This paper was concerned to simulate both wet and dry bed dam break problems. A high-resolution finite volume method (FVM) was employed to solve the one-dimensional (1D) and two-dimensional (2D) shallow water equations (SWEs) using an unstructured Voronoi mesh grid. In this attempt, the robust local Lax-Friedrichs (LLxF) scheme was used for the calculating of the numerical flux at cells interfaces. The model named V-Break was run under the asymmetry partial and circular dam break conditions and then verified by comparing the model outputs with the documented results. Due to a precise agreement between those output and documented results, the V-Break could be considered as a reliable method for dealing with shallow water (SW) and shock problems, especially those having discontinuities. In addition, statistical observations indicated a good conformity between the V-Break and analytical results clearly.
The optimal sensor placement is the most important issues for structures health monitoring (SHM) of RCC (roller-compacted concrete) dams. In past studies, the main achievement focus on optimal criterions of sensor locations were considered via modal test. In this study a novel approach based on modified coordinate of modal assurance criterion (COMAC) with transferring time history analysis results to frequency domain (TTFD) for the SHM of RCC dam was evaluated. The nonlinear time history analysis of RCC dam subjected to near and far field earthquake were considered in TTFD process. The FEMCRTTFD code in MATLAB was designed as a toolbox to perform all of process of this novel approach by authors of this paper. The validation process of this code has been done via comparing with the reference study. The comparison between sensors placement that calculated by COMAC and TTFD show that the modified method has good agreement and accurate placement of smart sensors. Statistical results show that there is no significant difference between the results of TTFD method and COMAC in cracked dam, except Manjil earthquake (the mean of p-value = 0.717). The results indicate that considering modified COMAC calculation based on TTFD approach has an acceptable accuracy on identify the sensor location.
10 August 2013 in Journal of Civil Structural Health Monitoring
It is essential to know accurately characteristics of the flow over stepped spillways such as turbulent dissipation and flow regime. This study was concerned with application of FVM-ANN technique for investigation of the flow regime over broad-crested stepped spillways. For this purpose, finite volume method (FVM) was employed for numerical modeling of stepped spillways using laboratory data belonging to a previous research study. The perfect conformity of numerical and laboratory results is clearly observed according to a statistical test. Then, for development of the numerical model, different geometries of spillways were investigated and flow regimes over these spillways were obtained. Furthermore, it has been attempted to train an Artificial Neural Network (ANN) that includes two layers and entails one neuron on output layer using numerical results in addition to investigating the number of neurons at the first layer. As a result of using ANN, the flow regime can be evaluated by having the discharge per unit width over the spillway, the steps' height, and the channel slope's angle. Finally, the sensitivity analysis of the flow regime against the change of each parameter of geometry of the spillways was done. Results indicated the behavior of the flow regime against investigated parameters well.