Joonghoon Shin

Mr. Joonghoon Shin

National Institute of Forest Science, Rep. of KOREA
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 August 2016 in Canadian Journal of Remote Sensing
Verified
Journal Article
Closed access
JSJoonghoon Shin
Joonghoon Shin
THTemesgen Hailemariam
Temesgen Hailemariam
JSJacob Strunk
Jacob Strunk
THThomas Hilker
Thomas Hilker
Selected modeling methods are compared for predicting 5 forest attributes, basal area (BA), stem volume (VOL), Lorey's height (LOR), quadratic mean diameter (QMD), and tree density (DEN), from airborne LiDAR metrics in southwestern Oregon, in the United States. The selected methods included most similar neighbor (MSN) imputation, gradient nearest neighbor (GNN) imputation, Random Forest (RF)–based imputation, BestNN imputation, ordinary least square (OLS) regression, spatial linear model (SLM), and geographically weighted regression (GWR). Several performances of each method were assessed by 500 simulations with different numbers of training data. No single modeling method was always superior to the others in prediction of the forest attributes. The best method varied according to response variable, prediction type, and performance measures, even though there was a leading group (SLM, OLS, BestNN, and GWR) that always outperformed the other methods in root mean squared prediction error (RMSPE). The model's performance was quite affected when the number of training data used in the modeling procedure was small. The optimal sizes of training data were 100–150 for point prediction and 200–250 for total prediction. SLM showed its applicability to wider conditions in that it produced better performance in most cases. RF imputation produced poorer performances than the other methods, particularly with lower prediction interval coverage. This might be because RF imputation had some bias and a smaller prediction standard error; the poor performance by RF did not stem from the smaller number of predictor variables. Résumé. Des méthodes de modélisation choisies sont comparées pour prédire 5 attributs de la forêt, la surface terrière (BA), le volume de la tige (VOL), la hauteur de Lorey (LOR), le diamètre de la tige de surface terrière moyenne (QMD) et la densité des arbres (DEN), à partir de mesures LiDAR aéroporté dans le sud-ouest de l'Oregon, aux États-Unis. Les méthodes choisies ont inclus l'imputation du voisin le plus similaire (most similar neighbor; MSN), l'imputation du gradient du plus proche voisin (gradient nearest neighbor; GNN), l'imputation basée sur les forêts d'arbres décisionnels (Random Forest; RF), l'imputation BestNN, la régression de la méthode des moindres carrés ordinaire (ordinary least square; OLS), le modèle spatial linéaire (spatial linear model; SLM), et la régression géographiquement pondérée (geographically weighted regression; GWR). Plusieurs essais de chaque méthode ont été évalués par 500 simulations avec des nombres différents de données d'apprentissage. Aucune méthode de modélisation ne fut toujours supérieure aux autres dans la prédiction des attributs forestiers. La meilleure méthode a varié selon la variable de réponse, le type de prédiction et les mesures de performance, même s'il y avait un meilleur groupe de méthodes (SLM, OLS, BestNN, et GWR) qui a toujours mieux performé que les autres en ce qui concerne l'erreur quadratique moyenne de prévision (RMSPE). La performance du modèle a été fortement affectée quand seulement un petit nombre de données d'apprentissage a été utilisé dans la procédure de modélisation. Les nombres optimaux de données d'apprentissage étaient de 100–150 pour des prévisions ponctuelles et 200–250 pour la prédiction totale. Le SLM a montré son applicabilité à des conditions plus étendues, car il a produit une meilleure performance dans la plupart des cas. L'imputation RF a produit des performances inférieures aux autres méthodes, notamment à cause d'une couverture inférieure de l'intervalle de prévision. Ce pourrait être parce que l'imputation RF avait un certain biais et une plus petite erreur standard de prévision. La mauvaise performance de l'imputation RF ne provient pas du plus petit nombre de variables prédictives.

