Antiknock research of reinforced concrete (RC) slabs is often carried out with spherical or nearly spherical explosives, although many explosives used in engineering and military are cylinder shaped. It is known that the shock wave caused by cylindrical explosives varies in different directions, which is quite different from the spherical charge. In this paper, the shock wave propagation characteristics of spherical and cylindrical explosives with different aspect ratios are compared and analyzed. The 2D numerical results show the peak overpressure from the cylindrical explosive is significantly affected by the L/D (length/diameter) ratio. Subsequently, the damage features of RC slabs under spherical and cylindrical explosives with a certain L/D ratio are investigated through an explosion experiment. Finally, the influence of the L/D ratio on the dynamic response of RC slabs under cylindrical explosives is studied by the fully coupled Euler–Lagrange method. The accuracy and reliability of the coupled model are verified by comparing the numerical with experimental results. Based on the experimental and numerical studies, it can be concluded that the explosive shape directly determines the shape of upper surface crater damage, and the spall damage area of RC slabs becomes larger as the L/D increases. For the L/D increases to a certain value, the cylindrical explosive will induce larger spall damage than that induced by spherical charge with the same amount of explosives. Hence, the effect of the cylindrical charge should be considered in the antiknock design of the RC structure.

The stability of an arch dam can be significantly damaged by an extreme underwater explosion. This study proposed a damage index for assessing the degree of local damage of an arch dam after the dam was subjected to an underwater explosion. The damage index was applied to assess local damage at the middle part of the dam, surcharge holes, and abutment. A model was developed to evaluate the stability of the entire dam based on the spatial distribution of damage and the damage on the base interface. Results showed that local explosion damage at flood discharge holes or abutments might cause instability of the arch dam. When the contact explosion action location is on the abutment, it only needs 310 kg to cause the overall damage of the arch dam, while when the action location is on the middle part of the dam, the quantity of explosive required is 2800 kg.

During excavation of deep rock, the release of strain energy plays an important role in geologic hazards caused by excavation. However, in the previous studies, the influence of transient unloading of in situ stress caused by blasting excavation has been ignored, and the blasting excavation of a tunnel is regarded as a single blast process. In this paper, the dynamic adjustment process of strain energy and the energy storage limit of surrounding rocks caused by transient unloading of in situ stress under elastic conditions were firstly analyzed. Then, the brittle-ductile-plastic transition model based on the Hoek–Brown strength criterion was simulated in FLAC3D. Finally, the dynamic release process of strain energy of surrounding rocks caused by multiple unloading disturbances was analyzed during the excavation of 2# Underground Laboratory of Jinping II Hydropower Station employing the newly proposed index, energy release coefficient (ERC). Results show that the strain energy of surrounding rock masses firstly decreases, then increases, next reduces, and finally stabilizes under the transient unloading of in situ stress. In the process of dynamic change of strain energy, when the strain energy exceeds its storage limit, a large amount of strain energy will be released and thus will lead to damage of the surrounding rock masses. Because the cut holes and the first circle of breaking holes are far away from the final excavation boundary, the unloading disturbance to the strain energy of surrounding rock masses is small. Furthermore, the energy release of surrounding rock masses is mainly caused by the unloading of the last circle of breaking holes and perimeter holes, and the closer to the final excavation boundary, the more intense the energy release.

During the process of blasting excavation of deep rock masses under high in situ stress, energy produced by the explosive and the strain energy released by rock mass excavation constitute the energy source of vibration. However, in traditional Sadov’s empirical formula, the energy produced by explosive explosion is only considered which makes the error higher when it is used to predict the blasting-induced vibration peak under the condition of high in situ stress. In this study, energy transformation and distribution mechanisms caused by excavation of deep rock masses were analyzed at first. Then, a prediction model of vibration peak based on the principle of energy balance was established by dimension analysis. Finally, the proposed model was trained and tested with the vibration data monitored during the blasting excavation of deep buried tunnel in Jinping II hydropower station. The result shows that compared with the traditional prediction model, the proposed model has higher fitting correlation coefficient and lower root-mean-square error, which can be better applied to the prediction of vibration induced by blasting excavation of deep rock masses under high in situ stress.