Cho CH, et al. Yonsei Med J. 2015 May;56(3):772-777. https://doi.org/10.3349/ymj.2015.56.3.772

Background and objectives: The differences between computed radiography-based teleoroentgenograms (CR-based teleoroentgenograms) and an EOS^® imaging system were evaluated by measuring lower extremity lengths and alignments. Materials and methods: The leg length [L], femur length [F], tibia length [T], and hip–knee–ankle (HKA) angle were measured in 101 patients with lower extremity disease by a CR-based teleoroentgenogram with computed radiography and an EOS^®. The additive length of the femoral and tibial segments (F + T) was determined by adding the two length values. Then, the differences among all five parameters between the two techniques were analyzed. The magnification (mm) was calculated by subtracting the length measurements on the EOS^® from those in the scanogram. Furthermore, the magnification percentage (%) was calculated by dividing the magnification with the measurements on the EOS^®. Results: The magnification errors (mean ± standard deviation), when comparing both right and left sides, were 7.80 ± 1.41%, 7.3 ± 6.01%, 5.16 ± 1.25%, and 6.45 ± 0.94% for L, F, T, and F + T, respectively. For limb length, the CR-based teleoroentgenogram had an average magnification of 6.8% (range, 5.2 to 7.8%) compared to the EOS^® imaging. The two groups displayed a statistical difference (p < 0.01), except for the HKA angle. Conclusions: The CR-based teleoroentgenogram had a magnification of about 6.8% compared to the EOS^® imaging system in evaluating lower extremity length. Therefore, more attention must be given to CR-based teleoroentgenograms to correct angular deformities.

Three-dimensional (3D)-printing technology is revolutionizing orthopedic oncology by providing precise, customized solutions for complex bone defects following tumor resection. Traditional modular endoprostheses are prone to complications such as fretting corrosion and implant failure, underscoring the need for innovative approaches. This case series reports on three patients treated with 3D-printed, patient-specific prostheses and cutting guides. Preoperative CT and MRI data were used to design implants tailored to each patient’s anatomy, manufactured using electron beam melting technology with a titanium–aluminum–vanadium alloy. Functional outcomes showed significant improvements: in Case I, AOFAS improved from 71 to 96, and VAS decreased from 6 to 1; in Case II, AOFAS increased from 65 to 79, and VAS decreased from 5 to 3. Radiographic evaluations demonstrated stable prosthesis placement and early evidence of bone integration in Cases I and II, while in Case III, localized disease control was achieved before systemic progression. This case series highlights the transformative potential of 3D-printed prostheses in addressing the challenges of reconstructing anatomically complex defects. By enabling precise tumor resection and improving functional outcomes, this approach can advance current practices in orthopedic oncology. Further research should explore larger cohorts and use cost-effectiveness analyses to validate these findings and facilitate broader clinical adoption.

Injury to the triangular fibrocartilage complex (TFCC) is one of the most common complications following a fracture of the distal radius. In this study, an examination of TFCC injuries in patients with distal-radius fractures was conducted using magnetic-resonance imaging (MRI); the aim of the study was to analyze the prevalence of TFCC injury as well as to suggest acceptable radiologic parameters for use in prediction of the injury pattern. Fifty-eight patients with distal-radius fractures who underwent MRI prior to undergoing open-reduction surgery between April 2020 and July 2021 were included in this study. An analysis of various radiologic parameters, the fracture type, and the MRI classification of TFCC injuries was performed. Radiologic parameters were used in the evaluation of distal radioulnar joint (DRUJ), radial shortening, and the dorsal angularity of the fracture. All of the patients in this study had definite traumatic TFCC injuries. A statistical relationship was observed between the radial length gap between the intact wrist and the injured wrist, which represents relative radial shortening, and the pattern of TFCC injury. In conclusion, the shortening of the distal radius, causing peripheral soft tissue of the ulnar side to become tauter, is highly relevant with regard to the pattern of TFCC injury. However, because no data on the clinical outcome were utilized in this study, it is lacking in clinical perspective. The conduct of further studies on patients’ clinical outcome will be necessary.

Although spontaneous extensor tendon rupture often occurs in association with rheumatoid arthritis, extensor tendon rupture associated with osteoarthritis of the distal radioulnar joint has been rarely reported.