10 December 2020 in Forests
Verified
Journal Article
Open access
PDF file
SLSunjeoung Lee
Sunjeoung Lee
SLSeunghyun Lee
Seunghyun Lee
JSJoonghoon Shin
Joonghoon Shin
JYJongsu Yim
Jongsu Yim
JKJintaek Kang
Jintaek Kang
Research Highlights: The estimation of soil and litter carbon stocks by the Land Use, Land-Use Changes, and Forestry (LULUCF) sectors has the potential to improve reports on national greenhouse gas (GHG) inventories. Background and Objectives: Forests are carbon sinks in the LULUCF sectors and therefore can be a comparatively cost-effective means and method of GHG mitigation. Materials and Methods: This study was conducted to assess soil at 0–30 cm and litter carbon stocks using the National Forest Inventory (NFI) data and random forest (RF) models, mapping their carbon stocks. The three main types of forest in South Kora were studied, namely, coniferous, deciduous, and mixed. Results: The litter carbon stocks (t C ha−1) were 4.63 ± 0.18 for coniferous, 3.98 ± 0.15 for mixed, and 3.28 ± 0.13 for deciduous. The soil carbon stocks (t C ha−1) were 44.11 ± 1.54 for deciduous, 35.75 ± 1.60 for mixed, and 33.96 ± 1.62 for coniferous. Coniferous forests had higher litter carbon stocks while deciduous forests contained higher soil carbon stocks. The carbon storage in the soil and litter layer increased as the forest grew older; however, a significant difference was found in several age classes. For mapping the soil and litter carbon stocks, we used four random forest models, namely RF1 to RF4, and the best performing model was RF2 (root mean square error (RMSE) (t C ha−1) = 1.67 in soil carbon stocks, 1.49 in soil and litter carbon stocks). Our study indicated that elevation, accessibility class, slope, diameter at breast height, height, and growing stock are important predictors of carbon stock. Soil and litter carbon stock maps were produced using the RF2 models. Almost all prediction values were appropriated to soil and litter carbon stocks. Conclusions: Estimating and mapping the carbon stocks in the soil and litter layer using the NFI data and random forest models could be used in future national GHG inventory reports. Additionally, the data and models can estimate all carbon pools to achieve an accurate and complete national GHG inventory report.

30 June 2022 in Journal of Climate Change Research
Verified
Journal Article
Closed access
JSJoonghoon Shin
Joonghoon Shin
HHHee Han
Hee Han
YKYoung Hwan Kim
Young Hwan Kim
JYJongsu Yim
Jongsu Yim
YCYoon-Seong Chang
Yoon-Seong Chang
The purpose of this study was to quantify the uncertainty in the estimation of forest growing stock and carbon stock that occurs as DBH(Diameter at Breast Height) and HT (Height) are rounded when locating stem volumes in a stem volume table, and to present a case study using the Hongcheon-gun NFI (National Forest Inventory) data. We quantified the uncertainty of the estimated value of the stem volume obtained from the stem volume table, assuming that the stem volume calculated by the stem taper equation is the true value, and the resulting bias in carbon stock estimation, using two indicators. In all the indices, as DBH and HT increased, a trend was observed in which the absolute values of these indicators increased. BIAS appeared as a positive value in all sections, which means that the stem volume table with rounding DBH and HT underestimated stem volumes. BIAS was found to range from 0.0134m³ to 0.0178m³ depending on the species. RMSE (Root Mean Square Error) was about 4 ~ 7 times greater than BIAS with the same tree sizes. The increase rate of stem volume was almost constant regardless of HT, but increased as DBH increased. This indicates that DBH is more effective in reducing rounding-induced uncertainty when using stem volume tables. Note that rounding DBH combined with this characteristic led to systematic underestimation of stem volume. As a result of estimating the growing stock in the forests of Hongcheon-gun, Gangwon-do using the stem taper equation and the stem volume table, it was confirmed that the stem volume table underestimated the growing stock by 1,475,606m³, and accordingly, did the carbon stock by 860,232 tC. Even if the figure was limited to Hongcheon-gun, it was difficult to consider it a small value. As projects related to greenhouse gas reduction are expected to become more active in the future compared to the past, uncertainty in such estimates may affect the reliability of such projects. Therefore, it is necessary to provide a tool that can calculate stem volume and carbon stock by directly inputting DBH or HT values.

