Systematic and deep understanding of mechanical properties of the negative Poisson’s ratio convex-concave foams plays a very important role for their practical engineering applications. However, in the open literature, only a negative Poisson’s ratio effect of the metamaterials convex-concave foams is simply mentioned. In this paper, through the experimental and finite element methods, effects of geometrical morphology on elastic moduli, energy absorption, and damage properties of the convex-concave foams are systematically studied. Results show that negative Poisson’s ratio, energy absorption, and damage properties of the convex-concave foams could be tuned simultaneously through adjusting the chord height to span ratio of the sine-shaped cell edges. By the rational design of the negative Poisson’s ratio, when compared to the conventional open-cell foams of equal mass, convex-concave foams could have the combined advantages of relative high stiffness and strength, enhanced energy absorption and damage resistance. The research of this paper provides theoretical foundations for optimization design of the mechanical properties of the convex-concave foams and thus could facilitate their practical applications in the engineering fields.
1 August 2018 in International Journal of Hydrogen Energy
Copper nanowires (CuNWs) are remarkable components that can replace indium tin oxide as transparent electrodes due to their low cost, high conductivity and acceptable transmittance. However, a common coating method can cause poor electrical, optical and adhesive properties because of the creation of loosely connected junctions. In addition, the unsatisfactory thermal and environmental stabilities limit the practical applications. These problems should be overcome in CuNW-based films for reliable transparent electrodes through material and engineering approaches. In this work, a novel transparent composite electrode composed of chitosan and CuNWs on a flexible polyethylene terephthalate (PET) substrate, with synchronously strengthened adhesion, as well as heightened transmittance, reduced resistivity, improved flexibility, enhanced thermal stability and increased environmental stability, was prepared without vacuum processing and high-temperature annealing. The effects of the number of CuNW network layers and chitosan concentration on the performance of chitosan/CuNW composite transparent electrodes were studied. The resulting electrodes exhibitan excellent conductivity (sheet resistance: 15.6 Ω sq −1 ) and a superior optical transmittance (∼87%) at 550 nm. Calculation of the figure of merit displays a high value of 168, which is the highest among all the reported CuNW-based transparent electrodes. Meanwhile, the sheet resistance did not show great change after 10 tape tests and 10 000 bending cycles, suggesting good adhesion to the PET substrate and outstanding mechanical flexibility. Moreover, the composite transparent electrodes show good stability to resist long-term storage and temperature variation in thermal environment.