Radovan Kopecek

Dr. Radovan Kopecek

International Solar Energy Research Center Konstanz, Rudolf-Diesel-Straße 15, 78467 Konstanz, Germany

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 April 2021 in Energies
Verified
Journal Article
Open access
PDF file
Radovan KopecekRadovan Kopecek
Radovan Kopecek
LJLibal Joris
Libal Joris
In this paper we summarize the status of bifacial photovoltaics (PV) and explain why the move to bifaciality is unavoidable when it comes to e.g., lowest electricity generation costs or agricultural PV (AgriPV). Bifacial modules—those that are sensitive to light incident from both sides—are finally available at the same price per watt peak as their standard monofacial equivalents. The reason for this is that bifacial solar cells are the result of an evolution of crystalline Si PV cell technology and, at the same time, module producers are increasingly switching to double glass modules anyway due to the improved module lifetimes, which allows them to offer longer product warrantees. We describe the general properties of the state-of-the-art bifacial module, review the different bifacial solar cells and module technologies available on the market, and summarize their average costs. Adding complexity to a module comes with the increase of possible degradation mechanisms, requiring more thorough testing, e.g., for rear side PID (Potential Induced Degradation). We show that with the use of bifacial modules in fixed tilt systems, gains in annual energy yield of up to 30% can be expected compared to the monofacial equivalent. With the combination of bifacial modules in simple single axis tracking systems, energy yield increases of more than 40% can be expected compared to fixed tilt monofacial installations. Rudimentary simulations of bifacial systems can be performed with commercially available programs. However, when more detailed and precise simulations are required, it is necessary to use more advanced programs such as those developed at several institutes. All in all, as bifacial PV—being the most cost-effective PV solution—is now becoming also bankable, it is becoming the overall best technology for electricity generation.

21 August 2019 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
Djaber BerrianDjaber Berrian
Djaber Berrian
LJLibal Joris
Libal Joris
MKMarkus Klenk
Markus Klenk
HNHartmut Nussbaumer
Hartmut Nussbaumer
Radovan KopecekRadovan Kopecek
Radovan Kopecek
Compared with standard monofacial photovoltaic (PV) systems, the simulation of the energy yield of bifacial PV systems is more challenging since the impact of factors such as the installation height, the ground albedo, shadowing of neighbored rows, the diffuse irradiance fraction, and the PV module design is more pronounced. Therefore, many academic institutions as well as companies are currently working on the development of suitable modeling tools that allow an accurate energy yield prediction of bifacial systems. In this article, we present the results of energy-yield simulations of bifacial PV systems with fixed tilt and horizontal single-axis tracking (HSAT) in comparison to their monofacial counterparts using a tool that has been developed at ISC Konstanz. In addition, the simulated data are compared with measured results. The energy yield of fixed tilt bifacial systems is simulated as a function of the number of rows and number of modules in a row as well as a function of the installation height. The simulated data have been compared with measured data obtained using a PV system with continuously changing tilt angels. The accuracy of the simulated data is shown to be from $+/-0.1$ % to $+/-4$ % depending on the tilt angle of the bifacial modules. In addition, the energy yield of bifacial HSAT PV systems have been simulated and compared with measured data for a bifacial HSAT system in Chile. In this comparison, the use of ray tracing instead of the view factor (VF) concept for modeling of the rear irradiance reduced the deviation between simulated and measured gain significantly. Therefore, the approach of using VF-based calculations for the front irradiance and ray tracing for the rear irradiance was then used to evaluate different bifacial system configurations in comparison to monofacial ones. Especially, the influence of a variation of the ground coverage ratio on the energy yield for various monofacial, bifacial fixed tilt, and HSAT systems was studied.

22 December 2022 in Solar
Verified
Journal Article
Open access
PDF file
Radovan KopecekRadovan Kopecek
Radovan Kopecek
FBFlorian Buchholz
Florian Buchholz
VMValentin D. Mihailetchi
Valentin D. Mihailetchi
LJLibal Joris
Libal Joris
JLJan Lossen
Jan Lossen
PDPeng Dong
Peng Dong
We present our own Interdigitated Back Contact (IBC) technology, which was developed at ISC Konstanz and implemented in mass production with and at SPIC Solar in Xining, China, with production efficiencies of over 24%. To our knowledge, this is the highest efficiency achieved in the mass production of crystalline silicon solar cells without the use of charge-carrier-selective contacts. With an adapted screen-printing sequence, it is possible to achieve open-circuit voltages of over 700 mV. Advanced module technology has been developed for the IBC interconnection, which is ultimately simpler than for conventional double-sided contacted solar cells. In the next step, we will realize low-cost charge-carrier-selective contacts for both polarities in a simple sequence using processes developed and patented at ISC Konstanz. With the industrialisation of this process, it will be possible to achieve efficiencies well above 25% at low cost. We will show that with the replacement of silver screen-printed contacts by copper or aluminium metallisation, future IBC technology will be the end product for the PV market, as it is the best performing c-Si technology, leading to the lowest cost of electricity, even in utility-scale applications.

