In recent years, light detection and ranging (LiDAR) has been increasingly utilized to estimate forest resources. This study was conducted to identify the applicability of a LiDAR sensor for such estimations by comparing data on a tree’s position, height, and diameter at breast height (DBH) obtained using the sensor with those by existing forest inventory methods for a Cryptomeria japonica forest in Jeju Island, South Korea. For this purpose, a backpack personal laser scanning device (BPLS, Greenvalley International, Model D50) was employed in a protected forest, where cutting is not allowed, as a non-invasive means, simultaneously assessing the device’s field applicability. The data collected by the sensor were divided into seven different pathway variations, or “patterns” to consider the density of the sample plots and enhance the efficiency. The accuracy of estimating the variables of each tree was then assessed. The time spent acquiring and processing real-time data was also analyzed for each method, as well as total time and the time required for each measurement. The findings showed that the rate of detection of standing trees by LiDAR was 100%. Additionally, a high statistical accuracy was observed in pattern 5 (DBH: RMSE 1.22 cm, bias—0.90 cm, Height: RMSE 1.66 m, bias—1.18 m) and pattern 7 (DBH: RMSE 1.22 cm, bias—0.92 cm, Height: RMSE 1.48 m, bias—1.23 m) compared to the results from the typical inventory method. A range of 115–162.5 min/ha was required to process the data using the LiDAR, while 322.5–567.5 min was required for the typical inventory method. Thus, the application of a backpack personal LiDAR can lead to higher efficiency when conducting a forest resource inventory in a coniferous plantation with understory vegetation. Further research in various stands is necessary to confirm the efficiency of using backpack personal laser scanning.
Research Highlights: The estimation of soil and litter carbon stocks by the Land Use, Land-Use Changes, and Forestry (LULUCF) sectors has the potential to improve reports on national greenhouse gas (GHG) inventories. Background and Objectives: Forests are carbon sinks in the LULUCF sectors and therefore can be a comparatively cost-effective means and method of GHG mitigation. Materials and Methods: This study was conducted to assess soil at 0–30 cm and litter carbon stocks using the National Forest Inventory (NFI) data and random forest (RF) models, mapping their carbon stocks. The three main types of forest in South Kora were studied, namely, coniferous, deciduous, and mixed. Results: The litter carbon stocks (t C ha−1) were 4.63 ± 0.18 for coniferous, 3.98 ± 0.15 for mixed, and 3.28 ± 0.13 for deciduous. The soil carbon stocks (t C ha−1) were 44.11 ± 1.54 for deciduous, 35.75 ± 1.60 for mixed, and 33.96 ± 1.62 for coniferous. Coniferous forests had higher litter carbon stocks while deciduous forests contained higher soil carbon stocks. The carbon storage in the soil and litter layer increased as the forest grew older; however, a significant difference was found in several age classes. For mapping the soil and litter carbon stocks, we used four random forest models, namely RF1 to RF4, and the best performing model was RF2 (root mean square error (RMSE) (t C ha−1) = 1.67 in soil carbon stocks, 1.49 in soil and litter carbon stocks). Our study indicated that elevation, accessibility class, slope, diameter at breast height, height, and growing stock are important predictors of carbon stock. Soil and litter carbon stock maps were produced using the RF2 models. Almost all prediction values were appropriated to soil and litter carbon stocks. Conclusions: Estimating and mapping the carbon stocks in the soil and litter layer using the NFI data and random forest models could be used in future national GHG inventory reports. Additionally, the data and models can estimate all carbon pools to achieve an accurate and complete national GHG inventory report.
Forest management is key to maintaining and increasing carbon sinks in forests. In the context of climate change mitigation, the exact number of carbon sinks associated with forest management is estimated as the additionality of activities, which means net greenhouse gas (GHG) removals or carbon sequestration over and above those that would have arisen even in the absence of a given activity. This study analyzes the spatial and temporal patterns of forest management activities to present the forest management ratio, of managed area to the total forest area, as an indicator of additionality in forest management in South Korea. Forest management activities based on the IPCC guidelines were spatially constructed, and the characteristics of managed and protected forests from 1990 to 2019 were analyzed. The results indicate that between the managed forests and roads, 90% of the management activities in private forests occurred within 214 m of the road, and 70% of the activities in the national forest occurred within 234 m. Management took place in easy-to-access places with gentle slopes and low elevations. The proportion of protected forests above 40 years old is 87.2%, higher than the average of 72% in South Korea, and it is expected that most forests will age and their carbon absorption capacity will decrease by 2050. The area of tree planting and thinning is approximately 290 thousand ha per year, which could potentially increase the forest management ratio by up to 4.5% per year. However, the actual increase was at an average of 1.4%, owing to the omission of exact information on management activities, such as spatial coordinates and overlapping practices in the same management unit. The forest management ratio in South Korea as of 2019 was 53.4%; therefore, the amount of GHG removal in the forest sectors was 53.4% of total absorption per year. Thus, it is necessary to make efforts to increase the ratio to enhance the contribution of forest sectors to climate change mitigation for the country.
지역은 에너지 소비와 온실가스 배출이 이루어지는 곳으로 전 세계적으로 기후변화 대응 및 적응의 주체로 그 역할이 주목받고 있다. 본 연구는 요인분해분석을 사용하여 지역의 전력 소비에 영향을 미치는 요인을 파악하고, 전력 소비를 줄일 수 있는 정책적 시사점을 제언하고자 한다. 연구 결과, 1인 가구의 증가와 경제 성장은 모든 지역의 전력 소비량 증가에 영향을 미쳤으며, GRDP당 전력 소비량인 원단위효과는 지역의 전력 소비량 감소에 기여하였다. 지역의 인구 변화는 서울특별시, 대구광역시, 부산광역시 등 인구가 감소하는 지역에서는 전력 소비량 감소 효과를 보였지만, 그 외 지역에서는 전력 소비량 증가에 영향을 미쳤다. 위와 같은 연구 결과를 바탕으로 에너지 원단위가 높은 고부가가치 산업으로의 지역 산업 구조 변화 및 1인 가구 에너지효율화 사업 등 지역의 전력 소비량을 감소시킬 수 있는 정책적 시사점을 제언하였다.