China is renowned for its extensive underground engineering projects and the complex geological and hydrological conditions it faces. Grouting treatment technology is widely employed in deep-buried mines and tunnels, where grouting parameters such as materials, pressure, volume, and hole arrangement significantly impact the effectiveness of grouting. This review paper comprehensively examines current research on grouting materials, theories, experiments, and numerical simulations. It summarizes the various factors that must be considered during the grouting process of fissures and explores the diffusion mechanisms of grout under their influence. Furthermore, further research is needed on the mechanisms and treatment methods for poor grouting in rock masses, the distribution patterns of fissures, optimization methods for grouting parameters, and grout quality assessment techniques. Future research should focus on developing more efficient experimental methods with higher accuracy levels while advancing grouting technologies. Establishing comprehensive and accurate rock mass models along with improving monitoring capabilities are also crucial aspects to consider. Therefore, studying the diffusion mechanisms of grout in fissured rock masses is of significant importance for the practical operation of underground engineering projects.

Antiknock research of reinforced concrete (RC) slabs is often carried out with spherical or nearly spherical explosives, although many explosives used in engineering and military are cylinder shaped. It is known that the shock wave caused by cylindrical explosives varies in different directions, which is quite different from the spherical charge. In this paper, the shock wave propagation characteristics of spherical and cylindrical explosives with different aspect ratios are compared and analyzed. The 2D numerical results show the peak overpressure from the cylindrical explosive is significantly affected by the L/D (length/diameter) ratio. Subsequently, the damage features of RC slabs under spherical and cylindrical explosives with a certain L/D ratio are investigated through an explosion experiment. Finally, the influence of the L/D ratio on the dynamic response of RC slabs under cylindrical explosives is studied by the fully coupled Euler–Lagrange method. The accuracy and reliability of the coupled model are verified by comparing the numerical with experimental results. Based on the experimental and numerical studies, it can be concluded that the explosive shape directly determines the shape of upper surface crater damage, and the spall damage area of RC slabs becomes larger as the L/D increases. For the L/D increases to a certain value, the cylindrical explosive will induce larger spall damage than that induced by spherical charge with the same amount of explosives. Hence, the effect of the cylindrical charge should be considered in the antiknock design of the RC structure.

The stability of an arch dam can be significantly damaged by an extreme underwater explosion. This study proposed a damage index for assessing the degree of local damage of an arch dam after the dam was subjected to an underwater explosion. The damage index was applied to assess local damage at the middle part of the dam, surcharge holes, and abutment. A model was developed to evaluate the stability of the entire dam based on the spatial distribution of damage and the damage on the base interface. Results showed that local explosion damage at flood discharge holes or abutments might cause instability of the arch dam. When the contact explosion action location is on the abutment, it only needs 310 kg to cause the overall damage of the arch dam, while when the action location is on the middle part of the dam, the quantity of explosive required is 2800 kg.

The defense effects of sacrificial cladding have been extensively studied in the field of blast resistance. As a polymer material with a cellular structure, polyurethane also has the potential to act as sacrificial cladding due to its good mechanical properties. The purpose of this study is to compare and select a numerical simulation method that is suitable for exploring the blast damage mitigation effect of polyurethane sacrificial cladding on reinforced concrete slabs. To this end, three numerical models were developed using the Fully Coupled Eulerian–Lagrangian (CEL) method, the Arbitrary Lagrangian–Eulerian (ALE) coupling method, and the Smoothed Particle Hydrodynamics and Finite Element Method (SPH–FEM) coupling method, respectively. These three numerical models were used to investigate the damage features of reinforced concrete slabs with polyurethane sacrificial cladding (PU–RCS) under contact explosions. A field test was also carried out to provide a comparison for numerical simulation results. Moreover, the advantages and disadvantages of the three simulation results and the applicability of the three coupled models were discussed. The results show that compared with the CEL model and the ALE coupling model, the SPH–FEM coupling model can better simulate the damage features of PU–RCS, such as the cracks on the bottom surface of the RC slab and the large deformation failure state of polyurethane sacrificial cladding, while the CEL model and the ALE coupling model can simulate the propagation process of shock waves and have a lower computational cost. In conclusion, the SPH–FEM coupling method is the most applicable method for exploring the blast damage features of PU–RCS in this study.