A novel breathable piezoelectric membrane has been developed by growing zinc oxide (ZnO) nanorods on the surface of electrospun poly(vinylidene fluoride) (PVDF) nanofibers using a low-temperature hydrothermal method. Significant improvement in the piezoelectric response of the PVDF membrane was achieved without compromising breathability and flexibility. PVDF is one of the most frequently used piezoelectric polymers due to its high durability and reasonable piezoelectric coefficient values. However, further enhancement of its piezoelectric response is highly desirable for sensor and energy-harvester applications. Previous studies have demonstrated that piezoelectric ceramic and polymer composites can have remarkable piezoelectric properties and flexibility. However, devices made of such composites lack breathability and some present health risks in wearable applications for containing heavy metals. Unlike other piezoelectric ceramics, ZnO is non-toxic material and has been widely used in many applications including cosmetics. The fabrication of ZnO@PVDF porous electrospun membrane involves a simple low-temperature ZnO growth in aqueous solution, which does not weaken the polarization of PVDF created during electrospinning in the high electric field.
Many health diagnostic systems demand noninvasive sensing of respiratory rate, respiratory volume, and heart rate with high user comfort. Previous methods often require multiple sensors, including skin-touch electrodes, tension belts, or nearby off-the-body readers, and hence are uncomfortable or inconvenient. This paper presents an over-clothing wearable radio-frequency sensor study, conducted on 20 healthy participants (14 females) performing voluntary breathing exercises in various postures. Two prototype sensors were placed on the participants, one close to the heart and the other below the xiphoid process to couple to the motion from heart, lungs and diaphragm, by the near-field coherent sensing principle. We can achieve a satisfactory correlation of our sensor with the reference devices for the three vital signs: heart rate (r = 0.95), respiratory rate (r = 0.93) and respiratory volume (r = 0.84). We also detected voluntary breath-hold periods with an accuracy of 96%. Further, the participants performed a breathing exercise by contracting abdomen inwards while holding breath, leading to paradoxical outward thorax motion under the isovolumetric condition, which was detected with an accuracy of 83%.
In conventional passive radio frequency identification (RFID) systems, downlink (reader to tag) and uplink (tag to reader) overlap on the same carrier frequency, which leads to severe self-jamming and reader collision problems. To resolve these issues, nonlinearity in passive RFID tags can be exploited to generate second or higher order harmonics for uplink data communication. The design of harmonic tag that allows efficient energy harvesting and harmonic generation at the same time is critical. We present Harmonic-WISP, the first harmonic RFID system integrated with the open-source wireless identification and sensing platform (WISP). Harmonic-WISP adopts a new routing strategy to ensure full power utilization in both energy harvesting and harmonic generation modes. The new platform can fundamentally eliminate self-jamming issues and can greatly reduce reader-to-reader interference. By integrating with WISP, the proposed platform can further allow flexible implementation and evaluation of efficient multiplexing and security protocols.
8 February 2021 in IEEE Transactions on Microwave Theory and Techniques
The near-field coherent sensing (NCS) system can detect weak cyclic motion inside living bodies, such as human wrist pulses and the heartbeat of small animals. To couple significant energy to the motion source, a GHz RF carrier was employed, where the vibration amplitude was often much smaller than the wavelength. To optimize the signal quality, we presented a small-signal model with nonlinearity analysis by Jacobi-Anger expansion. The quiescent-point determination and signal composition were then discussed to guide the hardware and algorithm design. The model was validated by electromagnetic simulation in CST Studio and a simple robotic platform. A novel algorithm of adaptive control by signal injection was applied to boost both the signal magnitude and data converter utilization. The signal-to-quantization-noise ratio (SQNR) is improved by 35 dB and signal-to-noise ratio (SNR) by more than 10 dB. Sensing of vocal cord vibration was demonstrated as a potential application, where a harmonic radio frequency identification (RFID) system was chosen for its low noise floor to achieve high-fidelity recording of music scales and procedure words.