This study represents the first attempt of integration, within a Forest Management Plan (FMP), of a Geographic Information System (GIS) and an Analytic Hierarchy Process (AHP) approach for the selection of the most suitable logging method. It is important to underline that the developed methodology is applicable worldwide in each environmental context in which there is a need for planning the intervention and selecting from among several possible logging methods or harvesting systems. Schematically, the main aims of this study were: (i) to develop a GIS-AHP method based on open-access GIS software; (ii) to compare the results of the simulations developed from the statements of two different groups of experts from around the world, to determine the reliability of the predictive probability of the method. The selection of the extraction methods performed with RTS (experts from research and technical sector) input data showed that the most suitable option in the major part of the study area was the cable skidder, followed by the cable yarder, and finally the forwarder. The extraction system selection performed with OS (people from the operative sector) input data revealed limited differences. Thus, considering what was reported above, it is possible to assert that the applied GIS-AHP methodology showed good performance and high consistency in the selection of the best alternatives among different extraction methods. The idea of comparing the results obtained from a survey based on a pool of researchers and forest engineers (RTS) was taken as a target simulation to be evaluated. The method based on data derived from a pool of expert forest operators (OS) was used to check for the results of the other simulation. This is an innovation in these kinds of studies. The results from the consistency check were encouraging, considering that for 51 sub-compartments, only two changed the selected extraction system between RTS and OS.

Scientific research on reduced-impact logging has been addressed to develop effective approaches and methodologies to limit soil disturbance caused by forest operations. In recent years, the development of soil trafficability maps based on soil wetness indices is the approach that has been extensively used in the context of the Boreal forests. In particular, the depth-to-water (DTW) index has been identified as an interesting solution for the identification of areas particularly sensitive to soil disturbance. This study aimed to evaluate the cost-benefit factor of DTW maps for the identification of soil-sensitive areas in the Mediterranean context. In particular, a DTW map was developed for two oak coppice areas located in Italy and harvested over a period of 2–4 years with different mechanisation levels. Soil surveys concerning soil moisture, physico-chemical properties (bulk density, penetration resistance, shear resistance, organic matter), and biological properties (soil microarthropods community measure via soil biological quality (QBS-ar) index) were carried out in these forests, checking for significant differences between the zones at DTW index ≤1 (which should be more sensitive to soil disturbance) and the other areas of the forest soil. The results obtained revealed the efficiency of a DTW index in potential areas at a higher level of soil moisture. On the other hand, the values of soil physico-chemical properties in the areas at a DTW index ≤1 did not differ significantly from the ones in other zones. However, the values of the QBS-ar index in areas with a low DTW index were significantly lower than the ones in zones at the DTW index >1. Therefore, the obtained findings reveal that the DTW index is a reliable tool to identify and predict which areas are more prone to impact soil biological properties.

Considering that forests are crucial in the ecosystem of our planet and that forests provide timber products as well as several ecosystem services, it is evident that the application of sustainable forest operations (SFOs) is of substantial importance to achieve sustainable forest management (SFM). One of the most important issues to be evaluated when dealing with SFOs is limiting the disturbance and impacts related to logging. Harvesting activities can indeed alter the conditions of soil through compaction and litter removal which can also lead to modifications from the biological point of view, for example, diminishing the presence of soil microarthropods. While keeping these objectives in focus, the aim of the present study was to evaluate physico-chemical and biological impacts on forest soil in Mediterranean beech forests after forest logging with two different extraction systems, which are forestry-fitted farm tractors equipped with winch and forwarder. Specifically, authors aimed to investigate: (i) soil disturbance levels of ground-based extraction methods; (ii) soil disturbance levels of the applied forestry intervention; (iii) soil disturbance levels between winching-skidding and forwarding. Findings showed that the physical, chemical, and biological soil features were slightly disturbed by the forestry itself. In addition, forest operations and machine traffic showed clear soil disturbance, resulting in a substantial alteration of the characteristics. Between the two extraction techniques tested, winching caused less disturbance while forwarding had stronger impacts. However, it should be noted that these impact levels are found only on approximately 28% of the surface where operations were carried out. From the evidence gathered in this study, winching seems a less impactful extraction method in the studied context. On the other hand, to decrease the impact of forwarding, some technical adjustments such as bogie-tracks, as well as improved operator training, should be applied.

Wood is a material of biological origin of fundamental importance for artisan and industrial uses. In outdoor environments, it is very attractive, but easily subjected to degradation. A valid alternative to chemical preservatives is thermal modification. The aim of this study is to evaluate ayous wood industrially subjected to thermal modification (215 °C) in order to emphasize the influence of heat treatment on selected physical and mechanical characteristics. As a result of the heat treatment, the physical and mechanical properties are generally reduced: the density in natural wood (TQ) was 379 kg/m³, in heat treated wood (TT) 319 kg/m³; the basic density in TQ was 327 kg/m³, in TT 299 kg/m³; the axial compression strength of TT was reduced by 18.1%; and the static bending strength of TT was reduced by 41.4% compared to untreated wood at 10% equilibrium moisture content (EMC). In addition, the samples, under the same environmental conditions in the laboratory, reached the equilibrium moisture content of 10% in TQ and 4% in TT.

There has been a growing awareness of the need for sustainable forest management among forest engineers during the last decades. The selection of the best harvesting system for logging operations plays a fundamental role in this effort. Nowadays, in the decision-making process, forest engineers rely on their own experience, and it is to be expected that their evaluation of the level of appropriateness may be biased. There may be a potential solution to this problem in the implementation of AHP (Analytic Hierarchy Process) in the GIS (Geographic Information System) environment. The application of AHP gives objective information and thus reduces the level of bias in deciding which logging harvest system is best to use. The aim of this study was to evaluate the reliability of a GIS-AHP approach applied to the development of the harvesting plan of a public forest estate in Central Italy. Three extraction methods were considered: forwarder, cable skidder, and all-terrain cable yarder. Thus, the GIS-AHP model was run by relying on the basic data attainable from the local forest management plan and then on detailed information provided by field data collected from 10 harvested blocks. Among these, in three blocks, the logging harvest method was changed from forwarder to cable skidder. Statistically significant differences were found between the suitability values obtained from the forest management plan and those retrieved from the field surveys for the forwarder and cable skidders but not for all-terrain cable yarders.

The selection of the most suitable alternative for harvesting operations is a challenging activity which is manageable via precision forest harvesting. In this study, an approach based on a combination of GIS (Geographic Information System) and AHP (Analytic Hierarchy Process), which rely on geospatial data and opinions of forest engineers with a good expertise on this topic, was applied in the Natural Reserve of Lamone (Latium, Italy) to select the most suitable extraction system in the oak coppice forests of the study area. The developed approach allowed for the selection among forwarder, forestry-fitted farm tractors equipped with winch and all-terrain cable yarder. The obtained results suggested that forwarder and all-terrain cable yarder were the most suitable extraction systems. The former can be applied to the major part of the study area while the application of winch was limited to forest parcel with high forest road density. The latter can be applied as the most suitable solution only in areas with low soil-bearing capacity and on steep terrain.