Ali Alzaed

Dr. Ali Alzaed


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 July 2022 in Buildings
Verified
Journal Article
Open access
PDF file
Maria GhufranMaria Ghufran
Maria Ghufran
Khurram Iqbal Ahmad KhanKhurram Iqbal Ahmad Khan
Khurram Iqbal Ahmad Khan
Fahim UllahFahim Ullah
Fahim Ullah
ANAbdur Rehman Nasir
Abdur Rehman Nasir
AAAhmad Aziz Al Ahmadi
Ahmad Aziz Al Ahmadi
Mamdooh AlwetaishiMamdooh Alwetaishi
Mamdooh Alwetaishi
Construction is a resource-intensive industry where a circular economy (CE) is essential to minimize global impacts and conserve natural resources. A CE achieves long-term sustainability by enabling materials to circulate along the critical supply chains. Accordingly, recent research has proposed a paradigm shift towards CE-based sustainability. However, uncertainties caused by fluctuating raw material prices, scarce materials, increasing demand, consumers’ expectations, lack of proper waste infrastructure, and the use of wrong recycling technologies all lead to complexities in the construction industry (CI). This research paper aims to determine the enablers of a CE for sustainable development in the CI. The system dynamics (SD) approach is utilized for modeling and simulation purposes to address the associated process complexity. First, using content analysis of pertinent literature, ten enablers of a CE for sustainable development in CI were identified. Then, causality among these enablers was identified via interviews and questionnaire surveys, leading to the development of the causal loop diagram (CLD) using systems thinking. The CLD for the 10 shortlisted enablers shows five reinforcing loops and one balancing loop. Furthermore, the CLD was used to develop an SD model with two stocks: “Organizational Incentive Schemes” and “Policy Support.” An additional stock (“Sustainable Development”) was created to determine the combined effect of all stocks. The model was simulated for five years. The findings show that policy support and organizational incentive schemes, among other enablers, are critical in implementing a CE for sustainable development in CI. The outcomes of this study can help CI practitioners to implement a CE in a way that drives innovation, boosts economic growth, and improves competitiveness.

24 July 2021 in Processes
Verified
Journal Article
Open access
PDF file
YKYacine Khetib
Yacine Khetib
AAAhmad Aziz Al Ahmadi
Ahmad Aziz Al Ahmadi
AAAli Alzaed
Ali Alzaed
ATAhamd Tahmasebi
Ahamd Tahmasebi
Mohsen SharifpurMohsen Sharifpur
Mohsen Sharifpur
Goshtasp CheraghianGoshtasp Cheraghian
Goshtasp Cheraghian
The authors of the present paper sought to conduct a numerical study on the convection heat transfer, along with the radiation and entropy generation (EGE) of a nanofluids (NFs) in a two and three-dimensional square enclosure, by using the FVM. The enclosure contained a high-temperature blade in the form of a vertical elliptical quadrant in the lower corner of the enclosure. The right edge of the enclosure was kept at low temperature, while the other edges were insulated. The enclosure was subjected to a magnetic field (MGF) and could be adjusted to different angles. In this research, two laboratory relationships dependent on temperature and volume fraction were used to simulate thermal conductivity and viscosity. The variables of this problem were Ra, Ha, RAP, nanoparticle (NP) volume fraction, blade aspect ratio, enclosure angles, and MGF. Evaluating the effects of these variables on heat transfer rate (HTR), EGE, and Be revealed that increasing the Ra and reducing the Ha could increase the HTR and EGE. On the other hand, adding radiation HTR to the enclosure increased the overall HTR. Moreover, an augmentation of the volume fraction of magnesium oxide NPs led to an increased amount of HTR and EGE. Furthermore, any changes to the MGF and the enclosure angle imposed various effects on the HTR. The results indicated that an augmentation of the size of the blade increased and then decreased the HTR and the generated entropy. Finally, increasing the blade always increased the Be.

20 October 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
Younes SahriYounes Sahri
Younes Sahri
TSTAMALOUZT Salah
TAMALOUZT Salah
SLSofia Belaid Lalouni
Sofia Belaid Lalouni
Seddik BachaSeddik Bacha
Seddik Bacha
NUNasim Ullah
Nasim Ullah
AAAli Alzaed
Ali Alzaed
A wind turbine (WT)-based doubly fed induction generator (DFIG) is the most often used generator in the wind conversion system market due to its advantages such as the ability of operating under variable wind speed and its high performance. However, nonlinear dynamical and parameter uncertainties of the DFIG make the controller design of this kind of system a challenging work. Thus, in this study, a novel control strategy was proposed to design the desired system dynamics, to highlight the efficacy of the proposed system, and to improve the performance of the closed-loop system. The proposed controller combines the twelve-sector direct torque control (12-DTC) and the fuzzy controller with modified rules to solve the limitations and shortcomings of the usual methods for the WT-DFIG system. All operation modes, successively and continually, were considered to reflect the true operation of WT-DFIG system subject to random wind speeds. The aims of this work was to ensure an optimal operation of the wind generator, extracting maximum power in the zone II of the WT characteristic, and limiting this power in its maximum value in the case (zone III), to transmit the power generated by the DFIG to the grid-side with minimum losses in the disturbances related to DFIG. Extensive numerical simulations were performed under MATALB/Simulink, where the proposed fuzzy twelve direct torque control (F12-DTC) was compared with conventional nonlinear controls: conventional DTC (C-DTC) and 12-DTC. The simulation results demonstrated clearly that the proposed one had the highest performance and robustness, with a significant reduction in rotor flux and electromagnetic torque ripples and better-generated power quality with low currents’ THD over the conventional strategies (C-DTC and 12-DTC).

