Microbial induced calcite precipitation (MICP) is one of the potential methods for improvement of engineering properties of soil. A laboratory study was conducted to investigate the influence of various factors on engineering properties of MICP-treated soil catalyzed by bacteria and ureases. Some of these factors include bacteria concentration, urease concentration, cementation media concentration, reaction time, type of sand, and curing conditions. The experiments of MICP catalyzed by Sporosarcina pasteurii and urease were conducted in similar conditions. The soil samples were prepared with full contact flexible molds (FCFMs). The results of unconfined compression test show that the experimental factors (bacteria/urease concentration, cementation media concentration, reaction time, and type of sand) have a significant impact on the MICP process and engineering properties of sand treated by both bacteria and urease, whereas the curing conditions has a small effect. The unconfined compression strength (approximately 1.76–2.04 MPa) of bacteria treated samples is almost $5\times$ (approximately 0.33–0.43 MPa) that of urease treated samples under similar urease activity. The MICP process catalyzed by bacteria is much more effective than the process catalyzed by urease in terms of engineering soil properties improvement.

Microbial-induced calcite precipitation (MICP) is one of the environmentally friendly ways to improve engineering properties of sandy soil. A laboratory study was conducted to investigate the effect of randomly distributed discrete fiber on the mechanical properties of MICP-treated soil and to discover the corresponding mechanisms. Specimens were prepared at four different fiber ratios (0.1, 0.2, 0.3, and 0.4% by weight of sand). MICP were catalyzed by Sporosarcina pasteurii at the concentration of 4.3×107 cells/mL. MICP-treated sand samples were prepared using full-contact flexible molds. The results showed that remarkable improvements in shear strength, ductility, and failure strain were achieved with fiber addition in the MICP-treated sand. The unconfined compression strength (UCS) and shear strength increased gradually with an increase in fiber content up to a fiber content of 0.3%. The optimum fiber content in the MICP-treated sand was found to be 0.2–0.3%. The UCS of MICP-treated sand at th...

Most microbially induced calcite precipitation (MICP) processes are induced by aerobic bacteria; thus, oxygen availability plays an important role in MICP treatment. To determine the effects of oxygen supply on MICP treatment catalyzed by Sporosarcina pasteurii, contrast tests under an aerated condition, air-restricted condition, and open air condition were conducted. The results showed that dissolved oxygen (DO) in the air-restricted reactor decreased with time and was almost exhausted within 7 days; DO in the open box decreased by 50% after 7 days of treatment because of the superficial air supply; and DO in the aerated box maintained an initial high level because the consumed oxygen was supplied immediately by adequate air bubbles in the treatment solution. Unconfined compressive strength (UCS) and CaCO₃ content are high under the aerated condition, moderate under the open condition, and poor under the air-restricted condition. The UCS can be 100 times different depending on the different oxygen supply conditions. The overall influence process is as follows: oxygen is dissolved to supply DO for life and activity of the aerobic urea hydrolysis bacteria; then, urea is hydrolyzed to carbonate anions for CaCO₃ precipitation in the presence of Ca²⁺; and finally, CaCO₃ precipitation results in the strengthening of sand. The results indicate that a sufficient air supply is essential to improve MICP processes catalyzed by aerobic bacteria.

Plant urease has the advantages of high activity and small size in enzyme-induced calcium carbonate precipitation (EICP). However, there area lack of nucleation sites for calcium carbonate in EICP. Sucrose and sorbitol, which are readily available and inexpensive, have the potential to provide nucleation sites for EICP as nucleating agents. To explore the effects of the two nucleating agents on EICP, the productivity of calcium carbonate, unconfined compressive strength (UCS) and microscopic mechanisms were tested. It is found that the productivity of EICP can be increased as much as 5.1% by the addition of sorbitol with an optimal content of 5%, and the productivity of EICP can be increased as much as 12.3% by the addition of sucrose with an optimal of 4%. The UCS of EICP-treated sand increases by 2.2 times after being improved by sorbitol with a content of 5.2%, the CaCO₃ content of EICP-treated sand with sorbitol added increased by 1.5% compared to conventional EICP-treated sand. These results show that the two nucleating agents are effective for improving EICP. The SEM images verify that sorbitol/sucrose can compensate for the lack of nucleating sites in EICP and explicate the effect of nucleating agents on EICP.