Distributed Acoustic Sensing (DAS) systems face increasing challenges in massive data processing and real-time fault diagnosis due to the growing complexity of industrial environments and data volume. To address these issues, an end-to-end diagnostic framework is developed, integrating Mel-Frequency Cepstral Coefficients (MFCCs) for high-efficiency signal compression and Liquid Neural Networks (LNNs) for lightweight, real-time classification. The MFCC algorithm, originally used in speech processing, is adapted to extract key features from DAS vibration signals, achieving compression ratios of 60–100× without significant information loss. LNNs’ dynamic topology and sparse activation enable high accuracy with extremely low latency and minimal computational cost, making it highly suitable for edge deployment. The proposed framework was validated both in simulated environments and on a real-world conveyor belt system at Qinhuangdao Port, where it achieved 100% accuracy across four vibration modes over 14 weeks of operation. Comparative experiments show that LNNs outperform traditional models such as 1D-CNN and LSTMs in terms of accuracy, inference speed, and model size. The proposed MFCC-LNN pipeline also demonstrates strong cross-domain generalization capabilities in pipeline monitoring, seismic detection, and speech signal processing.
A trench-assisted multicore fiber (TA-MCF) with single-supermode transmission and nearly zero flattened dispersion is proposed herein. By adding a simplified microstructure cladding with only one ring of low-index inclusions on the basis of the multicore fiber, the microstructure cladding and mode-coupling mechanism were jointly employed into the TA-MCF to modulate light transmission. This guarantees that the TA-MCFs had sufficient capability for wideband dispersion management when only pure, germanium-doped, and fluorine-doped silica glass with low index differences were chosen to form the TA-MCF. Analyses also revealed that the TA-MCFs have the merits of shorter cut-off wavelength and flatter-top optical intensity distribution compared with traditional multicore fibers. After the investigation of the structural parameters’ influences on the dispersion of the fundamental supermode, two TA-MCFs with single-supermode transmission and nearly zero flattened dispersion were designed. For the seven-core TA-MCF, the dispersion varying from −0.46 to 1.35 ps/(nm·km) in the wavelength range of 1.50 to 2.04 μm, with bending loss as low as 0.085 dB/km and 35-mm bending radius at 1550 nm was achieved with index difference less than 0.015. The TA-MCFs proposed herein have the advantages of being a quasi-single material, with an all solid scheme and simplified structure.
A kind of label-free refractive index biosensor based on long-period gratings (LPGs) inscribed in microstructured optical fibers (MOFs) is theoretically studied. The finite element method is used to visualize the mode field distribution along the grapefruit MOF. The transmission spectrum of LPG in the air or liquid is simulated by the coupled-mode theory. An immobilized biorecognition molecules layer on the inner walls of the holes in the MOF provides the ability to capture analyte molecules selectively. Numerical results show that an ultrahigh refractive index sensitivity of approximately over the refractive index range of 1.4–1.5 is achieved. Moreover, the sensitivity of the grapefruit MOF can be improved by reducing the periods of gratings. In addition, the shift of the resonant wavelength is linear to the analyte thickness with good sensitivity about . It is expected to play a great role in theoretical guidance for further development of biosensors.