Tuan Pham

Dr. Tuan Pham

Faculty of Mechanical Engineering, Ho Chi Minh City University of Technology, VNU-HCM, Ho Chi Minh City 700000, Vietnam
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 July 2019 in Journal of Mechanisms and Robotics
Verified
Journal Article
Open access
TPTuan Pham
Tuan Pham
Swee Hock YeoSwee Hock Yeo
Swee Hock Yeo
TTTat Joo Teo
Tat Joo Teo
Pan WangPan Wang
Pan Wang
Sharon NaiSharon Nai
Sharon Nai
This paper presents a novel three degrees-of-freedom (DOF) compliant parallel mechanism (CPM) with a fully decoupled spatial motion (θX−θY−Z) and optimized mechanical properties. To design the CPM using the beam-based structural optimization method, several novel criteria for synthesizing three-legged CPMs with fully decoupled motions are derived. The obtained results suggest that the synthesized CPM delivers a diagonal compliance matrix, a large workspace of 10deg×10deg×7mm, fast dynamic response of ∼100Hz, and good stiffness performance whereby the translational and rotational stiffness ratios are ∼3600 and ∼570, respectively. A prototype of the synthesized CPM is fabricated using one of the three-dimensional (3D) printing technologies, electron beam melting (EBM). Experimental results have shown that the 3D printed CPM can produce the full workspace with deterministic mechanical properties whereby the highest deviations between the theoretical and experimental results are 11.2% and 1% for stiffness and dynamic behaviors, respectively. Importantly, the decoupled-motion characteristic is also verified via an energy approach, i.e., the energies of the undesired parasitic motions are minor (<1%) as compared with the energy of the desired motion. In addition, several comparisons are conducted to clarify the advantages of the synthesized CPM to the existing designs. All these investigations suggest that the proposed CPM can be used in precision positioning systems due to the good stiffness characteristics, large workspace, fast dynamic response, and decoupled output motions.

10 January 2021 in Machines
Verified
Journal Article
Open access
PDF file
TPTuan Pham
Tuan Pham
SYSong Huat Yeo
Song Huat Yeo
TTTat Joo Teo
Tat Joo Teo
Pan WangPan Wang
Pan Wang
Sharon NaiSharon Nai
Sharon Nai
This paper presents a novel six degrees-of-freedom (DOF) compliant parallel mechanism (CPM) with decoupled output motions, large workspace of ≥6 mm for translations and ≥12° for rotations, optimized stiffness, and dynamic properties. The working range and the motion decoupling capability of the six-DOF CPM are experimentally verified, and the mechanical properties are shown to be predictable. The proposed CPM is synthesized by applying the beam-based structural optimization method together with the criteria for achieving motion decoupling capability. In order to improve the dynamic behaviors for the CPM, cellular structure is used to design its end effector. The obtained results show that the dynamic performance of the CPM with cellular end effector is significantly enhanced with the increase of 33% of the first resonance frequency as compared to the initial design. Performances of the three-dimensional (3D)-printed prototype are experimentally evaluated in terms of mechanical characteristics and decoupled motions. The obtained results show that the actual stiffness and dynamic properties agree with the predictions with the highest deviation of ~10.5%. The motion decoupling capability of the CPM is also demonstrated since almost input energy (>99.5%) generates the desired output motions while the energy causes parasitic motions is only minor (<0.5%).

22 April 2022 in Mathematics
Verified
Journal Article
Open access
PDF file
TPTuan Pham
Tuan Pham
SYSong Huat Yeo
Song Huat Yeo
TTTat Joo Teo
Tat Joo Teo
A three-legged compliant parallel mechanism (3L-CPM) achieves fully decoupled motions when its theoretical 6 × 6 stiffness/compliance matrix is a diagonal matrix, which only contains diagonal components, while all non-diagonal components are zeros. Because the motion decoupling capability of 3L-CPMs is essential in the precision engineering field, this paper presents the fundamental criteria for designing 3L-CPMs with fully decoupled motions, regardless of degrees-of-freedom and the types of flexure element. The 6 × 6 stiffness matrix of a general 3L-CPM is derived based on the orientation of each flexure element, e.g., thin/slender beam and notch hinge, etc., and its relative position to the moving platform. Based on an analytical solution, several requirements for the flexure elements were identified and needed to be satisfied in order to design a 3L-CPM with a diagonal stiffness/compliance matrix. In addition, the developed design criteria were used to analyze the decoupled-motion capability of some existing 3L-CPM designs and shown to provide insight into the motion characteristics of any 3L-CPM.

15 December 2021
Verified
Book Chapter
Closed access
PDF file
MNMinh Tuan Nguyen
Minh Tuan Nguyen
VNVan Tu Nguyen
Van Tu Nguyen
TPTuan Pham
Tuan Pham

12 July 2023 in Machines
Verified
Journal Article
Open access
PDF file
VLVin Low
Vin Low
SYSong Huat Yeo
Song Huat Yeo
TPTuan Pham
Tuan Pham
This paper proposes an improved beam-based method to synthesize a compliant parallel mechanism (CPM) with multiple degrees of freedom (DoFs). The proposed method utilizes a structural optimization technique to synthesize a three-legged CPM with a single-beam structure constructed by two perpendicular segments in each leg to achieve the desired DoFs and fully decoupled motion. In addition, an objective function is proposed to optimize the primary resonant frequencies in actuating directions to targeted values to achieve the desired dynamic behaviors. A 4-DoF CPM, with one translation and three rotations, is synthesized using the improved beam-based method and all of the primary resonant frequencies are optimized to the targeted values. The 4-DoF CPM prototype is fabricated monolithically and evaluated experimentally in terms of its mechanical characteristics, workspace, and resonant modes. The obtained results show that the experimental stiffness and dynamic properties agree with the predictions. In particular, the prototype has good motion decoupling capability, as reflected by the high stiffness ratios of more than 500 between the non-actuating and actuating directions; the large workspaces of up to 4.0 mm and 7.2° for the translation and rotations, respectively; and the resonant frequencies being close to the targeted ones. In addition, the highest deviations between the predicted and experimental results are 9.49% and 9.13% for the stiffness and dynamic behaviors, respectively, demonstrating the correctness and effectiveness of the proposed method.

25 November 2020 in Materials Science Forum
Verified
Journal Article
Closed access
PDF file
TPTuan Pham
Tuan Pham
Swee Hock YeoSwee Hock Yeo
Swee Hock Yeo
TTTat Joo Teo
Tat Joo Teo
Pan WangPan Wang
Pan Wang
Sharon NaiSharon Nai
Sharon Nai
Electron beam melting (EBM) technology has been popularly used to fabricate flexible devices that performance is directly determined by the elastic deformation of thin beams/flexures. This paper presents the experimental investigation on the effective thickness which determines the mechanical properties of beam-based flexures built by EBM method and Ti6Al4V material. The findings show that the effective thickness of EBM-printed beams is different from the designed value regarding to the building direction. A coefficient factor is proposed to compensate this difference. The experimental results suggest that with EBM-printed flexures having large thickness of ≥ 0.7 mm, the coefficient factors become consistent.