This study investigates control-based forcing methods for incompressible homogeneous-isotropic turbulence forced linearly in physical space which result in constant turbulent kinetic energy, constant turbulent dissipation (also constant enstrophy), or a combination of the two based on a least-squares error minimization. The methods consist of proportional controllers embedded in the forcing coefficients. During the transient, the controllers adjust the forcing coefficients such that the controlled quantity achieves very early a minimal relative error with respect to its target stationary value. Comparisons of these forcing methods are made with the non-controlled approaches of Rosales and Meneveau [“Linear forcing in numerical simulations of isotropic turbulence: Physical space implementations and convergence properties,” Phys. Fluids 17, 095106 (2005)] and Carroll and Blanquart [“A proposed modification to Lundgren’s physical space velocity forcing method for isotropic turbulence,” Phys. Fluids 25, 105114 (2013)], using direct numerical simulations (DNS) and large-eddy simulations (LES). The results indicate that the proposed constant-energetics forcing methods shorten the transient period from a user-defined artificial flow field to Navier-Stokes turbulence while maintaining steadier statistics. Additionally, the proposed method of constant kinetic-energy forcing behaves more robustly in coarse LES when initial conditions are employed that favor the occurrence of subgrid-scale backscatter, whereas the other approaches fail to provide physical turbulent flow fields. For illustration, the proposed forcing methods are applied to dilute particle-laden homogeneous-isotropic turbulent flows; the results serve to highlight the influences of the forcing strategies on the disperse-phase statistics.
In wall-bounded turbulent flows, the wall-normal gradient in turbulence intensity causes inertial particles to move preferentially toward the wall, leading to elevated concentration levels in the viscous sublayer. At first glance, wall-modelled large-eddy simulations may seem ill suited for accurately simulating this behaviour, given that the sharp gradients and coherent structures in the viscous sublayer and buffer region are unresolved in this approach. In this paper, a detailed inspection of conservation equations describing the influence of turbophoresis and near-wall structures on particle concentration profiles reveals a more nuanced view depending on the friction Stokes number. The dynamics of low and moderate Stokes number particles indeed depends strongly on the complex spatio-temporal details of streaks, ejections, and sweeps in the near-wall region. This significantly impacts the near-wall particle concentration through a biased sampling effect which provides a net force away from the wall on the particle ensemble caused by the tendency of inertial particles to accumulate in low-speed ejection regions. At higher Stokes numbers, however, this biased sampling is of minimal importance, and the particle concentration becomes inversely proportional to the wall-normal particle velocity variance at a given distance from the wall. As a result, wall-modelled large-eddy simulations can predict concentration profiles with more accuracy in the high Stokes number regime than low Stokes numbers simply by modifying the interpolation scheme for particles between the first grid point and the boundary. However, accurate representation of low and moderate Stokes number particles depends critically on information not present in standard wall-modelled large-eddy simulations.
In this study, a dynamic model for large-eddy simulations is proposed in order to describe the motion of small inertial particles in turbulent flows. The model is simple, involves no significant computational overhead, contains no adjustable parameters, and is flexible enough to be deployed in any type of flow solvers and grids, including unstructured setups. The approach is based on the use of elliptic differential filters to model the subgrid-scale velocity. The only model parameter, which is related to the nominal filter width, is determined dynamically by imposing consistency constraints on the estimated subgrid energetics. The performance of the model is tested in large-eddy simulations of homogeneous-isotropic turbulence laden with particles, where improved agreement with direct numerical simulation results is observed in the dispersed-phase statistics, including particle acceleration, local carrier-phase velocity, and preferential-concentration metrics.
A three-dimensional wavelet multi-resolution analysis of direct numerical simulations of a turbulent premixed flame is performed in order to investigate the spatially localized spectral transfer of kinetic energy across scales in the vicinity of the flame front. A formulation is developed that addresses the compressible spectral dynamics of the kinetic energy in wavelet space. The wavelet basis enables the examination of local energy spectra, along with inter-scale and subfilter-scale (SFS) cumulative energy fluxes across a scale cutoff, all quantities being available either unconditioned or conditioned on the local instantaneous value of the progress variable across the flame brush. The results include the quantification of mean spectral values and associated spatial variabilities. The energy spectra undergo, in most locations in the flame brush, a precipitous drop that starts at scales of the same order as the characteristic flame scale and continues to smaller scales, even though the corresponding decrease of the mean spectra is much more gradual. The mean convective inter-scale flux indicates that convection increases the energy of small scales, although it does so in a non-conservative manner due to the high aspect ratio of the grid, which limits the maximum scale level that can be used in the wavelet transform, and to the non-periodic boundary conditions, which exchange energy through surface forces, as explicitly elucidated by the formulation. The mean pressure-gradient inter-scale flux extracts energy from intermediate scales of the same order as the characteristic flame scale, and injects energy in the smaller and larger scales. The local SFS-cumulative contribution of the convective and pressure-gradient mechanisms of energy transfer across a given cutoff scale imposed by a wavelet filter is analysed. The local SFS-cumulative energy flux is such that the subfilter scales upstream from the flame always receive energy on average. Conversely, within the flame brush, energy is drained on average from the subfilter scales by convective and pressure-gradient effects most intensely when the filter cutoff is larger than the characteristic flame scale.
1 July 2019 in International Journal of Multiphase Flow
The worldwide growth of cancer incidence can be explained in part by changes in the prevalence and distribution of risk factors. There are geographical gaps in the estimates of cancer prevalence, which could be filled with innovative methods. We used deep learning (DL) features extracted from satellite images to predict cancer prevalence at the census tract level in seven cities in the United States. We trained the model using detailed cancer prevalence estimates from 2018 available in the CDC (Center for Disease Control) 500 Cities project. Data from 3500 census tracts covering 14,483,366 inhabitants were included. Features were extracted from 170,210 satellite images with deep learning. This method explained up to 64.37% (median = 43.53%) of the variation of cancer prevalence. Satellite features are highly correlated with individual socioeconomic and health measures that are linked to cancer prevalence (age, smoking and drinking status, and obesity). A higher similarity between two environments is associated with better generalization of the model (p = 1.10–6). This method can be used to accurately estimate cancer prevalence at a high spatial resolution without using surveys at a fraction of the cost.