The sorption capacity and affinity of biochar for metals are both important attributes that determine biochar’s suitability as a soil amendment for contaminant mitigation, yet few analyses have considered both characteristics simultaneously. We present a systematic review of literature published between 2010 and 2018 to test the hypothesis that sorption capacity and affinity are affected by biochar properties, attributes of the metal contaminant, and experimental conditions, in that order. We used random forest (RF) and multi-objective optimization to analyze data of 559 individual Langmuir adsorption isotherms extracted from 133 studies covering the sorption capacity (Cmax) and affinity (KL) of biochar for 17 different metals, elaborated from six different feedstock classes, three different types of feedstock pretreatment, and five types of post-pyrolysis treatment. Highest sorption values were obtained for Pb(II), Cr(IV), and Cd(II). The feedstock used was the key determinant influencing biochar’s capacity and affinity to sorb metal contaminants (first and fourth most important variable in RF models for Cmax and KL, respectively) with best results obtained for biochar elaborated from nutrient-dense feedstocks (animal biowaste, sludge, and manure). Biochars that had both high sorption capacity and affinity were the result of a longer duration of pyrolysis; they had lower C and higher N and O content, as well as lower C/N and higher O/C and H/C ratios, higher pore volumes and higher pH. Applying some form of pretreatment was better than none, whereas chemical modification was the best of the post-treatment methods analyzed. This review demonstrates clearly that multiple parameters during the preparation process influence the effectiveness of biochar to immobilize metal contaminants. Future research that focuses on mechanisms and the underlying factors for the correlations observed should allow the development of biochar formulations that are even more effective at immobilizing metal contaminants in soils and sediments.
In Southern Patagonia, a long-term monitoring network has been established to assess bio-indicators as an early warning of environmental changes due to climate change and human activities. Soil organic carbon (SOC) content in rangelands provides a range of important ecosystem services and supports the capacity of the land to sustain plant and animal productivity. The objectives in this study were to model SOC (30 cm) stocks at a regional scale using climatic, topographic and vegetation variables, and to establish a baseline that can be used as an indicator of rangeland condition. For modelling, we used a stepwise multiple regression to identify variables that explain SOC variation at the landscape scale. With the SOC model, we obtained a SOC map for the entire Santa Cruz province, where the variables derived from the multiple linear regression models were integrated into a geographic information system (GIS). SOC stock to 30 cm ranged from 1.38 to 32.63 kg C m−2. The fitted model explained 76.4% of SOC variation using as independent variables isothermality, precipitation seasonality and vegetation cover expressed as a normalized difference vegetation index. The SOC map discriminated in three categories (low, medium, high) determined patterns among environmental and land use variables. For example, SOC decreased with desertification due to erosion processes. The understanding and mapping of SOC in Patagonia contributes as a bridge across main issues such as climate change, desertification and biodiversity conservation.
Soil total nitrogen (N) stock in rangelands, shrublands, and forests support key ecological functions such as the capacity of the land to sustain plant and animal productivity and ecosystem services. The objective of this study was to model soil total N stocks and soil C/N ratio from 0–30 cm depth across the region using freely accessible information on topography, climate, and vegetation with a view to establishing a baseline against which sustainable land management practices can be evaluated in Southern Patagonia. We used stepwise multiple regression to determine which independent variables best explained soil total N variation across the landscape in Southern Patagonia. We then used multiple regression models to upscale and produce maps of soil total N and C/N across the Santa Cruz province. Soil total N stock to 30 cm ranged from 0.13 to 2.21 kg N m−2, and soil C/N ratios ranged from 4.5 to 26.8. The model for variation of soil total N stock explained 88% of the variance on the data and the most powerful predictor variables were: isothermality, elevation, and vegetation cover (normalized difference vegetation index (NDVI)). Soil total N and soil C/N ratios were allocated to three categories (low, medium, high) and these three levels were used to map the variation of soil total N and soil C/N ratios across Southern Patagonia. The results demonstrate that soil total N decreases as desertification increases, probably due to erosional processes, and that soil C/N is lower at low temperatures and increased with increasing precipitation. Soil total N and soil C/N ratios are critical variables that determine system capacity for productivity, especially the provisioning ecosystem services, and can serve as baselines against which efforts to adopt more sustainable land management practices in Patagonia can be assessed.
24 July 2020 in Mitigation and Adaptation Strategies for Global Change
Natural steppe grasslands are the principal food resource for sheep in the Patagonia region, reared for meat and wool. However, there is currently a concern about the relationship between ruminant livestock and climate change due to its contribution to anthropogenic greenhouse gas (GHG) emissions. The objective of this study was to determine the carbon footprints (CF) of sheep meat (lamb) and wool on a range of farms using empirical data collected on farm and then upscaled to the regional scale using models that use topographic, climatic, and vegetation indices as independent variables. At the regional level, the total CF of lamb and wool (the combination of emissions produced on farm, via transport, and via industrial processing) varied from 10.64 to 41.32 kg CO2-eq/kg for lamb meat (carcass) and from 7.83 to 18.70 kg CO2-eq/kg for fine-grade wool. For both, the predominant contribution was from primary production on-farm (75–90%), followed by industrial processing (2–15%), and transportation. We used multiple regression models to produce maps of lamb and wool CF at farm gate across Santa Cruz province. The model for variation of lamb CF explained 95% of the variance on the data and the most significant predictor variables were temperature seasonality and normalized difference vegetation index (NDVI, dimensionless). The most important variables for the model of CF of greasy wool production at farm gate were isothermality, temperature seasonality, and NDVI explained 98%. The lowest CF values of both products (lamb and wool) were located in more productive grasslands. The successful management of livestock GHG emissions becomes an important challenge to the scientific, commercial, and policy communities. The results of CF for lamb and wool production found in the present work assist in characterizing the greenhouse gas emissions profile of livestock products in Southern Patagonia by providing a baseline against which mitigation actions can be planned and progress monitored.