28 March 2013 in Journal of Applied Mathematics
This paper was concerned to simulate both wet and dry bed dam break problems. A high-resolution finite volume method (FVM) was employed to solve the one-dimensional (1D) and two-dimensional (2D) shallow water equations (SWEs) using an unstructured Voronoi mesh grid. In this attempt, the robust local Lax-Friedrichs (LLxF) scheme was used for the calculating of the numerical flux at cells interfaces. The model named V-Break was run under the asymmetry partial and circular dam break conditions and then verified by comparing the model outputs with the documented results. Due to a precise agreement between those output and documented results, the V-Break could be considered as a reliable method for dealing with shallow water (SW) and shock problems, especially those having discontinuities. In addition, statistical observations indicated a good conformity between the V-Break and analytical results clearly.
25 October 2013 in Earthquakes and Structures
15 May 2013 in Strojniški vestnik - Journal of Mechanical Engineering
SNSeyed Reza Hashemi Nezhad
Seyed Reza Hashemi Nezhad
This research deals with the development of a Computational Fluid Dynamics (CFD) code called V-Flow using MATLAB for the two-dimensional modelling of unsteady flow over stepped spillways. V-Flow can be coupled with GAMBIT software and different spillway geometries can be modelled using voronoi mesh elements. The governing equations of flow over stepped spillways were discretized using the Finite Volume Method (FVM). The Power-Law scheme, implicit time approximation, GaussSeidel method, and SIMPLE algorithm were used for the discretization procedure. The flow was considered to be a laminar fluid flow with no turbulence model. The V-Flow model was validated against velocity vectors, streamlines, static pressures, dynamic pressures, and total pressures over the spillway obtained from the FLUENT model application. The experimental model simulated using both V-Flow and FLUENT for validation according to Gonzalezs experiments. A comparison between the results obtained from the application of the different models showed good agreement according to the mass imbalance, which serves as both a useful indicator of the convergence of the fluid flow solution and as an accuracy criterion to compare the V-Flow and FLUENT results
10 August 2013 in Journal of Civil Structural Health Monitoring