• Acoustic wave induces microstreaming, bubble oscillation, microjetting, and shockwave. • Ultrasound assists in improving nanocellulose properties and production efficiency. • Effects of ultrasonic parameters on nanocellulose extraction and surface modification. • Barriers to ultrasound application and avenues for future developments.

Research and development of nanocellulose and nanocellulose-reinforced composite materials have garnered substantial interest in recent years. This is greatly attributed to its unique functionalities and properties, such as being renewable, sustainable, possessing high mechanical strengths, having low weight and cost. This review aims to highlight recent developments in incorporating nanocellulose into rubber matrices as a reinforcing filler material. It encompasses an introduction to natural and synthetic rubbers as a commodity at large and conventional fillers used today in rubber processing, such as carbon black and silica. Subsequently, different types of nanocellulose would be addressed, including its common sources, dimensions, and mechanical properties, followed by recent isolation techniques of nanocellulose from its resource and application in rubber reinforcement. The review also gathers recent studies and qualitative findings on the incorporation of a myriad of nanocellulose variants into various types of rubber matrices with the main goal of enhancing its mechanical integrity and potentially phasing out conventional rubber fillers. The mechanism of reinforcement and mechanical behaviors of these nanocomposites are highlighted. This article concludes with potential industrial applications of nanocellulose-reinforced rubber composites and the way forward with this technology.

This review provides a comprehensive overview of ultrasonic wave propagation, with a primary focus on high-power ultrasound systems where cavitation bubbles are likely to occur. The review is structured to guide readers through the historical development of cavitation models, from early works such as the Rayleigh-Plesset equation to more advanced numerical approaches. It explores the dynamics of cavitation bubbles, their physical effects, and the key factors influencing bubble formation, growth, and collapse. In addition to bubble-induced cavitation, the review addresses nonlinear wave propagation in the absence of bubbles, highlighting phenomena such as harmonic generation and shock wave formation. A detailed discussion on the numerical modelling of ultrasonic systems follows, covering linear and nonlinear approaches, boundary conditions, and the challenges of accurately simulating cavitating systems. The review concludes with an analysis of recent developments, emerging trends, and future directions in computational modelling for ultrasonic applications. By presenting a structured overview of both the theoretical and practical aspects of ultrasonic wave propagation, this work aims to provide a foundation for future research and design improvements in sonochemical and acoustic systems.

Nanocellulose (CNF) has emerged as a promising alternative to synthetic petroleum-based polymers, but the conventional preparation process involves multiple tedious steps, heavily dependent on chemical input, and proves cost-inefficient. This study presented an, in situ ultrasound-assisted extraction using deep eutectic solvent (DES) based on choline chloride and oxalic acid for more facile production of CNF from raw durian husk fibers. FESEM analysis confirmed the successful extraction of web-like nanofibril structure with width size ranging from 18 to 26 nm. Chemical composition analysis and FTIR revealed the selective removal of lignin and hemicellulose from the raw fiber. As compared to post-ultrasound treatment, in situ ultrasound-assisted extraction consistently outperforms, yielding a higher CNF yield with finer fiber width and significantly reduced lignin content. Integrating this eco-friendly in situ ultrasonication-assisted one-pot extraction method with a 7.5 min interval yielded the highest CNF yield of 58.22 % with minimal lignin content. The superior delignification ability achieved through the proposed in situ ultrasound-assisted protocol surpasses the individual efficacy of DES and ultrasonication processes, neither of which yielded CNF in our experimental setup. This single-step fabrication process significantly reduces chemical usage and streamlines the production steps yielding web-structured CNF that is ideal for sustainable application in membrane and separator.