Timely and accurate estimation of the area and distribution of crops is vital for food security. Optical remote sensing has been a key technique for acquiring crop area and conditions on regional to global scales, but great challenges arise due to frequent cloudy days in southern China. This makes optical remote sensing images usually unavailable. Synthetic aperture radar (SAR) could bridge this gap since it is less affected by clouds. The recent availability of Sentinel-1A (S1A) SAR imagery with a 12-day revisit period at a high spatial resolution of about 10 m makes it possible to fully utilize phenological information to improve early crop classification. In deep learning methods, one-dimensional convolutional neural networks (1D CNNs), long short-term memory recurrent neural networks (LSTM RNNs), and gated recurrent unit RNNs (GRU RNNs) have been shown to efficiently extract temporal features for classification tasks. However, due to the complexity of training, these three deep learning methods have been less used in early crop classification. In this work, we attempted to combine them with an incremental classification method to avoid the need for training optimal architectures and hyper-parameters for data from each time series. First, we trained 1D CNNs, LSTM RNNs, and GRU RNNs based on the full images’ time series to attain three classifiers with optimal architectures and hyper-parameters. Then, starting at the first time point, we performed an incremental classification process to train each classifier using all of the previous data, and obtained a classification network with all parameter values (including the hyper-parameters) at each time point. Finally, test accuracies of each time point were assessed for each crop type to determine the optimal time series length. A case study was conducted in Suixi and Leizhou counties of Zhanjiang City, China. To verify the effectiveness of this method, we also implemented the classic random forest (RF) approach. The results were as follows: (i) 1D CNNs achieved the highest Kappa coefficient (0.942) of the four classifiers, and the highest value (0.934) in the GRU RNNs time series was attained earlier than with other classifiers; (ii) all three deep learning methods and the RF achieved F measures above 0.900 before the end of growth seasons of banana, eucalyptus, second-season paddy rice, and sugarcane; while, the 1D CNN classifier was the only one that could obtain an F-measure above 0.900 for pineapple before harvest. All results indicated the effectiveness of the solution combining the deep learning models with the incremental classification approach for early crop classification. This method is expected to provide new perspectives for early mapping of croplands in cloudy areas.

Accurate crop type maps play an important role in food security due to their widespread applicability. Optical time series data (TSD) have proven to be significant for crop type mapping. However, filling in missing information due to clouds in optical imagery is always needed, which will increase the workload and the risk of error transmission, especially for imagery with high spatial resolution. The development of optical imagery with high temporal and spatial resolution and the emergence of deep learning algorithms provide solutions to this problem. Although the one-dimensional convolutional neural network (1D CNN), long short-term memory (LSTM), and gate recurrent unit (GRU) models have been used to classify crop types in previous studies, their ability to identify crop types using optical TSD with missing information needs to be further explored due to their different mechanisms for handling invalid values in TSD. In this research, we designed two groups of experiments to explore the performances and characteristics of the 1D CNN, LSTM, GRU, LSTM-CNN, and GRU-CNN models for crop type mapping using unfilled Sentinel-2 (Sentinel-2) TSD and to discover the differences between unfilled and filled Sentinel-2 TSD based on the same algorithm. A case study was conducted in Hengshui City, China, of which 70.3% is farmland. The results showed that the 1D CNN, LSTM-CNN, and GRU-CNN models achieved acceptable classification accuracies (above 85%) using unfilled TSD, even though the total missing rate of the sample values was 43.5%; these accuracies were higher and more stable than those obtained using filled TSD. Furthermore, the models recalled more samples on crop types with small parcels when using unfilled TSD. Although LSTM and GRU models did not attain accuracies as high as the other three models using unfilled TSD, their results were almost close to those with filled TSD. This research showed that crop types could be identified by deep learning features in Sentinel-2 dense time series images with missing information due to clouds or cloud shadows randomly, which avoided spending a lot of time on missing information reconstruction.

Generally, there is an inconsistency between the total regional crop area that was obtained from remote sensing technology and the official statistical data on crop areas. When performing scale conversion and data aggregation of remote sensing-based crop mapping results from different administrative scales, it is difficult to obtain accurate crop planting area that match crop area statistics well at the corresponding administrative level. This problem affects the application of remote sensing-based crop mapping results. In order to solve the above problem, taking Fucheng County of Hebei Province in the Huanghuaihai Plain of China as the study area, based on the Sentinel-2 normalized difference vegetation index (NDVI) time series data covering the whole winter wheat growth period, the statistical data of the regional winter wheat planting area were regarded as reference for the winter wheat planting area extracted by remote sensing, and a new method for winter wheat mapping that is based on similarity measurement indicators and their threshold optimizations (WWM-SMITO) was proposed with the support of the shuffled complex evolution-University of Arizona (SCE-UA) global optimization algorithm. The accuracy of the regional winter wheat mapping results was verified, and accuracy comparisons with different similarity indicators were carried out. The results showed that the total area accuracy of the winter wheat area extraction by the proposed method reached over 99.99%, which achieved a consistency that was between the regional remote sensing-based winter wheat planting area and the statistical data on the winter wheat planting area. The crop recognition accuracy also reached a high level, which showed that the proposed method was effective and feasible. Moreover, in the accuracy comparison of crop mapping results based on six different similarity indicators, the winter wheat distribution that was extracted by root mean square error (RMSE) had the best recognition accuracy, and the overall accuracy and kappa coefficient were 94.5% and 0.8894, respectively. The overall accuracies of winter wheat that were extracted by similarity indicators, such as Euclidean distance (ED), Manhattan distance (MD), spectral angle mapping (SAM), and spectral correlation coefficient (SCC) were 94.1%, 93.9%, 93.3%, and 92.8%, respectively, and the kappa coefficients were 0.8815, 0.8776, 0.8657, and 0.8558, respectively. The accuracy of the winter wheat results extracted by the similarity indicator of dynamic time warping (DTW) was relatively low. The results of this paper could provide guidance and serve as a reference for the selection of similarity indicators in crop distribution extraction and for obtaining large-scale, long-term, and high-precision remote sensing-based information on a regional crop spatial distribution that is highly consistent with statistical crop area data.

