Yulia Tertyshnaya

Dr. Yulia Tertyshnaya

Institute of Biochemical Physics RAS, Moscow, Russia
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 January 2021 in Polymers
Verified
Journal Article
Open access
PDF file
YTYulia Tertyshnaya
Yulia Tertyshnaya
MPMaria Podzorova
Maria Podzorova
Maksim MoskovskiyMaksim Moskovskiy
Maksim Moskovskiy
A nonwoven fiber made of polylactide/natural rubber with a rubber content from 0 to 15 wt.% was obtained by electrospinning from a solution. The water sorption test showed that the addition of natural rubber into the polylactide matrix did not significantly affect the degree of water absorption of the fibers, which was in the range of 48.9–50.6%. The melt flow rate only increased by 0.5 g/10 min at a content of 15 wt.% natural rubber. The thermal characteristics after 120 days of degradation in distilled water and UV irradiation (50 h) at a wavelength of 365 nm were determined using differential scanning calorimetry. Changes in the values of the phase transition temperatures and the degree of crystallinity were determined. It was determined that the fiber samples from all compositions retained the propensity for photo- and hydrolytic degradation.

1 January 2020 in Russian Journal of Physical Chemistry B
Verified
Journal Article
Closed access
PDF file
YTYulia Tertyshnaya
Yulia Tertyshnaya
MPM. V. Podzorova
M. V. Podzorova
Polylactide–low density polyethylene binary blends were obtained in various ratios. The phase transition temperatures in the starting mixtures and after UV irradiation were determined by differential scanning calorimetry. After UV irradiation for 50 h, the melting point of polylactide decreased from 165 to 153°C, while the thermophysical characteristics of polyethylene changed insignificantly. The structure was monitored by IR spectroscopy during photodegradation. The most probable mechanism for the decomposition of polylactide with C=C bond formation corresponding to the 1654 cm–1 peak in the IR spectrum was proposed.

1 September 2014 in Russian Journal of Physical Chemistry B
Verified
Journal Article
Closed access
PDF file
Maria PodzorovaMaria Podzorova
Maria Podzorova
YTYulia Tertyshnaya
Yulia Tertyshnaya
APA. A. Popov
A. A. Popov
A review of data on the thermo, photo-, and biodegradation of compositions of synthetic polymers with poly-3-hydroxybutyrate and poly(lactic acid) is presented. The influence of these polymers on the...

1 March 2013 in Polymer Science, Series B
Verified
Journal Article
Closed access
PDF file
YTYulia Tertyshnaya
Yulia Tertyshnaya
LSL. S. Shibryaeva
L. S. Shibryaeva
The degradation of films of poly(3-hydroxybutyrate) and its blends with ethylene-propylene rubber during their treatment with water and UV radiation at 20 and 90°C is studied. Changes in the structural characteristics of both components during degradation are investigated via DSC, IR spectroscopy, and optical microscopy. It is shown that pure poly(3-hydroxybutyrate) features the highest weight loss during degradation in distilled water at 20°C. In the case of the blends, the most significant changes in the structures of the components are observed for the 50: 50 (wt %) sample.

7 July 2021 in Polymers
Verified
Journal Article
Open access
PDF file
YTYulia Tertyshnaya
Yulia Tertyshnaya
SKSvetlana G. Karpova
Svetlana G. Karpova
Maksim MoskovskiyMaksim Moskovskiy
Maksim Moskovskiy
AIAndrey Yrievich Izmailov
Andrey Yrievich Izmailov
Non-woven polylactide-natural rubber fiber materials with a rubber content of 5, 10 and 15 wt.% were obtained by electrospinning. The thermal, dynamic, and mechanical properties of the fibers were determined. It was shown that the average fiber diameter increased with adding of the NR content, while the linear and surface densities changed slightly. Using the differential scanning calorimetry, the thermal characteristics were obtained. It was found that the glass transition temperature of polylactide increased by 2–5 °C, and the melting temperature increased by 2–4 °C in the presence of natural rubber in the samples. By the method of electronic paramagnetic resonance at T = 50 and 70 °C it was determined that the mobility of the amorphous phase in PLA/NR fibers increased with the addition of NR. The adding of NR at a content of 15 wt.% increased the value of elongation at break by 3.5 times compared to pure PLA.

7 March 2022 in Polymers
Verified
Journal Article
Open access
PDF file
YTYulia Tertyshnaya
Yulia Tertyshnaya
SKSvetlana G. Karpova
Svetlana G. Karpova
MPMaria V. Podzorova
Maria V. Podzorova
AKAnatoliy V. Khvatov
Anatoliy V. Khvatov
Maksim MoskovskiyMaksim Moskovskiy
Maksim Moskovskiy
In this work, PLA/NR electrospun fibers were used as substrates for growing basil. Thermal characteristics of initial samples and after 60 and 220 days of degradation were determined using differential scanning calorimetry. In the process of disintegration, the melting and glass transition temperatures in PLA/NR composites decreased, and in PLA fibers these values increased slightly. TGA analysis in an argon environment confirmed the effect of NR on the thermal degradation of PLA/NR fibers. After exposure to the soil for 220 days, the beginning of degradation shifted to the low-temperature region. The dynamic characteristics of the fibers were determined by the EPR method. A decrease in the correlation time of the probe-radical in comparison with the initial samples was shown. FTIR spectroscopy was used to analyze the chemical structure before and after degradation in soil. In PLA/NR fibrous substrates, there was a decrease in the intensity of the bands corresponding to the PLA matrix and the appearance of N-H C-N groups due to biodegradation by soil microorganisms.