Michael Chukwuemeka Ekwonu

Dr. Michael Chukwuemeka Ekwonu

Pusan National University
orcid

Research Focus & Metrics

Academic Career Length

12Years (2015-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 February 2021 in Energies
Verified
Journal Article
Open access
PDF file
MNMuhammad Nasir
Muhammad Nasir
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
YPYoonseong Park
Yoonseong Park
JEJavad Abolfazli Esfahani
Javad Abolfazli Esfahani
Kyung Chun KimKyung Chun Kim
Kyung Chun Kim
This study presents a combined cooling, heating, and power system powered by biogas, suitable for small scale communities in remote locations. To run such a system, in order to obtain the daily life essentials of electricity, hot water, and cooling, municipal waste can be considered as an option. Furthermore, the organic Rankine cycle part of the organic Rankine cycle powered vapor compression chiller can be used in times of need for additional electric production. The system comprises a medium temperature organic Rankine cycle utilizing M-xylene as its working fluid, and the cooling was covered by an Isobutane vapor compression cycle powered by an R245fa employing organic Rankine cycle. The system analyzed was designated to provide 250 kW of electricity. The energetic and exergetic analysis was performed, considering several system design parameters. The impact of the design parameters in the prime mover has a much greater effect on the whole system. The system proposed can deliver cooling values at the rate between 9.19 and 22 kW and heating values ranging from 879 up to 1255 kW, depending on the design parameter. Furthermore, the second law efficiency of the system was found to be approximately 56% at the baseline conditions and can be increased to 64.5%.

7 October 2021 in Energies
Verified
Journal Article
Open access
PDF file
MNMuhammad Nasir
Muhammad Nasir
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
JEJavad Abolfazli Esfahani
Javad Abolfazli Esfahani
Kyung Chun KimKyung Chun Kim
Kyung Chun Kim
The present study offers a scheme to improve the performance of existing large-scale chillers. The system involves raising the temperature of the chiller’s cooling water stream using renewable energy sources by incorporating an organic Rankine cycle (ORC). The thermal analysis was conducted by raising the temperature of one-third of the approximately 200 ton chiller’s cooling water. The investigation was considered for ORC evaporator inlet temperature of 90~120 °C by the step of 10 °C. Various working fluids for the different ORC evaporator inlet temperatures were examined. Sensitivity analyses conducted on the degree of superheating, degree of subcooling, condenser saturation temperature, pinch point temperature differences of the ORC evaporator and condenser, and the mass flowrates of the heating and cooling streams were also reported. Genetic algorithm was employed to carry out the optimization. The best options for the ORC working fluid at the heating source ORC evaporator inlet temperatures of 90 °C was found to be DME, presenting an improvement of 48.72% in comparison with the rated coefficient of performance (COP) value of the VCC, with a renewable energy input requirement of 710 kW. At the heat source temperatures of 100 °C and 110 °C, butene, which presented an improvement in the COP equal to 48.76% and 68.85%, respectively, with the corresponding renewable energy requirements of 789.6 kW and 852 kW, was found to be the ideal candidate. Meanwhile, at the heat source inlet temperature of 120 °C, R1233zd (E), representing an improvement of 140.88% with the renewable energy input of around 1061 kW, was determined to be the most favorable ORC working fluid candidate.

3 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
MKMirae Kim
Mirae Kim
CBChen Binqi
Chen Binqi
MNMuhammad Nasir
Muhammad Nasir
Kyung Chun KimKyung Chun Kim
Kyung Chun Kim
The parallel expander ORC system is one of the solutions for providing an additional power output by improving the partial-load performance of an ORC. The parallel expander system corresponds to partial-load conditions by switching between various combinations of the expanders. During this process, the dynamic behavior occurs, which have not been characterized well in the open literature according to the best of the authors’ knowledge. In this study, we developed a dynamic modeling of an ORC system using dual expanders (DE-ORC) to study the dynamic responses during its mode changes. System components were simulated using an open-source library of ThermoCycle written in Modelica language. For each component, empirical parameters were implemented based on the experimental results. Furthermore, during the mode change that involved going from dual expander mode to singular expander mode, and to prevent the formation of the droplet in the expanders, a control strategy was proposed and simulated. The strategy involved lowering of the mass flow rate and then shifting the mode. Several timings between flow rate lowering and shifting the mode were analyzed, and the optimum shifting time was found to be in between 40 to 50 s.

4 July 2025 in Chemical Engineering Science
Verified
Journal Article
Open access
SESamuel Emebu
Samuel Emebu
ELEsko Juhani Lahdenpera
Esko Juhani Lahdenpera
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
ISIbrahim Shaikh
Ibrahim Shaikh
ALArto Laari
Arto Laari
TKTuomas Koiranen
Tuomas Koiranen

1 December 2024 in Physics of Fluids
Verified
Journal Article
Closed access
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
SPSang Hwan Park
Sang Hwan Park
DKDong Kim
Dong Kim
This paper presents a time-resolved three-dimensional (4D) flow fields measurement of the continuous phase of a turbulent impinging jet inducing foam formation using the Lagrangian particle tracking velocimetry utilizing the Shake-The-Box algorithm. With the systems equipped with four high-speed cameras, time-series of images of fluid tracer particles were acquired. The Vortex-In-Sharp (VIC#) method was used to reconstruct the Eulerian flow fields of the particle tracks. The impinging jet was characterized as plume-like along the vertical direction with two distinct layers: developing shear and fully developed shear. The streamwise vortex structures of the continuous phase were influenced by the bubble plume motion, and the results showed high amplitude oscillations of the acceleration and deceleration near the jet source resulting in the formation of ring-like vortices, which break down as the jet moves downstream with its momentum dissipated. The flow of the continuous phase of impinging jet was self-similar both at the developed shear layer and the fully developed diffusion layer beneath the water pool and is characterized as homogeneous shear flow with anisotropy turbulence. The classical assumption of self-similarity with Gaussian profiles for continuous phase velocity is verified experimentally. We found that the results show a huge potential of blue energy harvesting from the low frequency (∼2 Hz) dissipating kinetic energy of the turbulent plume-like jet underneath the impinging water surface using triboelectric nanogenerator.

1 April 2015 in International Journal of Engineering Research in Africa
Verified
Journal Article
Open access
PDF file
Michael Chukwuemeka EkwonuMichael Chukwuemeka Ekwonu
Michael Chukwuemeka Ekwonu
SPSimon Perry
Simon Perry
EOE.A. Oyedoh
E.A. Oyedoh
In this paper, the integration of Gas Engines with the Rankine cycle and Organic Rankine cycle for use as a combined cooling, heating and power (CCHP) system was investigated. The gas engine model, Organic Rankine Cycle model, Rankine Cycle model and single effect absorption chiller model were developed in Aspen HYSYS V7.3®. The system performance of the combination of the Rankine Cycle and Organic Rankine Cycle was investigated with two different configurations. The series and parallel combination of Rankine and Organic Rankine Cycle integration with the gas engine showed an increase of 7% and 15% respectively both in the overall system efficiency and power generated. The trigeneration system provided a cooling duty of 18.6 kW, a heating duty of 704 kW to a district heating system with 3.9 MW of power generated and an overall trigeneration efficiency of 70%. The system also gave a 9% increase in the power generated when compared to the gas engine without waste heat recovery whilst bottoming with Rankine cycle, Organic Rankine cycle and Absorption refrigeration system.Keywords: Modelling, Trigeneration, Gas Engines, Waste Heat Recovery, Rankine Cycle, Organic Rankine Cycle.