Sang-Sun Yoo

Prof. Sang-Sun Yoo


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 June 2023 in Sensors
Verified
Journal Article
Open access
PDF file
MKMin-Su Kim
Min-Su Kim
SYSang-Sun Yoo
Sang-Sun Yoo
This paper presents a low-noise amplifier (LNA) with an integrated input and output matching network designed using RF-SOI technology. This LNA was designed with a resistive feedback topology and an inductive peaking technology to provide 600 MHz of bandwidth in the N79 band (4.4 GHz to 5.0 GHz). Generally, the resistive feedback structure used in broadband applications allows the input and output impedance to be made to satisfy the broadband conditions through low-impedance feedback. However, feedback impedance for excessive broadband characteristics can degrade the noise performance as a consequence. To achieve a better noise performance for a bandwidth of 600 MHz, the paper provided an optimized noise performance by selecting the feedback resistor value optimized for the N79 band. Additionally, an inductive peaking technique was applied to the designed low-noise amplifier to achieve a better optimized output matching network. The designed low-noise amplifier simulated a gain of 20.68 dB and 19.94 dB from 4.4 to 5.0 GHz, with noise figures of 1.57 dB and 1.73 dB, respectively. The input and output matching networks were also integrated, and the power consumption was designed to be 9.95 mA at a supply voltage of 1.2 V.

25 January 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
MKMin-Su Kim
Min-Su Kim
SYSang-Sun Yoo
Sang-Sun Yoo
This paper presents an optimum layout method of a low-power, digitally controlled oscillator (DCO) for a Bluetooth low-energy (BLE) transceiver in a 4G/5G LTE system. For the optimal LC-based DCO layout, three different layouts, including different gm cell locations and an Al metal layer, were implemented, and performance was compared and verified for BLE application. The implemented neck DCO (NDCO), where the gm cell is located in the neck of the main inductor, showed superior performance compared to other layouts in terms of low phase noise and low power consumption. The designed NDCO had a low phase noise of −116.1 dBc/Hz at 1 MHz with a 0.5 mW power consumption. The supply voltage and oscillation frequency range were 0.8 V and 4.7–5.7 GHz, respectively, and the NDCO designed with the optimal layout had a good figure-of-merit of −192.6 dBc/Hz.