In conventional passive radio frequency identification (RFID) systems, downlink (reader to tag) and uplink (tag to reader) overlap on the same carrier frequency, which leads to severe self-jamming and reader collision problems. To resolve these issues, nonlinearity in passive RFID tags can be exploited to generate second or higher order harmonics for uplink data communication. The design of harmonic tag that allows efficient energy harvesting and harmonic generation at the same time is critical. We present Harmonic-WISP, the first harmonic RFID system integrated with the open-source wireless identification and sensing platform (WISP). Harmonic-WISP adopts a new routing strategy to ensure full power utilization in both energy harvesting and harmonic generation modes. The new platform can fundamentally eliminate self-jamming issues and can greatly reduce reader-to-reader interference. By integrating with WISP, the proposed platform can further allow flexible implementation and evaluation of efficient multiplexing and security protocols.
1 March 2017 in IEEE Journal of Radio Frequency Identification
In conventional passive UHF radio frequency identification (RFID) systems, time-division multiple access (TDMA) protocols are designed to counter inter-tag collision and multi-path interference for digital ID retrieval. However, high-accuracy (centimeter-level and below) localization to track multiple tags simultaneously still awaits a feasible solution. Overlap on the same carrier frequency of the downlink (from the reader to tags) and uplink (from tags to the reader) leads to severe self-jamming and reader collision, which makes tag localization especially difficult. The present narrow bandwidth also limits the localization accuracy and reliability. Starting from the polling process and synchronization by TDMA, we propose the code division multiple access within the broadband harmonic backscatter RFID system to enable the simultaneous real-time (15 Hz) tag localization with centimeter accuracy and millimeter deviation. We investigate the impacts of the number of tags with respect to the sampling rate, tag power consumption, and locating errors originated from the inter-tag collision, and then present an experimental prototype for verification.
Systolic and diastolic blood pressure estimation using arm-cuff monitors is one of the most common cardiovascular evaluation criteria in healthcare today, however these measures lack critical heartbeat and pressure dynamics. Pulse-transit time can be used as an alternative for arm-cuff monitors, but gives only one parameter for two pressure quantities. Ultrasound, computed tomography scan, and magnetic resonance imaging can retrieve geometrical features of the heart, but cannot directly estimate vascular pressures. Here we show a novel radio-frequency heartbeat sensor based on multi-point near-field observation. By comparing to synchronized electrocardiogram and auscultation, the multi-point sensor can assess motion and pressure in different parts of the heart following the Wiggers diagram. By applying the Hilbert-Huang frequency-time transform, the central blood pressure can be derived from the vascular vibration characteristics as continuous transients, including during the pulmonary cycle which is previously inaccessible from branchial measurements. Our scheme can be further extended to a full multiple-input-multiple-output (MIMO) channel arrangement, producing rich content for diagnostic and biometric applications. We employ dynamic time warping analyses to illustrate the sensor’s wealth of diversified information across different channels and persons. This new multi-point sensor, which can be worn conveniently over clothing, enables unprecedented monitoring capabilities of detailed central blood pressure transients and heartbeat dynamics under the given measurement instructions for at-home and clinical cardiovascular diagnostics.