Plasmonic metasurfaces, which can be considered as the two‐dimensional analog of metal‐based metamaterials, have attracted progressively increasing attention in recent years because of the ease of fabrication and unprecedented control over the reflected or transmitted light while featuring relatively low losses even at optical wavelengths. Among all the different design approaches, gap‐surface plasmon metasurfaces – a specific branch of plasmonic metasurfaces – which consist of a subwavelength thin dielectric spacer sandwiched between an optically thick metal film and arrays of metal subwavelength elements arranged in a strictly or quasi‐periodic fashion, have gained awareness from researchers working at practically any frequency regime as its realization only requires a single lithographic step, yet with the possibility to fully control the amplitude, phase, and polarization of the reflected light. In this paper, we review the fundamentals, recent developments, and opportunities of gap‐surface plasmon metasurfaces. Starting with introducing the concept of gap‐surface plasmon metasurfaces, we present three typical gap‐surface plasmon resonators, introduce generalized Snell’s law, and explain the concept of Pancharatnam‐Berry phase. We then overview the main applications of gap‐surface plasmon metasurfaces, including beam‐steerers, flat lenses, holograms, absorbers, color printing, polarization control, surface wave couplers, and dynamically reconfigurable metasurfaces. The review is ended with a short summary and outlook on possible future developments.
Metasurfaces operating at multiple spectral ranges with integrated diversified functionalities while retaining the flexible design strategy are highly-desired within the area of modern flat optics. Here we propose and demonstrate the use of multiple gap-surface plasmon (GSP) resonances for the realization of dual-band multifunctional metasurfaces by designing GSP meta-atoms that would resonate at two different wavelengths. By tailoring nanobrick dimensions of a simple GSP meta-atom so as to enable both the first-order resonance at 1450 nm and the third-order one at 633 nm, we design phase-gradient GSP metasurfaces for polarization-independent beam steering and polarization-splitting simultaneously at telecom (1350 – 1550 nm) and visible (575 – 675 nm) wavelengths. The fabricated metasurfaces show good performance with > 65% diffraction efficiency at the first-order resonant wavelength of 1450 nm and over 50% efficiency within the telecom range of 1350 – 1550 nm, while at the third-order resonant wavelength of 633 nm the diffraction efficiency is 20% and >10% within the visible range of 575 – 675 nm. Our findings demonstrate thereby a flexible and robust approach for the realization of efficient dual-band GSP metasurfaces that can readily be combined with complex integrated designs to implement multiple functionalities highly sought after for diverse applications.
Efficient control and manipulation of light using metasurfaces requires high fabrication accuracy that becomes progressively demanding when decreasing the operation wavelength. Considering gap surface plasmon (GSP) based metasurfaces, we demonstrate that the metasurfaces, which utilize the third-order GSP resonance and thereby involve relatively large nanobricks, can successfully be used for efficient polarization-controlled steering of visible light. The reflection amplitude and phase maps for a 450 nm period array of 50 nm thick nanobricks placed atop a 40 nm thick silica layer supported by an optically thick gold film are calculated for the operation wavelength of 633 nm. Exploiting the occurrence of the third-order GSP resonance for nanobricks having their lengths close to 300 nm, we design the phase-gradient metasurface, representing an array of (450 x 2250 nm2) supercells made of 5 nanobricks with different dimensions, to operate as a polarization beam splitter for linearly polarized light. The fabricated polarization beam splitter is characterized using a supercontinuum light source at the normal light incidence and found to exhibit a polarization contrast ratio of up to 40 dB near the design wavelength of 633 nm while showing better than 20 dB contrast in the range of 550 – 650 nm for both polarizations. The diffraction efficiency experimentally measured at normal incidence exceeds 10% (20% in simulations) at the design wavelength of 633 nm, with the performance for the TE polarization (electric field perpendicular to the plane of diffraction) being significantly better (experimentally > 20% and theoretically > 40%) than for the TM polarization. This difference becomes even more pronounced for the light incidence deviating from normal. Finally, we discuss possible improvements of the performance of polarization beam splitters based on third-order GSP resonance as well as other potential applications of the suggested approach.