In this paper, the prototype of the assistive suit for lower limbs was developed. The prototype was based on an assist method with joint stiffness and antagonized angle control. The assist method comprises a system consisting of a pneumatic artificial muscle and a pull spring, which changes the joint stiffness and the antagonized angle to correspond to the movement phase and aims at coordinated motion assistance with the wearer. First, the characteristics of the developed prototype were tested. It was confirmed that the measured value of the prototype followed the target value in the relationship between torque and angle. In addition, there was hysteresis in the measured value, but it did not affect the assist. Next, the evaluation of standing-up and gait assist by measuring electromyography (EMG) of the knee extensor muscle was conducted using the prototype. In all subjects, a decrease in EMG due to the assist was confirmed. In one subject, the maximum decrease rate at the peak of the EMG was about 50% for standing-up motion and about 75% for gait motion. From the results of these assist evaluations, the effectiveness of the assist method based on the joint stiffness and antagonistic angle control using the prototype was confirmed.
20 October 2020 in Journal of Robotics and Mechatronics
In this paper, an assistance method that controls the joint stiffness and antagonized angle using variable elastic elements is proposed. The proposed system changes the joint stiffness and antagonized angle so that they correspond to the phase of movement, and performs movement assistance in cooperation with the wearer. As a structurally variable configuration of stiffness and antagonized angle, a joint structure in which an artificial muscle and tension spring are antagonistically arranged is proposed. A mathematical model of one side spring antagonized joint is proposed and its characteristics is examined.
1 January 2020 in The Proceedings of JSME annual Conference on Robotics and Mechatronics (Robomec)
In this paper, a prototype of a joint in which a pneumatic artificial muscle and a tension spring are antagonistically arranged (one-sided spring antagonized joint) was developed, and the basic characteristics of the prototype were evaluated. The relationship between the torque and the angle of the prototype showed that torque increases as the angle increases (or vice versa). It was also found that the joint stiffness and the antagonized angle changed with each applied pressure. From these results, it was confirmed that the prototype showed the same behavior as the theoretical one-sided spring antagonized joint.
About Me
I have researched an exoskeleton-type assistive suit using pneumatic artificial muscles.
I have researched an exoskeleton-type assistive suit using pneumatic artificial muscles.