Baodong Ma

Baodong Ma


Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2018 in Sensors
Verified
Journal Article
Open access
PDF file
DCDefu Che
Defu Che
ALAiman Liang
Aiman Liang
XLXuexin Li
Xuexin Li
BMBaodong Ma
Baodong Ma
Iron tailings ponds are engineered dam and dyke systems used to capture iron tailings. They are high-risk hazards with high potential energy. If the tailings dam broke, it would pose a serious threat to the surrounding ecological environment, residents’ lives, and property. Rainfall is one of the most important influencing factors causing the tailings dam break. This paper took Chengde Area, a typical iron-producing area, as the study area, and proposed a remote sensing method to evaluate the safety risk of tailings ponds under rainfall condition by using runoff coefficient and catchment area. Firstly, the vegetation coverage in the study area was estimated using the pixel dichotomy model, and the vegetation type was classified by the support vector machine (SVM) method from Landsat 8 OLI image. Based on DEM, the slope of the study area was extracted, and the catchment area of the tailings pond was plotted. Then, taking slope, vegetation coverage, and vegetation type as three influencing factors, the runoff coefficient was constructed by weight assignment of each factor using analytic hierarchy process (AHP) model in both quantitative and qualitative way. Finally, the safety risk of tailings ponds was assessed according to average runoff coefficient and catchment area in the study area. The results showed that there were 124 low-risk tailings ponds, 16 moderate-risk tailings ponds, and 4 high-risk tailings ponds in the study area. This method could be useful for selecting targeted tailings ponds for focused safety monitoring. Necessary monitoring measurements should be carried out for the high-risk and moderate-risk tailings ponds in rainy season.

6 May 2018 in Entropy
Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
YCYuteng Chen
Yuteng Chen
SZSong Zhang
Song Zhang
XLXuexin Li
Xuexin Li
With the rapid development of the steel and iron industry, ultra-low-grade iron ore has been developed extensively since the beginning of this century in China. Due to the high concentration ratio of the iron ore, a large amount of tailings was produced and many tailings ponds were established in the mining area. This poses a great threat to regional safety and the environment because of dam breaks and metal pollution. The spatial distribution is the basic information for monitoring the status of tailings ponds. Taking Changhe Mining Area as an example, tailings ponds were extracted by using Landsat 8 OLI images based on both spectral and texture characteristics. Firstly, ultra-low-grade iron-related objects (i.e., tailings and iron ore) were extracted by the Ultra-low-grade Iron-related Objects Index (ULIOI) with a threshold. Secondly, the tailings pond was distinguished from the stope due to their entropy difference in the panchromatic image at a 7 × 7 window size. This remote sensing method could be beneficial to safety and environmental management in the mining area.

20 December 2021 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
XYXiangru Yang
Xiangru Yang
YYYajiao Yu
Yajiao Yu
YSYang Shu
Yang Shu
DCDefu Che
Defu Che
Mining can provide necessary mineral resources for humans. However, mining activities may cause damage to the surrounding ecology and environment. Vegetation change analysis is a key tool for evaluating damage to ecology and the environment. Liaoning is one of the major mining provinces in China, with rich mineral resources and long-term, high-intensity mining activities. Taking Liaoning Province as an example, vegetation change in six mining areas was investigated using multisource remote sensing data to evaluate ecological and environmental changes. Based on MODIS NDVI series data from 2000 to 2019, change trends of vegetation were evaluated using linear regression. According to the results, there are large highly degraded vegetation areas in the Anshan, Benxi, and Yingkou mining areas, which indicates that mining activities have seriously damaged the vegetation in these areas. In contrast, there are considerable areas with improved vegetation in the Anshan, Fushun, and Fuxin mining areas, which indicates that ecological reclamation has played a positive role in these areas. Based on Sentinel-2A data, leaf chlorophyll content was inferred by using the vegetation index MERIS Terrestrial Chlorophyll Index (MTCI) after measurement of leaf spectra and chlorophyll content were carried out on the ground to validate the performance of MTCI. According to the results, the leaf chlorophyll content in the mines is generally lower than in adjacent areas in these mining areas with individual differences. In the Yingkou mining area, the chlorophyll content in adjacent areas is close to the magnesite mines, which means the spillover effect of environmental pollution in mines should be considerable. In the Anshan, Benxi, and Diaobingshan mining areas, the environmental stress on adjacent areas is slight. All in all, iron and magnesite open-pit mines should be monitored closely for vegetation destruction and stress due to the high intensity of mining activities and serious pollution. In contrast, the disturbance to vegetation is limited in resource-exhausted open-pit coal mines and underground coal mines. It is suggested that land reclamation should be enhanced to improve the vegetation in active open-pit mining areas, such as the Anshan, Benxi, and Yingkou mining areas. Additionally, environmental protection measures should be enhanced to relieve vegetation stress in the Yingkou mining area.