9 May 2025 in PLOS ONE
Verified
Journal Article
Open access
PDF file
JSJoonghoon Shin
Joonghoon Shin
YCYoon-Seong Chang
Yoon-Seong Chang
KLKiwoong Lee
Kiwoong Lee
DKDayoung Kim
Dayoung Kim
HHHee Han
Hee Han
This study investigates the impact of omitting short tree data on tree height estimation in conventional forest inventories, focusing on Pinus koraiensis plantations in South Korea. Twenty height-diameter models were tested on both datasets: the complete data and the short tree-free data. The models were divided into Group 1 (with two model parameters) and Group 2 (with three model parameters) to examine whether the omission of short tree data affects model performance based on the number of parameters. Results demonstrated that excluding short tree data led to significant overestimation of tree height in small diameter ranges, with Group 2 models showing greater sensitivity to the omission. This omission also caused substantial variations in model rankings between the Full and short tree-free datasets, leading to specification errors and suboptimal model selection. Despite the small sample size difference, half of the Group 2 models produced non-significant parameter estimates when fitted to the short tree-free data, underscoring the influence of sample distribution on statistical outcomes. While most models maintained consistent height-diameter relationships during extrapolation, some generated unrealistic results, including negative or excessively large tree height estimates and inverse relationships in small diameter ranges. These findings emphasize the necessity of including short trees in forest inventory samples to mitigate biases in tree height estimation, which is critical for accurate biomass and carbon stock assessments.

14 December 2022 in Forests
Verified
Journal Article
Open access
PDF file
DKDayoung Kim
Dayoung Kim
HHHee Han
Hee Han
JSJoonghoon Shin
Joonghoon Shin
YKYounghwan Kim
Younghwan Kim
YCYoon-Seong Chang
Yoon-Seong Chang
South Korea’s successful reforestation efforts over the past 50 years have led to abundant forest resources. However, intensive reforestation during the 1970s and 1980s skewed the forests’ age distribution towards forest stands aged 30 years or older, which results in an unbalanced distribution of age-class, requiring redistribution with harvest and effective regeneration plans to produce a sustained yield of timber as well as long term ecological benefits. During this conversion process, variations in timber production can occur, causing economic and ecological risks if excessive. To prevent these likely risks, permissible levels of increase and decrease in timber production can be restricted in the planning phase. In determining the appropriate variation rate in timber production, it is necessary to understand the impacts of variation in timber production on forest management. This study performed a sensitivity analysis to evaluate the economic and ecological impacts of constraining the period-to-period variation in timber production. A multi-objective linear programming (MOLP) forest management planning model was utilized to study forests in Mt. Gari, South Korea. Nine management alternatives were set with different levels of variation rate in timber production and further constraints. The total volume and net present value (NPV) of timber production, carbon storage, and water storage were analyzed for each alternative. As timber production variation rates decreased, the amount of timber production increased and forest carbon storage decreased; furthermore, NPV diminished as variation constraints strengthened. These differences were mainly caused by selection of regeneration species according to the constraint on variation in timber production. If the variation rate was strictly restricted, the area of timber species with short rotation age increased during conversion period, in order to reduce the gap of timber production between periods. At the latter part of planning horizon, the area of broad-leaved trees was enlarged as the burden of adjusting age-class structure reduced. The appropriate variation rate in timber production was determined to be 30%, based on considerations regarding the economic and ecological impact of the variation on the forest.

31 December 2022 in Journal of Climate Change Research
Verified
Journal Article
Closed access
YCYoon-Seong Chang
Yoon-Seong Chang
JSJoonghoon Shin
Joonghoon Shin
YKYoung Hwan Kim
Young Hwan Kim
The world has been paying attention to the role of forests and timber, which are nature-based carbon sinks, for the transition to a carbon-neutral society. In order to participate in global efforts to reduce greenhouse gas emissions, Korea developed a strategy for carbon neutrality in the forest sector in 2050. Long-lived wood products based on sustainable forest management could contribute to the national goal for carbon neutrality by storing carbon for a long time and replacing fossil-based carbon-intensive materials. In this study, the effect of carbon storage in wood products was analyzed according to the strategy for promoting the use of wood in the ‘A strategy for carbon neutrality in the forest sector in 2050’. With the assumption that there will be a domestic roundwood yield of 800 million m3 in 2050, if the proportion of structural sawnwood among total sawnwood usage is increased to 60%, it could secure 2.2 million tons of carbon dioxide storage by 2050. It is expected that the results of this study can be used as basic data for revitalizing wooden public buildings and establishing policies to promote the recycling of timber resources.