In this paper, the performance of a lightning protection system (LPS) on a grid-connected photovoltaic (PV) park is studied by simulating different scenarios with the use of an appropriate software tool. The aim of this paper is to highlight the importance of an LPS and optimize its design for the protection of equipment and personnel in case of a direct lightning strike. In particular, developed potential due to lightning strikes is examined considering isolated and non-isolated external LPS. Moreover, the effect of the separation distance on the lightning performance of the PV installation is investigated for different soil structures and grounding systems. The extracted results are expected to support the design and implementation of a secure PV park and endorse its uninterrupted operation considering techno-economically balanced protection measures.

This paper describes in detail a step-by-step methodology for obtaining specimens from the housing material (high temperature vulcanized (HTV) silicone rubber with aluminum trihydrate (ATH) filler) of composite insulators (finished products), for five well known and commonly used tests. The aim of the paper is to render practical clarifications and additions to the instructions for five tests on composite insulators provided by international standards. Additionally, the ranges of the results of these tests are presented. More specifically, shore A hardness measurement, tensile strength and elongation at break test, tear strength test, density measurement and inclined plane test were conducted on the housing material of ten, new, unaged medium voltage composite insulators made by six different manufacturers. The results of these tests are presented as a contribution to the existing knowledge and a comparative study of corresponding results of previous investigations is performed. The presented procedures for specimens’ preparation, as well as the results (arithmetical ranges), could be used as guidelines for future testing on the housing material (HTV silicone rubber with ATH filler) of composite insulators, either by researchers and manufacturers, during laboratory testing and material development processes, or by customers (distribution and transmission networks owners), during batch acceptance tests.