Ship recycling is gaining attention in Indonesia due to the increase in end-of-life ships and uneconomical nationally flagged ships, and is considered a prospective source of economic development and employment opportunity, and yet conceivably poses a threat to the health and safety of workers and the environment. There are international and national regulations that govern ship-recycling activities to ensure that the hazardous impacts of the industry are minimized. We investigated the disparity between current ship-breaking practices in Indonesia and the requirements of related international and national regulations, with the findings intended for use as a stepping stone to proposing a strategy to establish a green and sustainable ship-recycling industry. A benchmark study of the world’s leading ship-recycling countries was conducted, and a gap analysis was performed by comparing existing international and national regulations with current ship-breaking practices in Indonesia. We identified two types of ship-breaking practices in Indonesia: Conventional environmentally unfriendly ship-breaking method, conducted by most Indonesian ship-breaking yards, and a rather modern, more environmentally friendly method, conducted by ship-repair yards. However, neither of the practices met the requirements of the regulations, and improvements are therefore needed to make the ship-recycling industry more green and sustainable, and to gain international recognition.

In order to introduce clean environment and sustainable energy to traditional coastal fishing community, the objective of this study is to encourage the Indonesian traditional coastal fishing community to use green and renewable energy in their fishing activities. Introducing solar power as the main source of energy for fish-attracting lights and boat propulsion can reduce the use of fossil fuels, and sustain clean and healthy environment. As the world’s largest archipelago, Indonesia accounts for a high percentage of traditional fishing communities spread out along its islands. This fishing communities use various traditional fishing boats, and platforms. The fishing platforms are usually made of bamboo and placed on top of supporting structures on the seabed. Diesel electric generators are used to obtain electricity needed for lighting to attract the fish at night, and as the source of power for lifting the fishing net. The structure and fuel used are neither environmentally friendly nor clean; thus, an innovation is introduced. Traditional fishing practices using a fishing platform were studied, including the common size of the platform and the power needed for the fishing light. Based on the gathered information, this study proposes a catamaran vessel with a special top structure designed for fish lifting outfitting, and equipped with photovoltaic solar cells as the energy source for the fishing lights and vessel propulsion. Through this innovative break through, the vessel can be moved to the shore and will not be a threat to ship navigation and the environment. Furthemore, powered by clean and sustainable energy, the vessel can be directed to the best fishing ground.

This paper analyses factors that might cause accidents to the container ships due to containers stacked on deck, and propose applicable actions to minimize these factors. The number, capacity, and speed of hatch-coverless container ships worldwide have increased significantly since the latest decade due to the increase of world trade. There is also a trend of stacking more containers on deck in order to increase the capacity of the ships. This phenomenon makes the number of container ship accidents also increasing; particularly capsize or sink. Even though merchant ships have to comply with safety rules and regulations, but the number of accidents still significantly high. The accidents usually cause great loses to the cargo and damage the overall logistic system. The sources of container ship accidents can be categorized into the ship itself, the environment, human factor, and management. In this study, accidents data and related information were gathered through literature study, on the spot observation, and direct interviews with relevant parties. Causes of accidents were then identified using cause and effect analysis. Based on the findings from the analysis, options for overcoming them were simulated to obtain the most applicable solutions that would minimize the accidents.

Indonesian government has a flagship program that is to promote the nation through the maritime sector and make Indonesia as Global Maritime Fulcrum. To achieve that, sea transportation is very important for the development of Indonesia. But sea transportation is also the highest contributor to the air pollution and global warming. In order to reduce the source of global warming Indonesian Government has a strategic plan to gradually replace the use of fossil energy with renewable energy. One of the renewable energy that can be used effectively in Indonesia is solar energy, because Indonesia located along the equator and has a high intensity of sunlight that means it has excellent solar energy availability. In attempt to contribute to the Government's energy strategic plan, the research is aimed to design a solar-powered electric boat with single pilot. The project is a further development of the solar boat created by the Universitas Indonesia team that participated in the International Solar-boat Challenge competition in the Netherlands. The paper is focused on the design and calculation of its mechanical system. The system is divided into propulsion system, steering system, and bilge pump system. The research is conducted based on literature study, discussion with experts, and surveys to the solar-powered electric boat had been designed previously for the race. Collected data are then used as input for the calculation and simulation of the vessel being designed. It is expected that the study could optimize the mechanical system of the solar-powered electric boat, and can be developed for recreational use in Indonesian waters.

The study is aimed to assess the navigation safety in the port surrounding the area as part of the Indonesian Government's efforts to increase the port performance and minimize the cost of maritime logistics. The port navigation system and infrastructure such as vessels traffic management system, navigation lanes, port basin, quay, etc. play an important role in determining the productivity and efficiency of the port, especially in the busy port such as Tanjung Priok, Indonesia. Any accident would interrupt port activities and creates unnecessary costs. Formal Safety Assessment method, as introduced by the International Maritime Organization was implemented in the study. The assessment was carried out using qualitative and quantitative risks analyses, based on the available data and information gathered from various sources. It was identified that accidents occurred in the port waterfront were mainly due to the ships, environment, human factors, and management. Results of the assessment were then used as the basis for proposing an improvement strategy.

Experiments and theoretical analyses of sandwich materials which are used in the design of a solar-powered boat are required to fully complete the analysis of the hull strength. Rule analysis of global hull girder loads or panel under global loads (laminate buckling, maximum stress in each layer, and combined stress) will be used to determine the hull strength of the boat. In this research, the mechanical properties of facing laminate and sandwich material of VARTM-Vacuum Infusion are investigated. Moreover, the analysis from the result of the experiment and the theoretical calculation will be used as a reference to perform the hull strength calculations. From the experiment, an average tensile modulus of 15.21 GPa is obtained with a standard deviation of ± 1 GPa and the theoretical analyses calculation for the tensile modulus value is 54.990 5 GPa. Furthermore, an average flexural modulus value is 21 261.8 N mm^-2 with a standard deviation of ± 2 301.17 N mm^-2 and a theoretical analyses calculation for the flexural modulus value is 26 833.5 N mm^-2. In the end, the calculation from the experimental and theoretical analysis may be applicable to calculate the hull strength of the vessel. In conclusion, the calculation of the hull strength of the solar-powered boat using the Bureau Veritas (BV) classification rules has met the required standards.