Vivianite (Fe₃(PO₄)₂⋅8H₂O) is a potential phosphorus (P) recovery product from wastewater treatment plants (WWTPs). However, routine methods for quantification of vivianite bound P (vivianite-P) are needed to establish the link between vivianite formation and operating conditions, as current approaches require specialized instrumentation (Mössbauer or synchrotron). This study modified a conventional sequential P extraction protocol by insertion of an extraction step (0.2% 2,2'-bipyridine + 0.1 M KCl) targeting vivianite-P (Gu et al., Water Research, 2016, 103, 352-361). This protocol was tested on digested and dewatered sludge from two WWTPs, in which vivianite (molar Fe:P ratios of 1.0-1.6) was unambiguously identified by optical microscopy, powder X-ray diffraction, and scanning electron microscopy with energy dispersive X-ray spectroscopy. The results showed that vivianite-P was separated from iron(III)-bound P (Fe(III)-P) in the sludge. Vivianite-P constituted about half of the total P (TP) in the sludge from a Fe dosing chemical P removal (CPR) WWTP, but only 16-26% of TP in the sludge from a WWTP using a combination of Fe dosing CPR and enhanced biological P removal (EBPR). The modified protocol revealed that Fe-bound P (Fe-P, i.e., vivianite-P + Fe(III)-P) was the dominant P fraction, in agreement with quantitative ³¹P nuclear magnetic resonance (NMR) experiments. Moreover, it was shown that the conventional P extraction protocol underestimated the Fe-P content by 6-35%. The established protocol represents a reliable in-house analytical method that can distinguish and quantify vivianite-P and Fe(III)-P in sludge, i.e. facilitate optimized vivianite production at WWTPs.

The structured adsorption filter material is one of the ways to enhance the practical applicability of powdered adsorbents, which have limitations in the real water treatment process due to difficulty in the separation process. In this study, three-dimensional (3D) printing technology was applied to prepare filter materials for water treatment processes. A 3D-printed graphene-oxide (GO)-based adsorbent is prepared on a polylactic acid (PLA) scaffold. The surface of the PLA scaffold was modified by subjecting it to strong alkaline or organic solvent treatment to enhance GO doping for realizing effective adsorption of cationic dye solutions. When subjected to 95% acetone treatment, the structural properties of PLA changed, and particularly, two main hydrophilic functional groups (carboxylic acids and hydroxyls) were newly formed on the PLA through cleavage of the ester bond of the aliphatic polyester. Owing to these changes, the roughness of the PLA surface increased, and its tensile strength decreased. Meanwhile, its surface was doped mainly with GO, resulting in approximately 75% methylene blue (MB) adsorption on the 3D-printed GO-based PLA filter. Based on the established optimal pretreatment conditions, a kinetic MB sorption study and an isotherm study were conducted to evaluate the 3D-printed GO-based PLA filter. The pseudo-second-order model yielded the best fit, and the MB adsorption was better fitted to the Langmuir isotherm. These results suggested that chemical adsorption was the main driver of the reaction, and monolayer sorption occurred on the adsorbent surface. The results of this study highlight the importance of PLA surface modification in enhancing GO doping and achieving effective MB adsorption in aqueous solutions. Ultimately, this study highlights the potential of using 3D printing technology to fabricate the components required for implementing water treatment processes.

We prepared hybrids consisting of Angelica gigas Nakai (AGN) root or flower extract and layered double hydroxide (LDH) for potential anticancer nanomedicine, as decursin species (DS) in AGN are known to have anticancer activity. Dimethylsulfoxide solvent was determined hybridization reaction media, as it has affinity to both AGN and LDH moiety. In order to develop inter-particle spaces in LDH, a reversible dehydration-rehydration, so-called reconstruction route, was applied in AGN-LDH hybridization. Quantitative analyses on AGN-LDH hybrids indicated that the content of DS was two times more concentrated in the hybrids than in extract itself. Using X-ray diffraction, FT-IR spectroscopy, scanning electron microscopy, and zeta-potential measurement, we found that AGN extract moiety was incorporated into inter-particle spaces of LDH nanoparticles during the reconstruction reaction. Time-dependent DS release from hybrids at pH 7.4 (physiological condition) and pH 4.5 (lysosomal condition) exhibited a pH-dependent release of extract-incorporated LDH hybrids. An anticancer activity test using HeLa, A549, and HEK293T cells showed that the AGN-LDH hybrid, regardless of extract type, showed enhanced anticancer activity compared with extract alone at an equivalent amount of DS, suggesting a nanomedicine effect of AGN-LDH hybrids.