Unmanned aerial vehicle (UAV) oblique photography technology is widely used in a variety of fields because of its excellent efficiency, realism, and low cost of manufacturing. However, due to the influence of lighting, occlusion, weak textures, and other factors in aerial images, the modeling results can have the problem of an incorrect structure that is inconsistent with the real scene. The edge line of a building is the main external expression of its structure. Whether the edge line is straight or not will directly affect the realism of the building, so the restoration of the edge line can improve the realism of the building. In this study, we proposed and developed a method for the restoration of the edge line of a 3D building model based on triangular mesh cutting. Firstly, the feature line of the edge line was drawn using human–computer interaction, and axis-aligned bounding box (AABB) collision detection was carried out around the feature line to determine the triangular patches to be cut. Then, the triangular cutting algorithm was used to cut the triangular patches projected onto the plane. Finally, the structure and texture of the 3D building model were reconstructed. This method allowed us to actualize the physical separation of continuous triangulation; the triangulation around the edge line was cut, and the plane was fitted. This method was able to improve cutting accuracy and edge flatness and enhance the edge features of buildings and the rendering quality of models. The experimental results showed that the edge restoration method proposed in this paper is reliable and that it can effectively improve the building rendering effect of a 3D building model based on UAV oblique photography and can also enhance the realism of the model.
16 September 2021 in Mathematical Problems in Engineering
Operating and managing single three-dimensional building model individually are critical in the application of oblique photography models. However, these models are usually complete and continuous, and the single three-dimensional building model in these models cannot be managed individually. Generally, achieving a single three-dimensional building model requires a human-computer interaction to determine the cutting range, but this process is time-consuming and inefficient. To overcome this problem, this study proposed a new method for automatically achieving single three-dimensional building model without the need for human-computer interaction. First, the point clouds of an oblique photography model are divided into virtual grids, and the point clouds in each virtual grid are seen as a whole. In this way, the number of point clouds involved in the calculation is reduced, thereby improving computing efficiency. Second, the point clouds of a building facade are extracted by setting the height difference. By comparing the height difference between the highest point and the lowest point of the grid with height difference threshold, all point clouds in the grid that do not meet the requirements are eliminated. Third, the point clouds of the building facade are classified, and the contour line is extracted by the classified point clouds. Finally, the single three-dimensional building model is achieved by reconstructing the triangles that intersect with the extracted contour line. Experimental results show that the proposed method can effectively achieve single bodies automatically from an oblique photography building model. This method is then useful for achieving single three-dimensional building model from massive oblique photography data.