The problem of loss of strength caused by the conversion reaction with calcium aluminate cements (CAC) is well known. It has been shown that the addition of ground granulated blast furnace slag (GGBS) to CAC inhibits the conversion process. Different slags can have a different chemical and mineralogical composition depending on their origin and production process, which can significantly influence their reactivity. This work investigated the extent to which the R3 test, developed for Portland cement and based on isothermal calorimetry and/or bound water, was used to predict the reactivity of ground granulated blast furnace slag in a CAC. Mortars and cement pastes with a 30% replacement of slag were tested to evaluate their compressive strength and microstructure. The results show that slags with higher reactivity due to their hydraulic properties lead to a lower compressive strength loss within the first 6 h, a higher strength loss after 24 h due to stratlingite formation and a lower strength loss after 28 days due to pozzolanic reaction and stratlingite formation. The results also confirm that the R3 test was used as a rapid method to predict the effects of slag on the compressive strength of CAC.
This study examines alkali-activated concrete (AAC) containing 15 wt.% wood biomass ash (WBA) as a partial precursor replacement for precast street furniture. The bench was produced using ground granulated blast furnace slag (GGBFS), WBA, and graded aggregates, activated with sodium hydroxide and sodium silicate solution. Fresh properties, including workability and density, were assessed, while hardened concrete was evaluated for compressive and tensile strength, modulus of elasticity, water absorption, and freeze–thaw resistance. The results indicate that the AAC demonstrates high workability, long-term strength development, and adequate durability, confirming its potential as a sustainable, high-performance alternative to conventional concrete for outdoor urban applications.