Large caissons are extensively applied as deep-water foundations in marine engineering. In fact, caissons are generally prefabricated and transported to project site by wet towing. Motion responses of large caissons and those occurring during the towing process were investigated, and CO₂ emissions under various conditions were calculated. These are all considered to ensure towing safety and environmental protection. The caisson resistance coefficient was simulated via Ansys Fluent software. The effects of towrope length, towing speed, and drift depth on the motion responses of caissons under the combined action of wind and wave were evaluated via Ansys AQWA software. Maximum heave value was dominantly affected by rope length and draft depth, and its fluctuation was highly influenced by towing speed and draft depth. However, all of the above mentioned factors had insignificant influences on pitch response. When towing existed, rope tension was rapidly increased from zero to a constant value that depended on towing speed and drift depth. However, the speed of achieving this stable phase depended on the length of the towrope.

Variable and complex marine environmental loads combined with wave resistance and the insufficient controllability of large caisson structures pose serious challenges during maritime towing. Cable breakage events are common, and improper behaviors could give rise to a variety of accidents. This work explored the dynamic responses of large caisson structures following towing cable breakage under irregular waves combined with harsh currents. Two types of cable breakage, i.e., main bridle and towing bridle breakage, were taken into account. Four potential wave–current combinations were assumed for each situation according to direction. The obtained results show that drag rope breakage could give rise to lateral shifts in the structure, which can become a serious condition when exposed to angled waves. Additionally, following breakage, significant force fluctuations took place in the remaining intact cables. For main cable breakage, both lateral and backward displacements were observed in the structure, which gradually entered a ‘flowing with the wave’ state. Furthermore, under the two abovementioned cable breakage conditions, the structure air gap consistently exceeded 2.3 m, ignoring the possibility of a wave slamming event.