance of the proposed antenna. Experimental results show that the 10-dB RCS reduction is from 6.25 GHz to 12 GHz (63%).

6 April 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MKMajid Karimipour
Majid Karimipour
NKNader Komjani
Nader Komjani
In this paper, a novel systematic method based on the holographic theory to design a reflectarray (RA) antenna is presented. According to the holographic technique, one can record features of electromagnetic waves impinging on a specific surface and then, whenever needed, reconstruct each of them. We exploit this property to design a single-feed RA with a multibeam linearly polarized pattern without using any iterative method such as optimization algorithms in the design process. At first, various kinds of interferograms along with related input admittance distributions are introduced according to the polarization and number of radiated beams. Afterward, a simple subwavelength metallic patch as a scalar admittance unit cell is employed to implement the input admittance distribution of the interferograms. Moreover, a fast analytical method, which is fundamentally inspired by the method of moments, has been employed to calculate the input admittance of the utilized element. Finally, as a typical case, an 18 cm × 18 cm linearly polarized RA with a two-beam radiation pattern has been manufactured and tested at 15 GHz. The sidelobe level, cross-pol, and efficiency of the antenna are found -26 dB, lower than -10 dB, and 47.2%, respectively, which meet the expectations.

5 June 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
MMMostafa Movahhedi
Mostafa Movahhedi
MKMajid Karimipour
Majid Karimipour
NKNader Komjani
Nader Komjani
This paper shows experimentally the realization of a high-gain multibeam bidirectional radiation in a wide frequency range via a planar holographic leaky wave structure where the beams can scan from backward to forward direction as the frequency varies from 12 GHz to 18 GHz. To realize these two key features, i.e. wideband characteristic, and bidirectional multiple-beam pattern, we exploit the characteristic of a wideband surface wave launcher and inherent nature a metasurface supporting TE-mode at the same time. In more detail, this antenna benefits from a TE-mode antipodal Vivaldi as a distinguished feed, which has a broadband behavior, on a surface without a metallic ground plane and realizes a high gain bidirectional multibeam pattern. A four-beam linearly polarized antenna, including two backward and broadside beams in front side and two backward and broadside beams in the back side of the antenna, is designed, fabricated and tested at 12GHz. The measured gain, side lobe level (SLL), cross-polarization, efficiency, and 3dB bandwidth of the gain, are as 17.8 dBi, -17 dB, -30 dB, 26.5%, and 43.3%, respectively, which are great achievements. Moreover, the maximum scan angle of 44°, i.e, from (θ,φ)=(30°,180) to (θ,φ)=(14°,0°) is achieved for the backward beams when the frequency varies from f=12 GHz to f=18 GHz.

13 June 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
MKMajid Karimipour
Majid Karimipour
NKNader Komjani
Nader Komjani
A multibeam radiator with each beam possessing independent polarization is developed by a single-feed holographic reflectarray (RA) antenna without using any optimization algorithms. Regardless of wave polarization, the relation between the electromagnetic properties of the antenna aperture (henceforth referred to as “hologram”) and impinging wave properties can be described by the holographic technique. For the practical implementation of such a hologram, we used a subwavelength metallic patch with anisotropic properties to satisfy the input admittance distribution of the hologram. In doing so, a fast numerical method, fundamentally inspired by the method of moments, is employed to calculate the input admittance of the element for all angles of incidence. This technique significantly speeds up the design process. Finally, as a typical case, a simple circularly polarized RA with four-beam radiation pattern was manufactured and tested at 13 GHz. The measured results showed that the aperture efficiency of 45.8%, cross-polarization discrimination of higher than 25 dB, 1 dB drop gain, 3 dB axial ratio bandwidths of 19.23% and 18.26%, sidelobe level of below -17 dB, and peak gain of around 19.43 dBi for each beam were obtained.

28 March 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
IDIman Derafshi
Iman Derafshi
NKNader Komjani
Nader Komjani
In this article, a new transmitarray (TA) antenna is designed and fabricated based on Huygens metasurfaces (HMSs). An analytical method has been used to achieve the distribution of surface parameters equivalent to HMS. In this method, the required equations for computing the surface parameters are derived using ray tracing, generalized sheet transition conditions, and two conditions of local power consumption and local impedance equalization. In order to implement these surface parameters, wire and loop unit cells are utilized, which are exposed to the radiation transversely. The array of these unit cells offers high aperture efficiency broadband TA antennas in low aperture profile. The fabricated TA antenna with a low aperture thickness of $0.2\lambda $ exhibits the bandwidth, sidelobe level (SLL), and cross-polarization level of 14%, −19 dB, and −19 dB, respectively. In addition, the high aperture efficiency of 65% is reached with this TA, which shows great improvement in comparison to previous works.

16 August 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
EFEhsan Farokhipour
Ehsan Farokhipour
BSBenedikt Sievert
Benedikt Sievert
JSJan Taro Svejda
Jan Taro Svejda
ARAndreas Rennings
Andreas Rennings
NKNader Komjani
Nader Komjani
DEDaniel Erni
Daniel Erni
This letter presents a single-layer, wide-angle, and low-cost frequency beam scanning leaky-wave antenna (LWA) based on spoof surface plasmon polaritons (SSPPs). Here, two rows of Sierpinski pre-fractal parasitic patches are placed near an ultrathin planar SSPP waveguide, which can achieve continuous backfire to nearly endfire beam scanning with increasing frequency. The overall width of the proposed antenna is only 0.75$\lambda _{\text{0}}$ (with $\lambda _{\text{0}}$ being the wavelength of the lowest operating frequency). This SSPP LWA provides high-performance backfire and broadside radiations due to applying pre-fractal units. Simulated results show that the proposed SSPP LWA achieves a wide scanning range from -90$^{\circ }$ to +58$^{\circ }$ within the frequency range of 3 to 8 GHz. The average gain and radiation efficiency of the antenna are 10.9 dBi and 88%, respectively. An antenna prototype is fabricated and measured. The measured results agree reasonably well with the simulated ones.