One promising way to store and distribute large amounts of renewable energy is water electrolysis, coupled with transport of hydrogen in the gas grid and storage in tanks and caverns. The intermittent availability of renewal energy makes it difficult to integrate it with established alkaline water electrolysis technology. Proton exchange membrane (PEM) water electrolysis (PEMEC) is promising, but limited by the necessity to use expensive platinum and iridium catalysts. The expected solution is anion exchange membrane (AEM) water electrolysis, which combines the use of cheap and abundant catalyst materials with the advantages of PEM water electrolysis, namely, a low foot print, large operational capacity, and fast response to changing operating conditions. The key component for AEM water electrolysis is a cheap, stable, gas tight and highly hydroxide conductive polymeric AEM. Here, we present target values and technical requirements for AEMs, discuss the chemical structures involved and the related degradation pathways, give an overview over the most prominent and promising commercial AEMs (Fumatech Fumasep® FAA3, Tokuyama A201, Ionomr Aemion™, Dioxide materials Sustainion®, and membranes commercialized by Orion Polymer), and review their properties and performances of water electrolyzers using these membranes.

The separator is a critical component for the performance of alkaline water electrolysis as it ensures the ionic contact between the electrodes and prevents the product gases from mixing. While the ionic conductivity of the separator affects the cell voltage, the permeability of the dissolved product gases influences the product gas impurity. Currently, diaphragms are used as separators, the pore system of which is filled with the electrolyte solution to enable the exchange of ions. The breakthrough of the gas phase can be prevented up to a specific differential pressure. A drawback of diaphragms is the requirement of a highly concentrated electrolyte solution to maintain a high ionic conductivity. The usage of anion-exchange membranes could solve this problem. However, the long-term stability of such materials remains unproven. This study compares two pre-commercial diaphragms, an anion-exchange membrane, and an ion-solvating membrane with the state-of-the-art diaphragm Zirfon^TM Perl UTP 500. Besides physical characterization, the material samples were evaluated electrochemically to determine the ohmic resistance and the product gas impurities. The results show that the thinner diaphragm outperforms the reference material and that polymer membranes can compete with the performance of the reference material.

Charge-transfer process (CTP) and mass-transfer process (MTP) are essential in water electrolysis. The engineered core@shell nanoarrays-based anode can significantly improve not only CTP but also MTP in AWE cell.