31 March 2021 in Sensors
Verified
Journal Article
Open access
PDF file
Yasir MehmoodYasir Mehmood
Yasir Mehmood
JAJawad Aslam
Jawad Aslam
NUNasim Ullah
Nasim Ullah
SCShahariar Chowdhury
Shahariar Chowdhury
KTKuaanan Techato
Kuaanan Techato
AAAli Alzaed
Ali Alzaed
Recently, formation flying of multiple unmanned aerial vehicles (UAVs) found numerous applications in various areas such as surveillance, industrial automation and disaster management. The accuracy and reliability for performing group tasks by multiple UAVs is highly dependent on the applied control strategy. The formation and trajectories of multiple UAVs are governed by two separate controllers, namely formation and trajectory tracking controllers respectively. In presence of environmental effects, disturbances due to wind and parametric uncertainties, the controller design process is a challenging task. This article proposes a robust adaptive formation and trajectory tacking control of multiple quad-rotor UAVs using super twisting sliding mode control method. In the proposed design, Lyapunov function-based adaptive disturbance estimators are used to compensate for the effects of external disturbances and parametric uncertainties. The stability of the proposed controllers is guaranteed using Lyapunov theorems. Two variants of the control schemes, namely fixed gain super twisting SMC (STSMC) and adaptive super twisting SMC (ASTSMC) are tested using numerical simulations performed in MATLAB/Simulink. From the results presented, it is verified that in presence of disturbances, the proposed ASTSMC controller exhibits enhanced robustness as compared to the fixed gain STSMC.

16 November 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
KAKHALID ANSARI
KHALID ANSARI
ASAvinash Shrikhande
Avinash Shrikhande
MMMohammad Abdul Malik
Mohammad Abdul Malik
AAAhmad Aziz Al Ahmadi
Ahmad Aziz Al Ahmadi
Mamdooh AlwetaishiMamdooh Alwetaishi
Mamdooh Alwetaishi
Ahmed ElbeltagiAhmed Elbeltagi
Ahmed Elbeltagi
Greywater is the most sustainable option to address the growing need for fresh water. This study aimed to identify the optimal operation variables of an electro-coagulation filtration (ECF) system for treating domestic greywater, using different conditions (e.g., different electrode combinations (Al-Fe-Al-Fe), initial pH (6.8–8.4), operating time (10–60 min), and voltage (6–24 volts)). A statistical data analysis was performed to evaluate the experimental conditions for modeling the chemical oxygen demand (COD), the total dissolved solids (TDSs), turbidity, and chloride removal effectiveness, almost ranging from (85 to 94%), respectively, with energy consumption using the response surface methodology (RSM) and the ANOVA test. When comparing the experimental and predicted model values, it was proved that the model fairly describes the experimental values with the R2 values determined >0.99 for COD, TDSs, turbidity, chloride, and energy consumption, suggesting a regression sustainability of the model. The sludge properties were characterized using scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and FTIR spectroscopy, which indicated the removal of organic matter during the ECF, similar in composition, independently of the different applied voltage values used. The results of this study suggest the ECF significantly reduces the pollutants load in greywater, showing the aluminum-iron-based electrodes as a viable option to treat greywater with optimal operational costs ranging from (0.12 to 0.4) US$ m−3 under different voltage conditions and parameters. This study establishes a path for greywater treatment technology that is economical and environmentally responsible for wastewater management that leads to sustainability.

20 July 2021 in Processes
Verified
Journal Article
Open access
PDF file
YKYacine Khetib
Yacine Khetib
AAAhmad Aziz Al Ahmadi
Ahmad Aziz Al Ahmadi
AAAli Alzaed
Ali Alzaed
ATAhamd Tahmasebi
Ahamd Tahmasebi
Mohsen SharifpurMohsen Sharifpur
Mohsen Sharifpur
Goshtasp CheraghianGoshtasp Cheraghian
Goshtasp Cheraghian
In the current numerical study, various wall shape effects are investigated on the thermal-hydraulic characteristics of different channels filled with water-based graphite-SiO2 hybrid nanofluid. In this work, the performance evaluation criteria (PEC) index is employed as the target parameter to attain optimum geometry. Six different cases are studied in this research, and each case has different geometrical dimensions. The inlet temperature for the fluids in the channel is 300 K, over a range of different flow velocities. According to the obtained results, an increase in the volume fraction of nanoparticles results in higher PEC values. In addition, an increase in Reynolds number to Re = leads to an increase in the PEC index. The results clearly show that increasing the Reynolds number has two consequences: on the one hand, it increases the pressure drop penalty; on the other hand, it improves heat transfer. Therefore, the maximum value of the PEC index occurs at Re = 15,000.