The construction of a multifunctional two-dimensional (2D) composite photocatalyst is of great significance because such a composite can exhibit enhanced catalytic performance and improved practical usability in contrast to a single component catalyst. Herein, a ternary photocatalyst composed of g-C3N4, a carbon layer (C), and Fe3O4 nanoparticles was successfully synthesized by a facile one-pot hydrothermal carbonization (HTC) method from g-C3N4, glucose, and FeCl3. The resultant composite, Fe3O4/C/g-C3N4, had an ordered 2D heterostructure and exhibited enhanced visible-light-driven photocatalytic performances and good magnetic recyclability. The kobs for Cr(VI) photoreduction (or dimethoate photodegradation) over Fe3O4/C/g-C3N4 was 20.9-fold (or 2.1-fold) of that over g-C3N4. Comparative study of Fe3O4/C/g-C3N4, C/g-C3N4, and g-C3N4 on their optoelectronic properties revealed that this enhanced photocatalytic activity was mainly due to rapid photogenerated electron transport from the g-C3N4 component to carbon and/or Fe3O4, which effectively suppressed the recombination of photogenerated electrons and holes. In addition, the good surface adsorption capacity of the carbon component towards Cr(VI) also contributed to Cr(VI) photoreduction over Fe3O4/C/g-C3N4. Finally, a reasonable photocatalytic reaction mechanism of Fe3O4/C/g-C3N4 was proposed based on the results of trapping experiments. This study is not only limited to developing a high-performance g-C3N4 based photocatalyst, but also expected to provide a green, facile, and cost-efficient strategy to combine 2D materials with a carbonaceous layer and other functional components for a multifunctional system.
Well-designed composite catalysts are of increasing concern due to their improved performance compared to individual components. Herein, we designed and synthesized an Fe3O4@MoS2 composite via a simple hydrothermal method. As for the resultant composite, the MoS2 nanolayers presented a novel piezo-catalytic effect, while the Fe3O4 core provided a magnetic separation property. The structure and properties of Fe3O4@MoS2 were determined by relevant experiments. It was found that Fe3O4@MoS2 exhibited enhanced piezo-catalytic degradation of rhodamine B and good magnetic recovery/recycling features. The kobs for rhodamine B degradation over Fe3O4@MoS2 was 0.019 min−1—a little longer than that over MoS2 (0.013 min−1). Moreover, Fe3O4@MoS2 also showed a favorable ability to adsorb rhodamine B in solution, with a saturation adsorption of 26.8 mg/g. Further studies revealed that piezo-electrons, holes, and superoxide anions were key species in the piezo-catalytic degradation of rhodamine B. Notably, the step where oxygen trapped electrons to produce superoxide anions had a significant impact on the degradation of the dye. This work, not limited to the development of a high-performance MoS2-based piezo-catalyst, is expected to provide new insights into the working mechanisms and process profiles of composite piezo-catalysts.
The bacterial membrane-targeted polyhexamethylene guanidine hydrochloride (PHGH) and its novel analog polyoctamethylene guanidine hydrochloride (POGH) had excellent antimicrobial activities against antibiotics-resistant bacteria. However, the biocompatibility aspects of PHGH and POGH on the phospholipid membrane of the eukaryotic cell have not yet been considered. Four chemically synthesized cationic oligoguanidine polymers containing alkyl group with different carbon chain lengths, including PHGH, POGH, and their two analogs, were used to determine their interactions with zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) phospholipids vesicles mimicking the eukaryotic cell membrane. Characterization was conducted by using bactericidal dynamics, hemolysis testing, calcein dye leakage, and isothermal titration calorimetry. Results showed that the gradually lengthened alkyl carbon chain of four oligoguanidine polymers increased the biocidal activity of the polymer, accompanied with the increased hemolytic activity, calcein dye leakage rate and the increased absolute value of the exothermic effect of polymer-POPC membrane interaction. The thermodynamic curve of the polymer-POPC membrane interaction exhibited a very weak exothermic effect and a poorly unsaturated titration curve, which indicated that four guanidine polymers had weak affinity for zwitterionic POPC vesicles. Generally, PHGH of four guanidine polymers had high biocidal activity and relatively high biocompatibility. This study emphasized that appropriate amphiphilicity balanced by the alkyl chain length, and the positive charge is important factor for the biocompatibility of cationic antimicrobial guanidine polymer. Both PHGH and POGH exhibited destructive power to phospholipid membrane of eukaryotic cell, which should be considered in their industry applications.
7 January 2018 in Environmental Monitoring and Assessment
Protein-based framework hydrogels often exhibit limitations in mechanical strength and biocompatibility, particularly in applications related to medicine, industry, and environmental engineering. To overcome these challenges, the incorporation of natural biological macromolecules has emerged as an effective strategy for enhancing the hydrogel performance. Specifically, mimicking the natural biomineralization process enables the fabrication of tough hydrogels through biomimetic calcium deposition. In this study, we developed a mechanically robust hydrogel by photopolymerizing methacrylated silk fibroin and embedding a recombinant fusion protein, engineered by integrating a chitin-binding domain into Escherichia coli alkaline phosphatase. This fusion protein was successfully immobilized within the hydrogel matrix without leakage, facilitated by the substantial molecular size of nanochitin. Enzyme-mediated mineralization within the hydrogel matrix led to the formation of an organic–inorganic hybrid material characterized by a stable macromolecular network and uniform gel structure. Characterization using Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS), and thermogravimetric analysis (TGA) confirmed the successful in situ formation of hydroxyapatite, with a mineralization content of approximately 60%, homogeneously distributed throughout the silk fibroin network despite some initial brittleness. Notably, a freeze–thaw treatment applied over three cycles significantly improved the mechanical properties of the mineralized hydrogel, increasing its compressive strength by up to 7-fold and enhancing the compressive modulus from 1.1 to 2.2 MPa. Furthermore, cell viability assays demonstrated no significant cytotoxicity toward rat bone-marrow-derived mesenchymal stem cells, underscoring the potential of this composite hydrogel for applications in tissue engineering, particularly for complex bone tissue regeneration.
Well-designed composite photocatalysts are of increasing concern due to their enhanced catalytic performance compared to a single component. Here, a photocatalyst composed of PbMoO4 (PMO) and poly-benzothiadiazole (BBT, a D-A-conjugated polymer) was successfully synthesized by BBT polymerization on the surface of the PMO. The resultant BBT-PMO with a heterojunction structure represented an enhanced ability to reduce highly toxic heavy metal Cr(VI) from water under visible light irradiation. The 16.7% BBT-PMO(N, nanoscale) showed the best performance. The corresponding kobs over the 16.7% BBT-PMO(N) was 26-fold (or 53-fold) of that over the pure BBT (or pristine PMO(N)), and this activity was maintained after four cycles. The reasons for its good performance are discussed in detail based on the experimental results. Moreover, the synthesis of the BBT in situ of the PMO also altered the morphology of the BBT component, increasing the specific surface area of the BBT-PMO(N) and endowing it with the ability to adsorb Cr(VI). Additionally, the photocatalyst was also environmentally friendly as such a wrapped structure could sustain the high stability of the PMO without dissociation. This work provides a good strategy for efficient photocatalytic Cr(VI) reduction by designing an organic–inorganic hybrid system with high redox capacity.