16 November 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
XLXuexin Li
Xuexin Li
ZJZiwei Jiang
Ziwei Jiang
Ruiliang PuRuiliang Pu
Ruiliang Pu
ALAiman Liang
Aiman Liang
DCDefu Che
Defu Che
Dust pollution is severe in some mining areas in China due to rapid industrial development. Dust deposited on the vegetation canopy may change its spectra. However, a relationship between canopy spectra and dust amount has not been quantitatively studied, and a pixel-scale condition for remote sensing application has not been considered yet. In this study, the dust dispersion characteristics in an iron mining area were investigated using the American Meteorological Society (AMS) and the U.S. Environmental Protection Agency (EPA) regulatory model (AERMOD). Further, based on the three-dimensional discrete anisotropic radiative transfer (DART) model, the spectral characteristics of vegetation canopy under the dusty condition were simulated, and the influence of dustfall on vegetation canopy spectra was studied. Finally, the dust effect on vegetation spectra at the canopy scale was extended to a pixel scale, and the response of dust effect on vegetation spectra at the pixel scale was determined under different fractional vegetation covers (FVCs). The experimental results show that the dust pollution along a haul road was more severe and extensive than that in a stope. Taking dust dispersion along the road as an example, the variation of vegetation canopy spectra increased with the height of dust deposited on the vegetation canopy. At the pixel scale, a lower vegetation FVC would weaken the influence of dust on the spectra. The results derived from simulation spectral data were tested using satellite remote sensing images. The tested result indicates that the influence of dust retention on the pixel spectra with different FVCs was consistent with that created with the simulated data. The finding could be beneficial for those making decisions on monitoring vegetation under dusty conditions and reducing dust pollution in mining areas using remote sensing technology.

Verified
Journal Article
Open access
PDF file
BMBaodong Ma
Baodong Ma
QLQuan Liu
Quan Liu
ZJZiwei Jiang
Ziwei Jiang
DCDefu Che
Defu Che
QKQiu KeHan
Qiu KeHan
XSXiangxiang Shang
Xiangxiang Shang
Path planning is widely used in many domains, and it is crucial for the advancement of map navigation, autonomous driving, and robot path planning. However, existing path planning methods have certain limitations for complex field scenes with undulating terrain and diverse landcover types. This paper presents an energy-efficient 3D path planning algorithm based on an improved A* algorithm and the particle swarm algorithm in complex field scenes. The evaluation function of the A* algorithm was improved to be suitable for complex field scenes. The slope parameter and friction coefficient were respectively used in the evaluation function to represent different terrain features and landcover types. The selection of expanding nodes in the algorithm depends not only on the minimum distance but also on the minimum consumption cost. Furthermore, the turning radius factor and slope threshold factor of vehicles were added to the definition of impassable points in the improved A* algorithm, so that the accessibility of path planning could be guaranteed by excluding some bends and steep slopes. To meet the requirements for multi-target path planning, the improved A* algorithm was used as the fitness function of the particle swarm algorithm to solve the traveling salesman problem. The experimental results showed that the proposed algorithm is capable of multi-target path planning in complex field scenes. Furthermore, the path planned by this algorithm is more passable and more energy efficient. In this experimental environment model, the average energy-saving efficiency of the path planned by the improved algorithm is 14.7% compared to the traditional A* algorithm. This would be beneficial to the development of ecotourism and geological exploration.

6 September 2023 in Buildings
Verified
Journal Article
Open access
PDF file
DCDefu Che
Defu Che
MSMin Su
Min Su
BMBaodong Ma
Baodong Ma
FCFeng Chen
Feng Chen
YLYining Liu
Yining Liu
YSYanen Sun
Yanen Sun
Oblique photography 3D models are increasingly used in 3D modeling and visualization, urban planning and design, smart cities, smart mines, and other fields. To ensure that 3D models can be replaced and updated, it is necessary to deal with the model holes and incomplete areas caused by the incorrect matching of feature points in the modeling process. Moreover, in 3D models of the planning and management of certain mining areas or urban areas to be developed, regions can also be delineated for replacements and updates. Due to the unsatisfactory display effect of the manually modeled models used to replace and update, the authenticity of the model texture and the detail characteristics of the model triangle meshes cannot be guaranteed during integration. Therefore, this paper proposes a 3D model triangle mesh integration method for oblique photography data which integrates the real and complete 3D models used for replacement with the incomplete part or the part of the original model that needs to be replaced. The experimental results show that this method can integrate the original terrain model and the replacement model efficiently and quickly, the integrated model has no gap, and the display effect is good, effectively achieving model repair or model update and replacement.