Information exchange between building information modelling (BIM) and geographic information system (GIS) is problematic, especially in terms of semantic information. Graph-based technologies, such as the resource description framework (RDF) and the labelled property graph (LPG), are promising in solving this problem. These two technologies are different but have not been systematically investigated in the context of BIM/GIS integration. This paper presents our systematic investigation into these two technologies, trying to propose the proper one for BIM/GIS data integration. The main findings are as follows. (1) Both LPG-based databases and RDF-based databases can be generally considered graph databases, but an LPG-based database is considered a native graph database, while an RDF-based database is not. (2) RDF suits applications focusing more on linking data and sharing data, and (3) LPG-based graph database suits applications focusing more on data query and analysis. An LPG-based graph database is thus proposed for BIM/GIS data integration. This review can facilitate the use of graph technology in BIM/GIS integration.

In-season crop-type maps are required for a variety of agricultural monitoring and decision-making applications. The earlier the crop type maps of the current growing season are obtained, the more beneficial it is for agricultural decision-making and management. With the availability of a large amount of high spatiotemporal resolution remote sensing data, different data sources are expected to increase the frequency of data acquisition, which can provide more information in the early season. To explore the potential of integrating different data sources, a Dual-1DCNN algorithm was built based on the CNN model in this study. Moreover, an incremental training method was used to attain the network on each data acquisition date and obtain the best detection date for each crop type in the early season. A case study for Hengshui City in China was conducted using time series of Sentinel-1A (S1A) and Sentinel-2 (S2) attained in 2019. To verify this method, the classical methods support vector machine (SVM), random forest (RF), and Mono-1DCNN were implemented. The input for SVM and RF was S1A and S2 data, and the input for Mono-1DCNN was S2 data. The results demonstrated the following: (1) Dual-1DCNN achieved an overall accuracy above 85% at the earliest time.; (2) all four types of models achieved high accuracy (F1s were greater than 90%) on summer maize after sowing one month later; (3) for cotton and common yam rhizomes, Dual-1DCNN performed best, with its F1 reaching 85% within 2 months after cotton sowing, 15 days, 20 days, and 45 days ahead of Mono-1DCNN, SVM, and RF, respectively, and its extraction of the common yam rhizome was achieved 1–2 months earlier than other methods within the acceptable accuracy. These results confirmed that Dual-1DCNN offered significant potential in the in-season detection of crop types.

Spatializing crop yield statistical data with administrative divisions as the basic unit helps reveal the spatial distribution characteristics of crop yield and provides necessary spatial information to support field management and government decision-making. However, owing to an insufficient understanding of the factors affecting yield, accurately depicting its spatial differences remains challenging. Taking Hailun city, Heilongjiang Province, as an example, this study proposes a yield downscaling method based on the standardized deviation from the mean of the comprehensive crop condition index (CCCI) during key phenological periods of the growing season. First, Sentinel-2 remote sensing data were used to retrieve crop condition parameters during key phenological periods, and the CCCI was constructed using the correlation between crop condition parameters in key phenological periods and statistical yield as the weight. Subsequently, regression analysis and the entropy weight method were applied to determine the spatiotemporal dynamic weights of the CCCI during key phenological stages and to calculate the standardized deviation from the mean. By combining these two components, the comprehensive spatial difference index of the crop growth condition (CSDICGC) was derived, which offered a new way to characterize the discrepancies between the pixel-level yield and statistical yield, thereby downscaling the yield statistical data from the administrative unit to the pixel scale. The results indicated that this method achieved a regional accuracy close to 100%, with a strong fit at the pixel scale. Pixel-level accuracy validation against ground-truth maize yield data resulted in an R² of 0.82 and a mean relative error (MRE) of 4.75%. The novelty of this study was characterized by the integration of multistage crop condition parameters with dynamic spatiotemporal weighting to overcome the limitations of single-index methods. The crop yield statistical data downscaling spatialization method proposed in this paper is simple and efficient and has the potential to be popularized and applied over relatively large regions.