23 January 2018 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
VMValentin D. Mihailetchi
Valentin D. Mihailetchi
HCHaifeng Chu
Haifeng Chu
JLJan Lossen
Jan Lossen
Radovan KopecekRadovan Kopecek
Radovan Kopecek
An in situ oxidation during the boron tribromide diffusion process to form $\text{p}^{+}$-doped junctions on crystalline Si solar cells leads to the formation of a layer stack system consisting of a borosilicate glass (BSG) (a binary B$_{2}$O$_{3}$–SiO$_{2}$ system) and a SiO$_{2}$ layer at the Si interface. We present a method to passivate the $\text{p}^{+}$-doped regions by using this in situ grown SiO$_{2}$ in combination with a plasma-enhanced-chemical-vapor-deposited SiN$_{x}$ layer. We show that the etching rate of the BSG layer, in a hydrofluoric acid solution, varies over the wafer. The etching rate depends on its local B$_{2}$O$_{3}$ content in the BSG and is markedly higher than that of the SiO$_{2}$ layer. This difference in the etching rates can be used to controllably etch back the BSG layer in order to obtain a thin and uniform passivating oxide layer for solar cell application. Using this oxide/SiN$_{x}$ stack, we obtained implied $V_{\text{oc}}$ of 705 mV and $J_{0e}$ as low as 14 fA/cm$^{2}$ on symmetrically diffused boron emitters on $\text{n}$-type Czochralski wafers. These passivation results are comparable, on similar structure and boron emitters, with state-of-the-art Al$_{2}$O$_{3}$-based passivation methods. Moreover, we have successfully implemented this passivation method in the fabrication of n-type passivated emitter and rear totally diffused and interdigitated back contact solar cells, avoiding the need of adopting additional process steps and costs for boron emitter passivation.

13 June 2019 in IEEE Journal of Photovoltaics
Verified
Journal Article
Closed access
ZPZih-Wei Peng
Zih-Wei Peng
TBThomas Buck
Thomas Buck
LKLejo J. Koduvelikulathu
Lejo J. Koduvelikulathu
VMValentin D. Mihailetchi
Valentin D. Mihailetchi
Radovan KopecekRadovan Kopecek
Radovan Kopecek
Stable high voltages in solar cells can be transferred directly to modules with no losses and are becoming increasingly important. Solar cells with high voltages have lower temperature coefficients and therefore higher energy yield in PV systems, particularly for those exposed to high temperatures (e.g., in desert regions). This paper presents the optimization of a large area n-type passivated emitter rear and totally diffused rear-junction (n-PERT-RJ) solar cell to reach open-circuit voltages exceeding 690 mV and 22% stable solar cell efficiencies by using industrial diffusions and screen-printed metallization on both sides. With a free energy loss analysis and Quokka3 simulations, the recombination and resistive loss mechanisms in the n-PERT-RJ solar cells are identified and a guideline for future development is given, showing a practical roadmap toward 700 mV open-circuit voltages and solar cell efficiencies approaching 23%.

14 July 2021 in Energies
Verified
Journal Article
Open access
PDF file
Christin DavidChristin David
Christin David
LKLejo Joseph Koduvelikulathu
Lejo Joseph Koduvelikulathu
Radovan KopecekRadovan Kopecek
Radovan Kopecek
Particle layers employing conductive transition metal nitrides have been proposed as possible alternative plasmonic materials for photovoltaic applications due to their reduced losses compared to metal nanostructures. We critically compare the potential photocurrent gain from an additional layer made of nanopillars of nitrides with other material classes obtained in an optimized c-Si baseline solar cell, considering an experimental doping profile. A relative photocurrent gain enhancement of on average 5% to 10% is observed, achieving for a few scenarios around 30% gain. The local field enhancement is moderate around the resonances for nitrides which spread over the whole ultraviolet and visible range. We can characterize two types of nitrides: nitrides for which the shading effect remains a problem similar to for metals, and others which behave like dielectric scatterers with high photocurrent gain.